Taburet Norway Mesh

  • How do I find the version number please?

    Hi Michael, in the 'bin64' folder find the Aerofly_fs_2.exe and right click on it. Then click 'properties' and look for the version number under 'details'.

    Custom built system: Jonsbo W2 ATX; ASUS ROG Strix Z390-F; Intel Core i9-9900K@4.9 GHz (NH-D14 cooled); 64GB DDR4 3200 MHz; NVIDIA GTX3080TI 12GB; StarTech 4 Port USB 3.0 PCIe; Oculus Rift S; SideWinder Force Feedback 2; Windows 10 Professional.

  • I have checked the same area on my PC - and am experiencing the same error. I have not changed anything.

    The reason must therefore be due to an update from IPACS. :!:

    EDIT: When I go out of Beta - mesh works ok on my PC.

    Hi Hartman, which release (non beta) version do you find works and doesn't give you the mesh errors?

    Custom built system: Jonsbo W2 ATX; ASUS ROG Strix Z390-F; Intel Core i9-9900K@4.9 GHz (NH-D14 cooled); 64GB DDR4 3200 MHz; NVIDIA GTX3080TI 12GB; StarTech 4 Port USB 3.0 PCIe; Oculus Rift S; SideWinder Force Feedback 2; Windows 10 Professional.

  • Thanks for your feedback Michael.

    A quick update from my side. I decided to apply the latest revision - v2050323 and this does in fact cure the mesh issues at around 60 degrees latitude. Unfortunately with this update I am unable to run Vulkan near a number of UK airports as it just results in a CTD. However running with OpenGL seems to be reasonably stable.

    Custom built system: Jonsbo W2 ATX; ASUS ROG Strix Z390-F; Intel Core i9-9900K@4.9 GHz (NH-D14 cooled); 64GB DDR4 3200 MHz; NVIDIA GTX3080TI 12GB; StarTech 4 Port USB 3.0 PCIe; Oculus Rift S; SideWinder Force Feedback 2; Windows 10 Professional.

  • Thanks for your feedback Michael.

    A quick update from my side. I decided to apply the latest revision - v2050323 and this does in fact cure the mesh issues at around 60 degrees latitude. Unfortunately with this update I am unable to run Vulkan near a number of UK airports as it just results in a CTD. However running with OpenGL seems to be reasonably stable.

    I may try the update based on your findings, thanks for your help.

    PS Updated working OK.

    Best wishes, Michael :)

    Edited once, last by IZ0JUB (January 19, 2021 at 12:15 PM).

  • A new check a little further north - shows that an error has still occurred. This time I went higher over the terrain - and then it is easy to register the error.

    N 61.3871 E 11.0212, 15000ft.

    Steam: v2.05.03.23 (20201222) OpenGL and Vulkan (non beta).

    Thanks for your update Hartman, I will check and verify whether I see the same later.

    Edit: After checking with v2.05.03.23 (DVD installation), in the area of N 61.3871 E 11.0212, @15000ft. the mesh seems to be displaying correctly for me. I don't see any wide flat valleys in this area anymore.

    However at N 68.7507 E 24.1368, @20,000ft. flying east I see more mesh errors (see images below).

    In addition I see a 30,000 foot column extending from Bardufoss BDU/ENDU??

  • Thanks for your update Hartman, I will check and verify whether I see the same later.

    Edit: After checking with v2.05.03.23 (DVD installation), in the area of N 61.3871 E 11.0212, @15000ft. the mesh seems to be displaying correctly for me. I don't see any wide flat valleys in this area anymore.

    However at N 68.7507 E 24.1368, @20,000ft. flying east I see more mesh errors (see images below).

    In addition I see a 30,000 foot column extending from Bardufoss BDU/ENDU??

    I don't see that on mine, however I'm only looking at default scenery. Have I missed out on any recent good quality photo scenery?

    Best wishes, Michael :)

    Edited once, last by IZ0JUB (January 20, 2021 at 8:59 AM).

  • Tower at N 68.6737 and E 17.4345 Scenery courtesy of Hartman near Evenes.

    Thanks Michael, as well as the tower you have captured I can make out a typical large flat valley mesh error in the background :)

    Custom built system: Jonsbo W2 ATX; ASUS ROG Strix Z390-F; Intel Core i9-9900K@4.9 GHz (NH-D14 cooled); 64GB DDR4 3200 MHz; NVIDIA GTX3080TI 12GB; StarTech 4 Port USB 3.0 PCIe; Oculus Rift S; SideWinder Force Feedback 2; Windows 10 Professional.

  • Elevation folder removed and tower still appears?

    ENNK Airport

    Fixed this problem. In the original download courtesy of Hartman I found a folder in places/Lofoten/Airports. The contents of the Airport folder I moved to places/airports/EN_B, ENAN etc . This works OK with no strange towers at any of the airports. However the elevation problem is still there.

    Best wishes, Michael :)

    Edited 4 times, last by IZ0JUB (January 20, 2021 at 3:36 PM).

  • I tried "Augustin Winther" North, Mid and South 10 M Mesh in various installation folders but no fix to this elevation problem.

    Thanks again for checking Michael, your findings mirror mine. I does seem that presently the latest revision of FS 2 struggles with displaying either mesh correctly the further north you go.

    Custom built system: Jonsbo W2 ATX; ASUS ROG Strix Z390-F; Intel Core i9-9900K@4.9 GHz (NH-D14 cooled); 64GB DDR4 3200 MHz; NVIDIA GTX3080TI 12GB; StarTech 4 Port USB 3.0 PCIe; Oculus Rift S; SideWinder Force Feedback 2; Windows 10 Professional.