Wie aktivieren?
-
-
- Official Post
Hallo Jürgen,
da muss nichts aktiviert werden.
Wenn Du die richtige Version hast . . .
und der User-Ordner existiert . . .
dieser im Ordner config . . .
in der Datei main.mcf richtig eingetragen ist, . . .
dann erscheint automatisch der Bereich Eigene Modelle im Auswahl-Menü.
Das ist wie beim RC 7.
Gruß
Arthur
-
Danke!
Ich habe vor einer Stunde auf 08.0.19 .1 upgedatet, vorher keine eigenen Modelle gebraucht.
Aber im Aircraft Ordner war war ein Fehler, Ordner im Ordner, sorry.
Nun OK!
Aber Trotzdem noch die Frage:
Müssen RC7 Modelle geändert werden?
Gruss Jürgen
-
- Official Post
Ja, die Modelle müssen konvertiert werden (tmc --> tmb) und einige Änderungen müssen noch per Hand vorgenommen werden (tmc, tmd, tps).
Ich werde jetzt nach und nach meine Modelle in den Download-Bereich stellen. Was mit den anderen wird, ist noch nicht ganz klar. Ich habe die anderen Modell-Ersteller kontaktiert und sie über die notwendigen Änderungen informiert.
Gruß
Arthur
-
Here is the problem:
Ja, die Modelle müssen konvertiert werden (tmc --> tmb) und einige Änderungen müssen noch per Hand vorgenommen werden (tmc, tmd, tps).
Ich werde jetzt nach und nach meine Modelle in den Download-Bereich stellen. Was mit den anderen wird, ist noch nicht ganz klar. Ich habe die anderen Modell-Ersteller kontaktiert und sie über die notwendigen Änderungen informiert.In English,
Yes, the models have to be converted (tmc -> tmb) and some changes have to be done manually (tmc, tmd, tps).
I will now gradually put my models in the download area. What will happen to the others is not yet clear. I contacted the other model creators and informed them about the necessary changes.
WHAT CHANGES? I have tried to build models to make relevant electric foamies that most new fliers want. I could not get effective instructions in English, and the translation from German was too hard to be clear.
Will there be any clear instructions posted for:
1. Add a new model to RC8
2. Change a model from RC7 to RC8
3. Modify an existing model?
4. Build a new model?
Rick Collins
-
- Official Post
I have tried to build models to make relevant electric foamies that most new fliers want. I could not get effective instructions in English, and the translation from German was too hard to be clear.
Will there be any clear instructions posted for:
1. Add a new model to RC8
2. Change a model from RC7 to RC8
3. Modify an existing model?
4. Build a new model?
Rick Collins
Hi Rick,
I have some questions and some information for you.
At first, did you already build models like 'relevant electric foamies that most new fliers want' ? If so, which tool did you use?
To your questions:
1. Add a new model to RC8
Wherefrom do you get new models for the RC8?
2. Change a model from RC7 to RC8
Do you have own models for the RC7 which you would like to convert them?
If so, please send me one and I will make an example for you (with an English description what to do).
3. Modify an existing model?
For simple modifications you can use the model editor from the RC8, like in RC7.
Otherwise you must edit the <modelname>.tmd file using a text editor and make the changes.
4. Build a new model?
You need the
• General content converter ( to convert textures, sounds, and so on )
and
• 3D Modelling plugins for 3DS Max, Cinema 4D and AC3D
from the SDK Tools:
aerofly.com/community/filebase/index.php?file/2/and one of the following modeling tools:
• Autodesk 3D Studio Max 2010, 2012, 2013, 2014, 2015 or 2016
• Maxon Cinema 4D Version 17
• AC3D Version 8 ( currently for airplane modelling only )
The output must be a <modelname>.tgi file. In addition you need the texture files you used for the painting of the models.
The content converter will make a <modelname>.tmb out of the tgi file and <name>.ttx files out of the texture files.
The <modelname>.tmc and <modelname>.tmd files you should take from a similar model of the original aircraft folder of the RC8 and make the necessary adjustments manually.
Hope this will help you for the moment.
Regards,
Arthur
-
Hi Rick,
I have some questions and some information for you.
At first, did you already build models like 'relevant electric foamies that most new fliers want' ?
To your questions:
1. Add a new model to RC8
Wherefrom do you get new models for the RC8?
2. Change a model from RC7 to RC8
Do you have own models for the RC7 which you would like to convert them?
If so, please send me one and I will make an example for you (with an English description what to do).
3. Modify an existing model?
For simple modifications you can use the model editor from the RC8, like in RC7.
Otherwise you must edit the <modelname>.tmd file using a text editor and make the changes.
I have not successfully built anything in RC7.
1. no idea how to build, so I currently have nothing to add.
2. I added some models (which I found on the web - only a few worked) to RC7. I do not recall which ones I added.
3. Is there a "model editor" in RC8 on Mac? I never found it on RC7 Mac.
3a. What do the field names in the TMD file mean?
4. Gone way beyond what I am able to do by the looks of it.
<Edit>
There are a few more models, and some good progress since I was last complaining about a product I had not yet upgraded. Arthur, I applaud your effort to add models.
How could I help an effort to model some Flite Test foam board airplanes like the spitfire (I am building my second), or a foam board flying wing? (have built a few now). My mental focus is lacking due to long-term effects of serious concussions. The instructions for me to do a full build would be rather long.
</Edit>
Thanks. Best wishes on the future of this product