CAN ANYBODY HELP ME?

delfinpm · October 12, 2020 at 7:18 PM

Today I found that Aerofly FS 2 does not load the aircraft: Cessna 152, the 2 Tecnan P2008 and a good part of the Krzysztof aircraft.

I have already deleted the "main-mcf" file, but it still doesn't load the mentioned planes.

I think it loads all the facts by IPACS (I haven't tried all of them).

Secondly, how can I retrieve (on the monitor screen) the arrow that when pressed instantly raises I think it is 600 feet, the planes in flight ?. I had it set up like this, but when deleting the main-mcf file, these icons on the screen have also been deleted.

Regards: Delfin

Jet-Pack (IPACS) · October 12, 2020 at 7:29 PM Official Post

What does the tm.log file say?

delfinpm · October 12, 2020 at 8:03 PM

I don't know Jan. How do you copy in the Forum?

Jet-Pack (IPACS) · October 12, 2020 at 8:39 PM Official Post

You can either use the code section and copy paste the content

or upload the file inside a .zip or as a .txt

delfinpm · October 12, 2020 at 11:33 PM

tm.log tm.log tm.log

delfinpm · October 13, 2020 at 12:14 AM

Hola Jan

I have discovered another procedure, it is copied.

Manipulating with the archives and the Zip, I have the doubt if I have unintentionally copied a file in the Aerofly FS 2 file list. I mean the file "tm.7z" (above "tm.log").

Enclosed I am sending you a copy of the screen with the FS 2 files. Tell me if this file should be deleted.

Thank you very much for your effort.

Kind regards: Delfin

Jet-Pack (IPACS) · October 13, 2020 at 10:41 AM Official Post

It looks like the tomahawk has a syntax error.

Code

 235.81-tmmodelmanager:              loading dynamics begin 'tomahawk'...
      235.82-tmfile_properties:       WARNING:  property '' is not a member of type 'output_free'.
      235.82-tmfile_properties:       WARNING:  property 'PitotTube' is not a member of type 'modelmanager'  hash=8154747571310076609.
      235.82-tmfile_properties:       WARNING:  property 'SenderBody' is not a member of type 'modelmanager'  hash=10147580742910240000.
      235.82-tmfile_properties:       WARNING:  property 'SenderMach' is not a member of type 'modelmanager'  hash=11406255881190364135.

Please inform the author of the model about this.

I think it probably has something like

Code

<[output][SomeOutput][][]

instead of

Code

<[output][SomeOutput][]

With one too many [] at the end.

stratospheric · October 13, 2020 at 12:28 PM

It's amazing how a [] can really ferk up yer day ! Curiously Krzysztof's Tomahawk works fine for me although it may have one of many to which I copied & pasted the c172 option.tmc

Jet-Pack (IPACS) · October 13, 2020 at 12:49 PM Official Post

Ah that could be another reason...

delfinpm · October 13, 2020 at 12:59 PM

Quote from stratospheric

It's amazing how a [] can really ferk up yer day ! Curiously Krzysztof's Tomahawk works fine for me although it may have one of many to which I copied & pasted the c172 option.tmc

Of course, that's the programming. But, it is not only the Tomahawk, they are also (among others) these:

Rutan Long-EZ,

XtremeAir Sbach 300

Sherwoo Ranger XP, and the Tecnan P20008

Etc.

Jan: I have already communicated your message to Krzysztof. I hope I can solve this difficulty. Thanks for your attention and effort

Regards: Delfin

delfinpm · October 13, 2020 at 1:38 PM

Again with you, Jan:

You have not answered these one question, (in Post # 8), please, I await your answer:

Manipulating with the archives and the Zip, I have the doubt if I have unintentionally copied a file in the Aerofly FS 2 file list. I mean the file "tm.7z" (above "tm.log"). (Post #

Regards: Delfin

Jet-Pack (IPACS) · October 13, 2020 at 6:41 PM Official Post

delete the debug.log and tm.7z files

stratospheric · October 13, 2020 at 9:29 PM

Quote from delfinpm

Of course, that's the programming. But, it is not only the Tomahawk, they are also (among others) these:
Rutan Long-EZ,
XtremeAir Sbach 300
Sherwoo Ranger XP, and the Tecnan P20008
Etc.
Jan: I have already communicated your message to Krzysztof. I hope I can solve this difficulty. Thanks for your attention and effort
Regards: Delfin

Display More

Yeah none of them worked for me. Then I copied & pasted c172 option.tmc into all of them and they all work.

delfinpm · October 13, 2020 at 9:44 PM

From where you have copied and where you have pasted this file: "c172 option.tmc".

You have said in all of them; I really don't understand that. Can you explain it more fully? Now all the planes that I have listed work for you?

Regards: Delfin

stratospheric · October 13, 2020 at 11:50 PM

Quote from delfinpm

From where you have copied and where you have pasted this file: "c172 option.tmc".
You have said in all of them; I really don't understand that. Can you explain it more fully? Now all the planes that I have listed work for you?
Regards: Delfin

Copy it from:

/Users/Delfin/Library/Application Support/Steam/steamapps/common/Aerofly FS 2 Flight Simulator/aircraft/c172/option.tmc

and paste it into each aircraft folder which isn't working for you.

I downloaded most of the aircraft & all crashed back to the default c172. After copying & pasting as above, they all worked fine.

delfinpm · October 14, 2020 at 12:01 PM

Hola Stratospheric

1º) .- How has it occurred to you, or how did you deduce that the Cesnna 172 file could solve this problem on another plane that does not belong to IPACS?

2nd) .- I copied and pasted the file: "c172 -> 172.tmc" in the plans: Tomahowk, Rutan Lon-EZ, Sbach 300 and Tecnan P2008 and none of them works.

I am enclosing a copy of the screen for your verification.

Kind regards: Delfin

Jet-Pack (IPACS) · October 14, 2020 at 3:59 PM Official Post

Copy the "option.tmc" not "c172.tmc"

stratospheric · October 14, 2020 at 4:02 PM

Hi Delfin, copy option.tmc from the c172 folder and paste it into the Tomahawk, Rutan Long-EZ, Sbach 300 and Tecnan P2008 folders. Not sure it'll work but if they currently crash to the Cessna C172, then I think there's a good chance they'll work after you paste the file into the folders.

delfinpm · October 14, 2020 at 5:28 PM

Since it did not work according to the copied files, I made the decision to delete the Krzysztof aircraft folders, and re-download them from "GitHub, repositiries" and they work correctly, all except one: "Sbach 300" which has disappeared from repositories, therefore I could not download it, but the initial version continues in its folder. I have copied the file " option.tmc "at the end, but it doesn't work either.

In the previous message, it was not well described (the syntax used, created confusion for me already seen).

Jan, with his message, super brief, gave me the key. That's the correct syntax: { Copy the "option.tmc" not "c172.tmc"} and just like he says,I have copied from the folder "c172" the file "option.tmc" to the folders of the planes:

Sbach 300, Tecnan P2008, P2008 and Cesnna 152, and none work.

For your repeated efforts, thank you Jan and, thank you Stratospheric

Kind regards : Delfin