Why Aerofly FS2 has extremely high FPS?

  • It uses a new and modern graphics engine while the others don't. According to some the performance is also great because AFS2 lacks quite a few features the other sims offer: while it indeed lacks quite a few options I don't think this is the (single) cause for the excellent performance. Time will tell how well AFS2 performs with ATC, AI, real weather, study level aircraft, etc.

  • The reason for the great performance is the efficient use of hardware resources, knowing the bottlenecks and cleverly avoiding them.

    It runs that fast because we programmed it on our own and didn't depend on third party libraries and we also don't have any legacy code that slows us down.

    Given the amount of content we added to the aircraft alone during the first couple of year that Aerofly FS 2 has been around (easily increased the system depth by 1000% e.g. in the a320) and the framerates still increasing throughout this time, it is safe to say that Aerofly FS 2 has a lot of headroom for new features to come. New features are not necessarily slowing things down if done correctly and as you can see by how quickly aerofly runs, we usually do invest the time to do it correctly.

    Regards,

    Jan

  • but I still cannot figure it out

    I've noticed 2 possible things that help FS2 performance:

    1) only cultivation within a ~6km radius of your aircraft is rendered

    2) the lighting/shadow engine only processes from a single point of light (sun or moon) - this is why street lights and landing lights don't illuminate the ground nearby

  • Aidez-moi s'il vous plaît!

    Soudainement, tous les aéroports de Corse (origine FSCloudPort) ne s'affichent plus, seul la piste est ok mais plus aucun bâtiment?

    J'avais ajouté un fichier .tsc avec quelques objets pylônes TV 3D / communications sur une montagne éloignée de l'aéroport de Bastia ...

    que faire? comment retrouver l'affichage de mes aéroports ?

    Merci pour votre aide.

    Michel

    CPU Intel Core I7 6700 K @4.00 Ghz + BiQuiet Pure Rock - CM Asusteck MAXIMUS VIII RANGER - RAM GSkill Ripjaws4 DDR4 3000 16 GB - NVidia GeForce GTX 1060 3GB - 2x SSD Samsung 500 GB 850 EVO - DD WD 2 TO.

    Edited 2 times, last by dauphin20217 (October 29, 2019 at 5:17 PM).

  • Aidez-moi s'il vous plaît!

    Soudainement, tous les aéroports de Corse (origine FSCloudPort) ne s'affichent plus, seul la piste est ok mais plus aucun bâtiment?

    J'avais ajouté un fichier .tsc avec quelques objets pylônes TV 3D / communications sur une montagne éloignée de l'aéroport de Bastia ...

    que faire? comment retrouver l'affichage de mes aéroports ?

    Salut Michel,

    Ne le prends pas mal, mais si tu as besoin d'aide, évite stp de poster n'importe où en hors-sujet. Je ne suis pas sûr de comprendre le rapport entre ta demande et la discussion de ce fil.

    Il vaut mieux créer un fil dédié.

    Pour essayer de répondre malgré tout à ta question, c'est vague et il y a plein de raisons possibles, à commencer par une fausse manip (cliquer-glisser par erreur un dossier ou un fichier ailleurs)...

    Si tu dis que tu n'as fait qu'ajouter un fichier tsc, eh bien la première manip à tenter pour troubleshooter est de désactiver ce tsc en ajoutant le fameux préfixe __ (double underscore) au nom.

    Soit ça rentre dans l'ordre et le conflit provient de ton fichier tsc, soit ça ne rentre pas dans l'ordre et je te conseillerais de commencer par inspecter tes répertoires à la recherche d'une fausse manip ou de fichier/dossier manquant.

    Pour la suite, comme évoqué il vaut mieux créer un fil dédié. ;)

    A+

    Antoine

    Config : i7 6900K - 20MB currently set at 3.20GHz, Cooling Noctua NH-U14S, Motherboard ASUS Rampage V Extreme U3.1, RAM HyperX Savage Black Edition 16GB DDR4 3000 MHz, Graphic Card Gigabyte GeForce GTX 1080 8GB, Power supply Corsair RM Series 850W, Windows 10 64 bit.

  • Grand merci Antoine, et désolé je n'ai pas fait trop attention, j'en prends note.

    J'ai neutralisé le fichier .tsc sans effet, puis déplacé hors du disque ce fichier, sans effet ...

    et j'ai déjà passé très longtemps à rechercher l'erreur fatale ... le glisser/déplacer sans succès mais je pense aussi que la raison est celle-ci, je suis malheureusement assez coutumier de ce genre d'erreur.

    Donc, encore merci et je retourne faire les vérifications.

    a+

    Cordialement.

    Michel.

    CPU Intel Core I7 6700 K @4.00 Ghz + BiQuiet Pure Rock - CM Asusteck MAXIMUS VIII RANGER - RAM GSkill Ripjaws4 DDR4 3000 16 GB - NVidia GeForce GTX 1060 3GB - 2x SSD Samsung 500 GB 850 EVO - DD WD 2 TO.

  • Aerofly FS 2 has a lot of headroom for new features to come. New features are not necessarily slowing things down if done correctly and as you can see by how quickly aerofly runs, we usually do invest the time to do it correctly.

    Could we possible know the IPACS's roadmap for adding those new features to AFS2?. I think it would be interesting to know the future plans for this excellent simulator and more about those new features (possibly AI & vehicle traffic, real weather, seasons, flight planning capabilities, some more aircraft systems, water textures, etc., etc., among a possible list).

    Cheers, Ed

  • Afs looks absolutely amazing. I would give up quite some fps for some nice weather engine like active sky. That gives me the most immersion: changing weather and complex clouds


    That is too bad....

    This sim could be totally awesome if they added some stuff. There has been a lot of scenery added in 3 years time (also created by enthousiasts). I bougt 2 just flight planes and those are great too. I think we have had enough scenery and planes right now and we need some other stuff to make it a bit more realistic.