USA South Florida Problem

  • I have really been enjoying Aerofly, especially these last few days with free time. No problems until I noticed some floating runways, trees etc on KEWY and KMTH. Not sure what has happened since all is well on my laptop but not the PC. Checked to make sure the demo key west was no longer installed. Also did a steam verify on files. Would appreciate any help on what may be the problem. Wold like to try uninstall but not sure how to do this on Steam.

    Regards,

    Carl


    Laptop I7-7700HQ - 2.8/3.6hz, Nvida GeForce GTX 1050 4g, 16gb mem, 256 GB + 2.5TB HD, Win10

  • Hi Ken,

    Yes but no change. Everything is in place but there are deep valleys below the runways. It appears the whole airport will be floating once you start a take-off with deep valleys below the rwy. I am not an expert on troubleshooting Aerofly but would be curious if delete KEWY and Marathon, whcih are the only two that are showing the floating. Then transfer the two from my laptop. Just curious.

    Regards,

    Carl


    Laptop I7-7700HQ - 2.8/3.6hz, Nvida GeForce GTX 1050 4g, 16gb mem, 256 GB + 2.5TB HD, Win10

  • Still unable to figure out what is causing those two airports to have the floating when the rest of the software works with no floating problems. Could it be an elevation problem that is corrupted. Appreciate any possible hints to try. I have replaced the two airports with the same one from my laptop but no change. Help if possible,

    Thanks

    Regards,

    Carl


    Laptop I7-7700HQ - 2.8/3.6hz, Nvida GeForce GTX 1050 4g, 16gb mem, 256 GB + 2.5TB HD, Win10

  • I think you can right-click on the Aerofly link in Steam and select uninstall and it will remove it from your PC's hard drive but it will still be in your Steam account available for download again.

  • Will that just uninstall the South Florida Package? I looked to see if I could do that but when I click the aerofly line it appears to give me the feeling it was going to uninstall aeroFly. I sure don't want to do that. By the way when I start up aeroFly I do see using beta package.

    Thanks again for hour help. Will check it out again. Also could I reinstall the beta package?

    Regards,

    Carl


    Laptop I7-7700HQ - 2.8/3.6hz, Nvida GeForce GTX 1050 4g, 16gb mem, 256 GB + 2.5TB HD, Win10

  • I think you can right-click on the Aerofly link in Steam and select uninstall and it will remove it from your PC's hard drive but it will still be in your Steam account available for download again.

    Hola Kenventions


    Based on this reasoning of yours, could I erase FS 2 from my hard drive and download it again from Steam on another brand new CPU? . This is because I have to buy a more powerful PC than the current one. Is that possible ?.


    Kind regards: Delfin

  • I do have a package South Florida TLv2 installed under documents/aerofly. This is also installed on my laptop as well. The problem is with my desktop. Was wondering if "elevations" and maybe "Xrerf", which is located in my aeroflyflightsimulator (not documents)/scenery. Transfer same files from my laptop to PC. (would back up everything in my PC that is under "scenery". Hope that makes some sense.

    As you can tell I am at a lost and not that knowledgeable with Aerofly. ;(

    I did notice that my pc does not have the EC135. It is on my laptop. Went to steam and assumed I had the latest beta but maybe not for the PC. To download steam is requesting code. I need a code?

    Regards,

    Carl


    Laptop I7-7700HQ - 2.8/3.6hz, Nvida GeForce GTX 1050 4g, 16gb mem, 256 GB + 2.5TB HD, Win10

    Edited once, last by ctiger ().

  • Based on this reasoning of yours, could I erase FS 2 from my hard drive and download it again from Steam on another brand new CPU? . This is because I have to buy a more powerful PC than the current one. Is that possible ?

    Steam allows you to install FS2 on 2 different PCs under the same account but you can only play one or the other - not both at the same time.

  • Steam allows you to install FS2 on 2 different PCs under the same account but you can only play one or the other - not both at the same time.

    Yes, no issue...I perform it often. Or I use my PC or I use my Laptop via Steam installed on both but of coarse with same accoount-inlog.

    Both Steam-install's are updated automatically to be syncrone from startup of one or the other. So, never both at the same time opening 'steam' !

    Real name: Johnny

    PC-Specs: i7-3930K - 32GB RAM - GTX1070ti 8GB - 2TB SSD + 1TB SSD + 2x3TB HDD

    Laptop Specs: i7-9750H - 32GB RAM - RTX2070 max-Q 8GB - 2x 1TB NVMe SSD + 2TB SSD

  • Thanks for all your comments, still haven't figured out the problem. On each of these airports it is like everything is 3D with all the floating of RWY, Tree, bldgs. This is only at the airports. Since this is elevation what about the TSC file in each of the airports KEWY and KMTH?

    Regards,

    Carl


    Laptop I7-7700HQ - 2.8/3.6hz, Nvida GeForce GTX 1050 4g, 16gb mem, 256 GB + 2.5TB HD, Win10

  • This is what I get "Ture"



    <[file][][]

    <[tmsimulator_scenery_place][][]

    <[string8][type][airport]>

    <[string8][sname][Key West Intl]>

    <[string8][lname][Key West Intl]>

    <[string8][icao][KEYW]>

    <[string8][country][]>

    <[string8][coordinate_system][lonlat]>

    <[vector2_float64][position][-81.76677118 24.55602632]>

    <[float64][height][0.9144]>

    <[float64][size][5000]>

    <[vector2_float64][tower_position][-81.7564450870536 24.5537360684529]>

    <[float64][tower_height][23.17001817]>

    <[bool][autoheight][true]>

    <[string8][autoheight_method][]>

    <[list_tmsimulator_scenery_object][objects][]

    <[tmsimulator_scenery_object][element][0]

    <[string8][type][ground]>

    <[string8][geometry][keyw_key_west_intl_rwy]>

    <[vector3_float64][position][-81.760022 24.554775 0]>

    <[float64][orientation][0]>

    <[int32][autoheight_override][-1]>

    >

    Regards,

    Carl


    Laptop I7-7700HQ - 2.8/3.6hz, Nvida GeForce GTX 1050 4g, 16gb mem, 256 GB + 2.5TB HD, Win10

  • Ken, this is complete TSC for KMTH-Marathon (has same problem) Hope this would help.


    <[file][][]

    <[tmsimulator_scenery_place][][]

    <[string8][type][airport]>

    <[string8][sname][Marathon Intl]>

    <[string8][lname][Marathon Intl]>

    <[string8][icao][KMTH]>

    <[string8][country][]>

    <[string8][coordinate_system][lonlat]>

    <[vector2_float64][position][-81.05834389 24.72354691]>

    <[float64][height][1.524]>

    <[float64][size][5000]>

    <[vector2_float64][tower_position][-81.0506173569646 24.7253256722816]>

    <[float64][tower_height][13.29001058]>

    <[bool][autoheight][true]>

    <[string8][autoheight_method][]>

    <[list_tmsimulator_scenery_object][objects][]

    <[tmsimulator_scenery_object][element][0]

    <[string8][type][ground]>

    <[string8][geometry][kmth_marathon_rwy]>

    <[vector3_float64][position][-81.051478 24.726272 0]>

    <[float64][orientation][0]>

    <[int32][autoheight_override][-1]>

    >

    <[tmsimulator_scenery_object][element][1]

    <[string8][type][decal]>

    <[string8][geometry][kmth_marathon_decal]>

    <[vector3_float64][position][-81.051478 24.726272 0]>

    <[float64][orientation][0]>

    <[int32][autoheight_override][-1]>

    >

    <[tmsimulator_scenery_object][element][2]

    <[string8][type][object]>

    <[string8][geometry][kmth_marathon_obj]>

    <[vector3_float64][position][-81.051478 24.726272 0]>

    <[float64][orientation][0]>

    <[int32][autoheight_override][-1]>

    >

    >

    <[list_tmsimulator_scenery_object_animated][objects_animated][]

    >

    <[list_tmsimulator_runway][runways][]

    <[tmsimulator_runway][element][0]

    <[vector2_float64][endpoint1][-81.0594900282562 24.7231124238896]>

    <[vector2_float64][endpoint2][-81.0433073377155 24.7292469883089]>

    <[vector2_float64][threshold1][-81.058343894038 24.7235469125323]>

    <[vector2_float64][threshold2][-81.0444498918375 24.7288138766919]>

    <[float64][width][30]>

    <[string8][name1][07]>

    <[string8][name2][25]>

    <[string8][appltsys1][std]>

    <[string8][appltsys2][std]>

    <[string8][papi1][left]>

    <[string8][papi2][left]>

    <[bool][papi1_has_custom_position][false]>

    <[bool][papi2_has_custom_position][false]>

    <[vector2_float64][papi1_custom_position][0 0]>

    <[vector2_float64][papi2_custom_position][0 0]>

    <[float64][papi1_glide_slope][3]>

    <[float64][papi2_glide_slope][3]>

    <[float64][papi1_spacing][6]>

    <[float64][papi2_spacing][6]>

    <[string8][reil1][none]>

    <[string8][reil2][none]>

    >>

    <[list_tmsimulator_helipad][helipads][]

    >

    <[list_tmsimulator_startposition][start_positions][]

    >

    <[list_tmsimulator_parking_position][parking_positions][]

    <[tmsimulator_parking_position][element][0]

    <[vector2_float64][position][-81.0540029879656 24.7239713405019]>

    <[float64][heading][67.2]>

    <[float64][size][40]>

    <[string8][name][Parking Position #1]>

    >

    <[tmsimulator_parking_position][element][1]

    <[vector2_float64][position][-81.0435607357912 24.7280490788181]>

    <[float64][heading][338.4]>

    <[float64][size][40]>

    <[string8][name][Parking Position #2]>

    >

    >

    <[list_tmsimulator_view_position][view_positions][]

    >

    <[list_tmsimulator_scenery_cultivation][cultivation_files][]

    <[tmsimulator_scenery_cultivation][element][0]

    <[string8][filename][cultivation]>

    <[string8][building_textures_folder][]>

    <[bool][auto_height][true]>

    <[bool][use_height_offset][false]>

    >

    Regards,

    Carl


    Laptop I7-7700HQ - 2.8/3.6hz, Nvida GeForce GTX 1050 4g, 16gb mem, 256 GB + 2.5TB HD, Win10