• AiRRbus333> December 12, 2021 at 3:22 PM

    Changed the title of the thread from “Cold and Dark start” to “Cold and Dark”.
  • When you look at the throttle lever of the MB339 there is a text cut off. Click on that rear part of the throttle lever to set it to the cut off position.

    Ju52: Make sure that mixture levers are forward (the ones below throttle) and that ignition is set on. The ignition is the large lever in the center of all magneto switches. That button/lever has to be pushed down to enable ignition. Then pull the starter lever of the engine you want to start and it should fire up.

    Regards,

    Jan

  • When you look at the throttle lever of the MB339 there is a text cut off. Click on that rear part of the throttle lever to set it to the cut off position.

    Ju52: Make sure that mixture levers are forward (the ones below throttle) and that ignition is set on. The ignition is the large lever in the center of all magneto switches. That button/lever has to be pushed down to enable ignition. Then pull the starter lever of the engine you want to start and it should fire up.

    Wow thank you:)

    Iphone 15 Pro: Aerofly Fs Global

    Rtx 4070 Ryzen 7 7745HX: Aerofly Fs 4, Msfs 2020, Dcs