When I tried to load the S-211 today I kept getting the cessna instead... the beta has had some updates lately... perhaps there is a conflict of some kind now. Anyone else had this?
Matt
When I tried to load the S-211 today I kept getting the cessna instead... the beta has had some updates lately... perhaps there is a conflict of some kind now. Anyone else had this?
Matt
Just tried it. Worked fine with the beta
Same problem ,211 when it finishes the 172 is loaded. Also running beta
What are the tm.log errors and which aerofly version are you using?
Just tried it. Worked fine with the beta
Not working for me. I get the Cessna....
I get the Cessna also. reloaded from developer site, still get Cessna.
Regards,
Ray
Most recent update, non beta. ver 2.04.05.15 (20190213)
here's my TM log. I think my version is same as Jetjocky...via Steam Beta update
Matt
The same happend to me with 2.04.05.15 and the DO 27
16.00-tmimage: loading model do27...
16.00-tmmodelmanager: model: (name='do27') (directory='C:/Users/thomas/Documents/Aerofly FS 2/aircraft/do27//')
16.00-tmimage: loading configfile 'C:/Users/thomas/Documents/Aerofly FS 2/aircraft/do27///do27.tmc'
16.00-tmmodule: contact points 3: (1.371 0.000 -0.545 r=0.180) (-0.260 1.212 -0.570 r=0.160) (-0.260 -1.212 -0.570 r=0.160)
16.83-tmimage: loading dynamics begin 'C:/Users/thomas/Documents/Aerofly FS 2/aircraft/do27///do27.tmd'...
16.83-tmcollision: ERROR: geometry 'FlapHandleButton' not found
16.83-tmcollision: ERROR: cannot link ' FlapHandleButton '
16.83-tmcollision: ERROR: geometry 'RightStickBase' not found
16.83-tmcollision: ERROR: object 'RightStickBase' not found
16.83-tmcollision: ERROR: geometry 'RightStickTop' not found
16.83-tmcollision: ERROR: object 'RightStickTop' not found
Most recent update, non beta. ver 2.04.05.15 (20190213)
You seem to be loading a Bleriot aircraft and not the S-211, is that correct?
I am guessing that is Krysk's aircraft, he might want to take a look at that.
here's my TM log. I think my version is same as Jetjocky...via Steam Beta update
Matt
There are errors in the tmd file, it aborts the loading and selects the cessna after the loading failed. I'll check these out and correct them.
Where did you download your Do 27 aircraft from?
788.90-tmimage: loading dynamics begin 'C:/Users/Matthew.DESKTOP-CPB4G3T/Documents/Aerofly FS 2/aircraft/s211///s211.tmd'...
788.95-tmcollision: ERROR: object 'DriveShaft' not found
788.97-tmcollision: ERROR: property 'DriveShaft.RotationSpeed' not found
788.99-tmcollision: ERROR: object 'DriveShaft' not found
789.01-tmcollision: ERROR: property 'DriveShaft.AddTorque' not found
Display MoreThe same happend to me with 2.04.05.15 and the DO 27
16.00-tmimage: loading model do27...
16.00-tmmodelmanager: model: (name='do27') (directory='C:/Users/thomas/Documents/Aerofly FS 2/aircraft/do27//')
16.00-tmimage: loading configfile 'C:/Users/thomas/Documents/Aerofly FS 2/aircraft/do27///do27.tmc'
16.00-tmmodule: contact points 3: (1.371 0.000 -0.545 r=0.180) (-0.260 1.212 -0.570 r=0.160) (-0.260 -1.212 -0.570 r=0.160)
16.83-tmimage: loading dynamics begin 'C:/Users/thomas/Documents/Aerofly FS 2/aircraft/do27///do27.tmd'...
16.83-tmcollision: ERROR: geometry 'FlapHandleButton' not found
16.83-tmcollision: ERROR: cannot link ' FlapHandleButton '
16.83-tmcollision: ERROR: geometry 'RightStickBase' not found
16.83-tmcollision: ERROR: object 'RightStickBase' not found
16.83-tmcollision: ERROR: geometry 'RightStickTop' not found
16.83-tmcollision: ERROR: object 'RightStickTop' not found
These log errors are different to what MDIvey had, where did you download the Do 27 aircraft from?
Oh and by the way, the do 27, s-211 and f104g load just fine on my end with the latest Steam version 2.04.05.15
Maybe the downloads from flight-sim.org and my website aerofly-sim.de differ and my versions just don't have these log errors and the flight-sim.org ones do? If you download the s-211 and do 27from my site, do they load properly for you?
Re S211... I have a feeling that Dino uploaded an update to his site and I downloaded that. I'll try your version and just add the extra liveries from his update.
Matt
Yes Dino uploaded an update
Guys,
we here at IPACS will always try to assist users with pretty much anything but this is not a core issue with Aerofly but rather an issue with a user made aircraft. Any direct support for this should come directly from the aircraft developer. It's taking up a lot of resources on our end to try to help here.
I've tried the S211 on Jetpacks site and it works ok. The problem seems to be there are a number of versions available and not all work with current Beta... not your problem but I appreciate Jans help in working that out.
Matt
I've tried the S211 on Jetpacks site and it works ok. The problem seems to be there are a number of versions available and not all work with current Beta... not your problem but I appreciate Jans help in working that out.
Matt
Of course, and Jan i'm sure will see this through. The developer of this aircraft just needs to clean up his other versions and have only one that he tested and confirmed that its working with the current Aerofly build. We should be assisting the developer here not the users that it doesn't work for if that makes sense
Of course, and Jan i'm sure will see this through. The developer of this aircraft just needs to clean up his other versions and have only one that he tested and confirmed that its working with the current Aerofly build. We should be assisting the developer here not the users that it doesn't work for if that makes sense
possibly it would be good to have here a section for help with third party addon - with a disclaimer, that IPACS is not directly helping here but it would be a place where the users can try to help each other or the developer of the third party addon?