HTC Vive Pro Beratung

  • You probably need to do a bit more research. Google and searching YouTube will give you lots of useful info. Personally I suggest you consider an Oculus Rift S. It is a lot cheaper than a Vive Pro headset and much easier to setup. Buy it from Amazon or direct from the Oculus store. Oculus support is reported to be a lot better than HTC.


    Your $'s so your choice!

    Custom built gaming desktop; Win10 pro, i9 9900k (water cooled) oc to 5ghz, zotac rtx 3090, 32 gb 3000hz ram, 1 tb ssd, 4 tb hdd, corsair gold 750w psu, Asus ROG Maximus xi hero wifi mb, StarTech 4 port/4 controller sata powered usb3.0 pcie card, Oculus Rift cv1 w/2x sensors, Vive Pro w/etsty gear VR lens mod, and Quest 1 (wireless w/VD). Asus VG248QE external 1080p 144hz gaming monitor.

  • Hi Tom,


    thanks for your reply, It's not about $, I'll sell it again, if I don't like ;)


    I already tested some VR equipment (to be honest, two Years ago) but I was very disappointed about the screen resolution. Therefore I thought I'll take the best I can get today, for a reasonable price. Actually I wanted a Pimax 8k - but only Oculos and HTC is mentionened on the aerofly page.


    Since such equipment is not supposed to be installed from computer-specialists, my hope is, that the setup is made simple. Therefore I was asking for a simple "how-to" manual, especially tailored to aerofly usage..

  • Maybe you should wait for the new HTC Comos to be released (~1-2 months?). Not as lot of details about this yet but it looks like a big improvement over the standard vive and vive pro. This may make selling older HTC models like the vive pro a bit harder to do.


    Headset resolution is not necessarily as important as you might think. VR in general is a lot lower res than a good 1080p monitor. VR at best is more like 720p at best. Also, you need a pretty good gaming PC to handle VR, especially with sims (see my PC specs in my signature).


    Actually VR usage with RC8 is very straightforward. For my Oculus rift it could not be much easier. Open the RC8 VR shortcut, wait for the start screen, put on my headset, press space bar to centre view, press start and go fly. VR Only works in 4D flying fields btw. Also, up to you to select the setting that work best for you. These VR setting are in the current RC8 manual.


    All VR systems require you to learn how to use them. None of them are simple plug and play. However, once you learn to setup and use them they are all pretty straightforward.


    VR is a lot of fun but it does have a bit of a learning curve and it is still pretty expensive. I would not recommend getting into VR if all you want it for is RC8.

    Custom built gaming desktop; Win10 pro, i9 9900k (water cooled) oc to 5ghz, zotac rtx 3090, 32 gb 3000hz ram, 1 tb ssd, 4 tb hdd, corsair gold 750w psu, Asus ROG Maximus xi hero wifi mb, StarTech 4 port/4 controller sata powered usb3.0 pcie card, Oculus Rift cv1 w/2x sensors, Vive Pro w/etsty gear VR lens mod, and Quest 1 (wireless w/VD). Asus VG248QE external 1080p 144hz gaming monitor.

  • Thank you for your explanations.

    First of all, I already use a full blown watercooled 3D machine with gtx2080 - so VR should not be an issue.

    Secondly, I plan to use VR also for my own 3D-productions. IMHO the VR resolution is the most visible drawback for my tasks. I don't like to always full zoom into, just to recognize details.

    I'll wait for HTC Cosmos esp. because it does not require external mounted sensors.

  • I've pre-ordered a Cosmos and should get it sometime next week. I'm looking forward to seeing if the higher resolution compared to my Oculus Rift CV1 makes much difference with rc8. I'll let you all know.

    Custom built gaming desktop; Win10 pro, i9 9900k (water cooled) oc to 5ghz, zotac rtx 3090, 32 gb 3000hz ram, 1 tb ssd, 4 tb hdd, corsair gold 750w psu, Asus ROG Maximus xi hero wifi mb, StarTech 4 port/4 controller sata powered usb3.0 pcie card, Oculus Rift cv1 w/2x sensors, Vive Pro w/etsty gear VR lens mod, and Quest 1 (wireless w/VD). Asus VG248QE external 1080p 144hz gaming monitor.

  • Zu beachten gibts eigentlich wenig, die Einrichtung läuft ja komplett über die Software des Anbieters und was man im Simulator machen kann findet man intuitiv schnell heraus. Das einzige was ich raten würde wäre einen waschbaren Stoffüberzug anzuschaffen für den Teil des Headsets, der die Gesichtshaut berührt, das ist deutlich angenehmer und man bekommt auch auf einem längeren Flug nicht so schnell ein oculus-face.


    Für Modellflug fällt auch das Problem weg, wie man das Yoke so befestigt, dass man alle sonstigen Sachen im VR Cockpit erreicht ohne dabei in der Realität irgenwo anzustoßen. Man kann sich da ja einfach in die Zimmermitte stellen mit dem Controller in der Hand.


    Was die Kompatibilität betrifft, AFS2 läuft (bei mir) mit Steam VR und lässt sich auch aus der Steam VR Umgebung starten. D.h. ich würde vermuten, dass wenn ein Headset grundsätzlich mit steam vr funktioniert, dass man dann auch AFS2 damit starten kann. Kann mich aber natürlich täuschen.

  • Viele meiner Kollegen sind überrascht, dass ich meine Gadgets nicht über das Internet einkaufe. Ich weiß, das klingt bizarr, aber das ist nicht meine Schuld. Ich bin schon so oft abgezockt worden, dass ich zu viel Angst habe, das noch einmal zu versuchen. Ich erinnere mich, dass mein Nachbar im Büro von einer Seite namens schwärmte - mabuspix.com htc gaming-vr und wie praktikabel sie sind. Ich wünschte, ich könnte dasselbe über andere Online-Unternehmungen sagen, die ich ausprobiert habe. Vielleicht ist der Online-Kauf nichts für mich.