Hi,
The airport has just been released on Flight-Sim.org.
It's my first attempt to create an airport with AC3D - The airport-mesh:
Airport created by chrispriv, 2019 (with AC3D),
using airport-buildings from vf-air.com (reference to the original FSX-scenery http://www.vf-air.com/index.htm) --> hot stuff for simmers on FSX and P3D!
*** Freeware (only for personal and non-commercial use) ***
Enjoy! 
Christophe
Great job ! Fantastic ! Thank you 
Very nice addition. I chose to use AeroScenery to enhance the area. I used Bing and made 4 level 11 (11-14 at 1.1m) blocks and 4 level 15 (0.5m )around the airport.
Looks like a standard cultivation file is also in order for the neighborhood.
Great job Christophe,
and another guy working with AC3D
Salü Christophe,
Merci für die tolle Scenery, einer mehr in der Sammlung...
Great ! thank you so much.
BTW I started updating my LSGY Yverdon-les-Bains with our brand new large fuel station. Adding new taxiways isn't so easy in 3DSMax, lot of trial and error ahead.
Many trees have also been cut in the pattern, increasing safety.
I'll release the airport as soon as updated.
Cheers
Antoine
Well, didn’t want to raise too high expectations, I’ll be off for vacations until end of August. Initial tests with mesh grid cutting along new taxiways background in 3DSmax creates unwanted results.
I’ll have to try further until I find a successful way to doing it...
3DSmax is really not user-friendly for mesh creating...
Cheers
Antoine
Many thanks for your great feedback!
This gives me the motivation, to implement some more small or middle airports.
First steps with AC3D are very hard, making a lot of mistakes, producing a) nothing. b) large holes in the ground or c) just small holes in the ground:
Converting single-objects on a non-flat mesh with more than one texture may look like this (even making a flat airport-ground, the mesh remains not flat):
After this first "making of LSGN", I
think I got it now, more or less! 
So, I hope to do my next upload till begin of September.
First, I also will be on holiday for the next two weeks.
@Trespassers: I’m looking forward for your update of LSGY Yverdon! If it doesn’t work with 3DSMax, maybe it can be done using AC3D . Good Luck!
Regards,
Christophe
Christophe, thank you very much for your efforts and for providing this nice airport to us FS2 enthusiasts.
Regards, Jakob
Hello everybody,
An update of LSGN V1.1 is in progress. It will also include a high-density scenery of the city of Neuchatel and surroundings.
I added buildings of the town, highways and roads, car-traffic and -parking, harbours with ships and much more …
It also will work well together with the scenery of Swiss Refineries Neuchâtel-Colombier from TomSimMuc (including my airport of LSGB Bex) - refineries in sight!
I have been using for the first time ObjectGen V0.7 form lenidcamper; it's great - thx a lot!
Cultivation "Autogen Switzerland West" from drassaud has already been adapted and will also be included in my upload.
Comming soon …
Regards,
Christophe
Outstanding work. Thanks.
Ray
Great! It looks absolutly fantastic! 
*** Update V1.10 now available on fligth-sim.org ***
Scenery of Neuchâtel-town added, including additional airport-objects, buildings of town, traffic, ports, ships, powerlines, railways and add. trees etc.
It works with IPACS’s DLC for Switzerland together with the Swiss cultivation West from drassaud (--> Update available V1.04).
Also adapted to work together with Airport Bex with Neuchatel and Collombey Refineries V1.4 from TomSimMuc & chrispriv.
It is now possible to fly directly from LSGN Neuchatel along the lake and past the city to the Refineries of Colombier!
Special thanks also to TomSimMuc for his support and his piers and also to @Tomfa for editing the cultivation of Neuchâtel.
Enjoy!
Christophe
Custom buildings, marinas, towers, pylons, roads and traffic, marine vessels, etc. just add so much more to the scenery. Thanks everyone.
Christophe,
How about your team doing similar makeover for your LFLJ Courchevel airport? That might be a dazzling area for this type of treatment. You gotta love that super short runway with the 18 deg grade. Not too many buildings, but a gorgeous scenic area.
Just a thought. I was looking at the MFS 2020 images of Courchevel and got the idea that your team could probably do something similar as we wait.
Something like that ?
Is this available for beta testing?
Christophe,
How about your team doing similar makeover for your LFLJ Courchevel airport? That might be a dazzling area for this type of treatment. You gotta love that super short runway with the 18 deg grade. Not too many buildings, but a gorgeous scenic area.
In principle a good idea and it looks great the preview!
I have this on my to-do list for later. On the part of the freeware vf-air.com, where I have an authorization for implementation and publication, there are simple versions of the four French Altiports Megève, Alpe d'Huez, Meribel & Courchevel. But the creation of the Airport-grounds on AC3D will be very challenging. It would be faster, even if it's not perfect, to combine the existing runways from fscloudport with the objects of the freeware.
For the time being there are more exciting airfields in preparation, next two airfields in the easter part of Switzerland near Zurich:
- LSZN Hausen am Albis
- LSPK Hasenstrick (unfortunatly out of service since 10 years / reopening just on FS2)
LSZN Hausen am Albis
LSPK Hasenstrick
The second one is located in the hilly surroundings of Zurich on a sloping slope also with an inclination. Take-off only in one direction, landing in both directions allowed. Ever tried to land downhill?
I also started today with the realisation of LSGS Sion and work on the scenery of Zermatt. Sion and Zermatt will fit perfect together with the objects of drassaud.
Zermatt
LSGS Sion (with the "stade de tourbillon)
Regards,
Christophe
