Add-on scenery structure

  • Ooookey… this explains a lot…

    One addon question: What is the efficient way to find out the install place of aerofly fs 2 programmatically?

    Wish for Aerofly FS 2/4:

    - Flightpath recording on hard drive and replay in sim from different view points

    - Smoke for aerobatic planes

    - Multiplayer or at least watching other people flying sitting on ground or inside tower

  • You can find the addon folder on a Mac here:

    Macintosh HD⁩ ▸ ⁨Benutzer⁩ ▸ ⁨username ▸ ⁨Library⁩ ▸ ⁨Containers⁩ ▸ ⁨com.aerofly.aerofly-fs-2-mac⁩ ▸ ⁨Data⁩ ▸ ⁨Library⁩ ▸ ⁨Application Support⁩ ▸ ⁨Aerofly FS 2⁩ ▸ ⁨addons⁩

    Tschüss, Michael (🍎🚁)

    Configurations:

    - MacBook Pro (16", 2021); Chip: Apple M1 Max; actual macOS || Thrustmaster TCA AIRBUS EDITION: 1x Sidestick, 2x Quadrant, 2x Quadrant Add-On || Pro-Flight-Trainer PUMA X

    - iPad (12,9", 4th Generation, RAM: 6 GB); actual iOS || nimbus steelseries

  • @flightxtreme We recommend to read the registry at [HKCU\Software\IPACS\Aerofly FS 2\InstallPath]

    If you for example use the popular InnoSetup as an installation tool, you can read out the path like this:

    Code
    install_path := '';
    
    if not RegQueryStringValue(HKEY_LOCAL_MACHINE, 'Software\IPACS\Aerofly FS 2', 'InstallPath', install_path) then
    begin
      MsgBox( CustomMessage('MyProgramNotFound'), mbConfirmation, MB_OK );  
      Result := False;
      exit;
    end;
  • Thank you for the explanation, this is highly appreciated.

    Could IPACS please consider also supporting addon structure in the user-defined folder? It was acknowledged over 1 year ago as a good idea, but it is still not available.

    Sceneries quickly grow using a lot of disc space and users need to be able to choose the install location for their addons.

    I cannot imagine this could be a difficult implementation. When in doubt, it could for instance replace 'Documents/Aerofly FS 2/addons/scenery/' where nobody is likely to want installing any scenery or aircraft.

    Thanks

    Cheers

    Antoine

    Config : i7 6900K - 20MB currently set at 3.20GHz, Cooling Noctua NH-U14S, Motherboard ASUS Rampage V Extreme U3.1, RAM HyperX Savage Black Edition 16GB DDR4 3000 MHz, Graphic Card Gigabyte GeForce GTX 1080 8GB, Power supply Corsair RM Series 850W, Windows 10 64 bit.

    Edited once, last by Trespassers (September 20, 2019 at 8:13 AM).

  • Yes, thank you flightxtreme, I’ve been using this trick un other cases, it can be a workaround for AFS2, but it’s too difficult for many users to be an universal solution.

    Cheers

    Antoine

    Config : i7 6900K - 20MB currently set at 3.20GHz, Cooling Noctua NH-U14S, Motherboard ASUS Rampage V Extreme U3.1, RAM HyperX Savage Black Edition 16GB DDR4 3000 MHz, Graphic Card Gigabyte GeForce GTX 1080 8GB, Power supply Corsair RM Series 850W, Windows 10 64 bit.

  • j'ai voulu faire une organisation des répertoires plus propre ...! et notamment en déplaçant mes fichiers (qui fonctionnaient parfaitement !) vers le répertoire Addons, ce qui me semblait plus propre et plus logique.

    Plus aucun affichage, rien, RIEN et encore RIEN ... la soupe de pixels hors des zones travaillées, retour à la case "départ" !

    Je ne vois absolument pas où serait le problème sinon peut-être que AFS2 serait rébarbatif envers les sous-répertoires en cascade, peut-être trop !

    je suis revenu vers les répertoires d'origine, mais cela fait un peu fouillis et pourrait perturber le bon fonctionnement des fichiers originaux, dommage.

    Si quelqu'un a le secret ! merci à vous.

  • I use ASFS2 on a Mac. My experience is that there are clear rules in the addon directory:

    1. Level: the special folder "addon"
      .../addon/...
    2. Level: the special sub-folder "scenery"
      .../addon/scenery/...
    3. Level: parallel sub-sub-folders for countries (e.g.: de, fr, us, uk, ...)
      .../addon/scenery/country/...
    4. Level: the special sub-sub-sub folders "elevation", "images", "places"
      .../addon/scenery/country/elevation/...
      .../addon/scenery/country/images/...
      .../addon/scenery/country/places/...
    5. Level: free sub-sub-sub-sub folders for further subdivisions for individual airports, individual towns, individual regions -- for example:
      .../addon/scenery/fr/elevation/paris/maph_09_8100_a780_mask.tth
      .../addon/scenery/fr/images/paris/map_09_8100_a780/map_09_8100_a780.ttc
      .../addon/scenery/fr/places/paris/lfpb/lfpb.tsc

    Tschüss, Michael (III)

    Tschüss, Michael (🍎🚁)

    Configurations:

    - MacBook Pro (16", 2021); Chip: Apple M1 Max; actual macOS || Thrustmaster TCA AIRBUS EDITION: 1x Sidestick, 2x Quadrant, 2x Quadrant Add-On || Pro-Flight-Trainer PUMA X

    - iPad (12,9", 4th Generation, RAM: 6 GB); actual iOS || nimbus steelseries

  • Bonjour ApfelFlieger ..., et merci pour votre aide,

    à la première vue, votre organisation semble exactement similaire à la mienne! ... sauf que:

    - ... / addons / paysages / pays / ......................... moi: >>> addons / paysages / pays / régions /

    - ... / addons / paysages / fr / .............................. moi: >>> addons / paysages / fr / corse / élévation

    ........................................................................................................................................................ images

    ........................................................................................................................................................ places

    ........................................................................................................................................./ franceSudE /

    ........................................................................................................................................................ élévation

    ........................................................................................................................................................ jmages

    ........................................................................................................................................................ places

    ... et j'ai un sous-dossier "Corse" trop grand pour fragmenter les régions du pays ... AFS2 n'est probablement pas programmé pour rechercher des données comme cela.

    Je note votre aide pour prochain essai et utilisation.

    Une question: je cherche désespérément de créer un aéroport correct (hors FSCloudPort trop restreint quoique très utile!):

    - Il serait possible de parcourir tous les aéroports fournis et choisir un aéroport assez représentatif et copier / coller à une nouvelle position? il faudrait modifier les coordonnées (in un .tsc existant)? this is be be be be to be a visual aeroport, mais agréable to eyes.

    à +

    Michel

    CPU Intel Core I7 6700 K @4.00 Ghz + BiQuiet Pure Rock - CM Asusteck MAXIMUS VIII RANGER - RAM GSkill Ripjaws4 DDR4 3000 16 GB - NVidia GeForce GTX 1060 3GB - 2x SSD Samsung 500 GB 850 EVO - DD WD 2 TO.

    Edited once, last by dauphin20217 (September 24, 2019 at 10:20 AM).

  • Hi, Michel,

    I think you are missing the folder "scenery" in any case. I think you should try this (please use exactly this spelling -- and no apostrophes in the folder name):

    moi: >>> addons/scenery/fr/elevation/corse

    ..................................................images/corse

    ..................................................places/corse

    or

    moi: >>> addons/scenery/fr_corse/elevation

    .............................................................images

    ................................................. ............places

    Which airport would you like to have?


    Tschüss, Michael (III)

    Tschüss, Michael (🍎🚁)

    Configurations:

    - MacBook Pro (16", 2021); Chip: Apple M1 Max; actual macOS || Thrustmaster TCA AIRBUS EDITION: 1x Sidestick, 2x Quadrant, 2x Quadrant Add-On || Pro-Flight-Trainer PUMA X

    - iPad (12,9", 4th Generation, RAM: 6 GB); actual iOS || nimbus steelseries

  • Merci pour votre aide,

    oui, orientationuation (é) n'est pas utilisée dans mes noms de répertoires.

    Je préférerais la structure 2 qui permet de mieux séparer les lieux. J'essaierai cela. Il s'agit d'un problème de structuration de répertoires / sous-répertoires, c'est clair.

    Quels aéroports je recherche? en tout premier ceux de Corse, et Bastia en priorité! mais les suivants seraient bien venus:

    - Ajaccio, Calvi, Figari, Propriano, Solenzara ...

    J'ai téléchargé les 5 présents sur FSCloudPort mais ... c'est vaiment trop élémentaire, pas du tout réaliste.

    Sous FS2004 j'avais fais les 3 premiers depuis les photos depuis le lieu, elles étaient superbes mais le logiciel n'a pas été modifié par l'auteur lors de la diffusion de FSX, trop de différences.

    Je cherche un tutoriel très détaillé pour le remettre à l'état d'ouvrage, mais c'est décourageant, peu d'aide, des logiciels trop complexes, GMax et AC3D, chers, ... etc

    Un tutoriel était intéressant mais s'appuyait dès le départ sur "http://fr.mygeoposition.com/" aujourd'hui fermé ... stop!

    Alors, comment faites-vous des proches du réel, c'est possible, je veux exploiter les textures en provenance de FSX (j'ai ces aéroports) mais ... comment commencer? et par quoi?

    une +

    Michel

    CPU Intel Core I7 6700 K @4.00 Ghz + BiQuiet Pure Rock - CM Asusteck MAXIMUS VIII RANGER - RAM GSkill Ripjaws4 DDR4 3000 16 GB - NVidia GeForce GTX 1060 3GB - 2x SSD Samsung 500 GB 850 EVO - DD WD 2 TO.

  • Bei einigen Flugplätzen lässt sich sicher etwas machen, weil diese von TomSimMuc sind und er kein Problem damit hat, wenn da noch etwas verbessert wird -- wenn es überhaupt noch etwas zu verbessern gibt (TomSicMuc macht das generell schon sehr gut):

    -----

    At some airfields something can be done, because they are from TomSimMuc and he has no problem with it, if there is still something to be improved -- if there is anything at all to improve (TomSicMuc does this generally already very well):

    -----

    Sur certains aérodromes, quelque chose peut être fait, parce qu'ils sont de TomSimMuc et qu'il n'a aucun problème avec cela, s'il y a encore quelque chose à améliorer - s'il y a quelque chose à améliorer (TomSicMuc le fait généralement déjà très bien):

    - LFKF (Figari) (https://vau.aero/navdb/chart/LFKF.pdf)

    - LFKO (ProprianoTavaria Aerodrome)

    - LFKS (Solenzara Air Base) (https://www.sia.aviation-civile.gouv.fr/dvd/eAIP_12_SE…%20ADC%2001.pdf)

    - LFKG (Ghisonaccia Alzitone Airport)

    - LFKT (Corte Airport)


    LFKF ist soweit mal eine wenig aufgehübscht mit den Gebäuden, die FSCloudPort so hat.

    Nun fehlen erst einmal Images und Cultivations, vielleicht kann das ja jemand zuliefern?

    Wenn die Images vorhanden sind, dann kann ich auch die Flugzeuge und Gebäude noch besser positionieren.

    -----

    LFKF is so far a little bit pretty with the buildings that FSCloudPort has.

    Now images and cultivations are missing, maybe someone can deliver that?

    If the images are available, then I can position the planes and buildings even better.

    -----

    LFKF est jusqu'à présent un peu joli avec les bâtiments que possède FSCloudPort.

    Maintenant qu'il manque des images et des cultures, peut-être que quelqu'un peut nous les fournir ?

    Si les images sont disponibles, je peux encore mieux positionner les avions et les bâtiments.

    http://www.fscloudport.com/phdi/fscp.nsf/…ff?OpenDocument


    Tschüss, Michael (III)

    Tschüss, Michael (🍎🚁)

    Configurations:

    - MacBook Pro (16", 2021); Chip: Apple M1 Max; actual macOS || Thrustmaster TCA AIRBUS EDITION: 1x Sidestick, 2x Quadrant, 2x Quadrant Add-On || Pro-Flight-Trainer PUMA X

    - iPad (12,9", 4th Generation, RAM: 6 GB); actual iOS || nimbus steelseries

    Edited 2 times, last by ApfelFlieger (September 24, 2019 at 5:24 PM).

  • Dear all,

    You may try adding just a double underscore __ prefix to the folder name in order to deactivate a scenery

    In example below, SceneryA and placesB should be skipped by AFS2:

    Cheers

    Antoine

    Config : i7 6900K - 20MB currently set at 3.20GHz, Cooling Noctua NH-U14S, Motherboard ASUS Rampage V Extreme U3.1, RAM HyperX Savage Black Edition 16GB DDR4 3000 MHz, Graphic Card Gigabyte GeForce GTX 1080 8GB, Power supply Corsair RM Series 850W, Windows 10 64 bit.

    Edited once, last by Trespassers (September 25, 2019 at 1:04 PM).