This error has been reported before with no reply on whether a fix is being considered or not. The directional gyro bounces about like a compass and the compass is steady as a rock, like a gyro instrument. Unfortunately the instrument adjustors do not function properly either. The (real) compass instrument does not rotate the twin bar heading bug but swings what should be the compass needle and the (real) directional gyro adjuster is non functional.
Can the false bounce and north/south lively/sluggish action on the (real) directional gyro be turned off via editing the .tmd file? Is " <[float64][MaximumTilt][0.001]> " the bounce control line and is it safe to adjust it to zero or a different value.
If the bounce was turned off the annoying distraction would be partially cured but the rock steady (real) compass would remain. Is there a user alteration that would make the (real) compass bouncy?
// navigation instruments start
// compass
<[magnetic_compass][MagneticCompass][]
<[string8][Body][Fuselage]>
<[tmvector3d][R0][ -0.0378 0.1124 0.7525 ]>
<[float64][MaximumTilt][0.001]>
>
<[input_knob][MagneticCompassKnob][]
<[string8][Input][MagneticCompass.Adjust]>
<[float64][InputValue][1.0]>
>
// heading
<[heading_indicator][HeadingIndicator][]
<[string8][Body][Fuselage]>
>
<[output][HeadingAngle][]
<[string8][Input][HeadingIndicator.MagneticHeading]>
>
<[input_cyclic][DirectionalGyroAdjust][]
<[string8][Input][DirectionalGyroAdjust]>
<[tmvector2d][Range][ 0.0 6.283185 ]>
<[uint][StepSize][0.01745329222]>
>
<[output_free][DirectionalGyroAdjustOutput][]
<[string8][Input][DirectionalGyroAdjust.Output]>
>
<[sender][SenderMagneticHeading][]
<[string8][Input][HeadingIndicator.MagneticHeading]>
<[string8][Message][Aircraft.MagneticHeading]>
>
// navigation instruments end