Let's do Bavaria - and a bit more

    Ok... let us make a funding... =O

    8.3 Digitales Orthophoto (DOP) 8.3.1 DOP 20 – Echtfarben oder Color-Infrarot Bodenauflösung 20 cm

    km² 9,00 €

    bayernweit 99 000,00 €

    8.4.1 DGM 1 (1 m-Gitter) km² 80,00 €

    bayernweit 960 000,00 €

    Approximately 1.000.000 € for Bavaria Ortho and Elevation Mesh.

    https://www.ldbv.bayern.de/produkte/3dprodukte/gelaende.html

    Come on guys, let the Rubel roll... 8o

    Wish for Aerofly FS 2/4:

    - Flightpath recording on hard drive and replay in sim from different view points

    - Smoke for aerobatic planes

    - Multiplayer or at least watching other people flying sitting on ground or inside tower

    Don't think I will leave Bavaria because I get stuck in the Airport-Pub in Tanzania. ;)

    Quelle Wikipedia: https://en.wikipedia.org/wiki/Kigoma_Airport

    Bavaria Northwest will, like the others, also include the rest of the level 7 tiles. In this case it will be also EDDS Stuttgart and EDDF Frankfurt. ^^

    Wish for Aerofly FS 2/4:

    - Flightpath recording on hard drive and replay in sim from different view points

    - Smoke for aerobatic planes

    - Multiplayer or at least watching other people flying sitting on ground or inside tower

    Last day in competition judging. One week without a computer. 8)

    Wish for Aerofly FS 2/4:

    - Flightpath recording on hard drive and replay in sim from different view points

    - Smoke for aerobatic planes

    - Multiplayer or at least watching other people flying sitting on ground or inside tower

    Currently North-West with Frankfurt/Main is not finished.

    Just in time to the elections in Bavaria, I finished the last part of Bavaria. Around 50 GB with Ortho-Pictures I can not distribute and around 1.3 GB cultivation and approximately 400 airfield data. This will replace my existing packages to make an all in one, although I don't know if I can upload this size to flight-sim.org. If not, I need to split it.

    If someone is developing an airport in detail in this area, just give me a hint and I can offer a cultivation fix so you have no generic cultivation buildings at the airport.

    I guess it should be available this week.

    Aerofly FS 2 Addon Scenery flightXtreme

    Bavaria (Bayern) V1.0

    Download:

    http://www.flightxtreme.com/BavariaV1.zip

    (ZIP is too big for flight-sim.org at the moment.)

    Included are more than 400 (very) basic airport data and cultivation of the whole area.
    This pack replace all of my previous Level 7 Bavaria packages, please delete them before installing this.

    Sadly I cannot provide you with the photo scenery. You need to
    build it on your own, tools an help can be found on the IPACS Aerofly homepage.

    If you have already an airport scenery in this area, simply rename
    the ...tsc file to ...off so the file from this package will not be used by the sim.

    Install: Copy the content of the "scenery" folder from this ZIP into your addon "scenery" folder of your aerofly fs 2.

    Be careful to place also the building_textures folder in the correct place, the ZIP include the correct layout.

    Thanks to TomSimMuc that I can include some of his FSCloudPort Airports.
    For reference: http://www.fscloudport.com/

    If you have IPACS Switzerland:
    There could be some duplicated cultivations.
    If so, try to turn of TOC Files by renaming them to 'off'
    Also turn off (rename from ...tsc to ...off all airports,
    already covered by IPACS Switzerland:
    LSMF_Mollis
    LSZX_Schaenis
    LSMD_Duebendorf
    LSZH_Zuerich Kloten
    LSZK_Speck-Fehraltorf
    LSZR_St Gallen

    If you have ORBX Innsbruck you can make it compatible by:

    Option 1: Rename the files:
    scenery\flightXtreme\places\L7_8800_A600\L9_8800_A680\cul_8800_A6C0.toc
    scenery\flightXtreme\places\L7_8800_A600\L9_8800_A680\cul_8800_A680.toc
    scenery\flightXtreme\places\L7_8800_A600\L9_8800_A680\cul_8840_A6C0.toc
    scenery\flightXtreme\places\L7_8800_A600\L9_8800_A680\cul_8840_A680.toc
    to:
    scenery\places\eu_fXt\L7_8800_A600\L9_8800_A680\cul_8800_A6C0.off
    scenery\places\eu_fXt\L7_8800_A600\L9_8800_A680\cul_8800_A680.off
    scenery\places\eu_fXt\L7_8800_A600\L9_8800_A680\cul_8840_A6C0.off
    scenery\places\eu_fXt\L7_8800_A600\L9_8800_A680\cul_8840_A680.off

    OR

    Option 2: Rename this file in ORBX:
    scenery\orbx_lowi\places\innsbruck\innsbruck.toc
    to:
    scenery\orbx_lowi\places\innsbruck\innsbruck.off

    This is to remove flickering cultivation.
    (Sadly I cannot look into the innsbruck toc file to see the exact boundary of the cultivation.
    So it can be necessary to turn of other cul_... files if you choose option 1.)

    There is an aerobatic box in Straubing, if you want to delete it, remove the folder:
    L9_8880_A800\AerobaticBox_EDMS\

    If you don't want to have so much airports and airfields in you sim you can remove unwanted places by scanning the ICAO Code:
    ED.. -> Public airports, airfields and airstrips.
    ET.. -> Military airfields
    EDU000 -> Ultra light airstrips
    EDS000 -> Glider airstrips
    EDP000 -> Power and RC airstrips

    I have not really take care to identify closed airports. So be careful where you land.

    ------------------------------------------------------------------------------------------

    If you have improved airport files or other landscape objects you want to provide,

    so I can include it into a future package, it is welcome.

    Use it on your own risk, I take no warranty.

    (c) 2018 flightXtreme
    micha@flightxtreme.com

    ----------------------------------------------------------------------------------------
    If you want the photo scenery, use this data to build it for example with the tool FSET:

    Name: 8600_A600
    Level: 7
    Ref Point:
    Latitude: 46.7444003950914
    Longitude: 8.4375
    BoundingBox: (minX;maxX;minY;maxY)
    8.4375;11.25;46.7444003950914;48.6138704750471
    Height: 207.719 km
    Top width: 206.603 km
    Bottom width: 214.142 km

    Name: 8800_A600

    Level: 7
    Ref Point:
    Latitude: 46.7444003950914
    Longitude: 11.25
    BoundingBox: (minX;maxX;minY;maxY)
    11.25;14.0625;46.7444003950914;48.6138704750471
    Height: 207.719 km
    Top width: 206.603 km
    Bottom width: 214.142 km

    Name: 8800_A800

    Level: 7
    Ref Point:
    Latitude: 48.6138704750471
    Longitude: 11.25
    BoundingBox: (minX;maxX;minY;maxY)
    11.25;14.0625;48.6138704750471;50.4196551137595
    Height: 200.643 km
    Top width: 199.112 km
    Bottom width: 206.603 km

    Name: 8600_A800

    Level: 7
    Ref Point:
    Latitude: 48.6138704750471
    Longitude: 8.4375
    BoundingBox: (minX;maxX;minY;maxY)
    8.4375;11.25;48.6138704750471;50.4196551137595
    Height: 200.643 km
    Top width: 199.112 km
    Bottom width: 206.603 km

    For reference you can also use the included Google Earth file: Bavaria.kml

    Ok, now the same package is on flight-sim.com, only I had to split it into two packages.

    Ooopsi, one day this area was gone....

    https://flight-sim.org/filebase/index…0-missing-area/

    Wish for Aerofly FS 2/4:

    - Flightpath recording on hard drive and replay in sim from different view points

    - Smoke for aerobatic planes

    - Multiplayer or at least watching other people flying sitting on ground or inside tower

    What exactly? Airports and Cultivations from AFFS 2 are not usable in Aerofly FS 4. But AFFS 4 gives you cultivation out of the box.

    Wish for Aerofly FS 2/4:

    - Flightpath recording on hard drive and replay in sim from different view points

    - Smoke for aerobatic planes

    - Multiplayer or at least watching other people flying sitting on ground or inside tower

    I build cultivation and airports for Bavaria. These are not compatible.

    The pictures showing also ortho scenery created with the tool "AeroScenery". But I did not upload these. That would be 30 GB Data.

    In Aerofly FS4 you will see buildings and trees (cultivation) and an ortho scenery with a bit lower resolution out of the box.

    Possibly you want to build your own aeroscenery for this.

    Wish for Aerofly FS 2/4:

    - Flightpath recording on hard drive and replay in sim from different view points

    - Smoke for aerobatic planes

    - Multiplayer or at least watching other people flying sitting on ground or inside tower