Aerofly FS 4 SDK - Now Available

Jet-Pack (IPACS) · July 8, 2022 at 5:27 PM

We have published the Aircraft Converter and the DR400 example aircraft for Aerofly FS 4:

Aircraft SDK | Aerofly FS Scenery SDK | Aerofly FS SDK Export Plugins | Aerofly FS

On that page I also described the steps how to get an existing Aerofly FS 2 repaint to work in Aerofly FS 4 as well as an existing aircraft.

Limited time offer for aircraft developers...

If you are the creator of an aircraft that is working in the latest Aerofly FS 2 version that you would like to see in Aerofly FS 4, I have a tool that I can use to programmatically convert the aircraft TMC and TMD files from Aerofly FS 2 format to the new Aerofly FS 4 format. You can also submit multiple aircraft then I can process them relatively quickly.

What you would need to do:

Converted your intermediate aircraft files (BMP or PNGs as well as TGI, WAV, etc.) using our Aerofly FS 4 Aircraft Converter (except previews)
Pack these converted files and your TGI file into a ZIP or RAR archive (multiple folders for multiple aircraft in the same zip works as well)
Write a comment below and I'll contact you via private message. If we already had a private conversation in the forum or e-mail you can get in touch that way as well, no need to comment below.

Then I'll use my tools to convert the TMD and TMC files and will try to fix all tm.log errors for you.

After that there is still some work left for you:

Update TMC
Add or update cold & dark and before start presets
Update copilot.tmc
Add the _flaps.tmd and _gear.tmd (if your plane has flaps or gear)
Convert everything again to render the previews
Upload the aircraft for everyone

krzysk · July 9, 2022 at 5:50 PM

I can see in the DR400 example that blender format is used.
Is it available any plugin for blender to export TGI files?

Tomfa · July 9, 2022 at 10:42 PM

Quote from Jet-Pack (IPACS)

Limited time offer for aircraft developers...

Have you already made the necessary arrangements with Just Flight?

admin · July 9, 2022 at 10:45 PM Official Post

@krzysk: Yes we do support Blender now. We will include this exporter in the tool real soon.

Jet-Pack (IPACS) · July 15, 2022 at 5:01 PM Official Post

We have published the Aerofly FS 4 Content Converter as well as a two example points of interest (POI) scenery objects.

Scenery SDK

You can now create your custom 3D scenery objects for Aerofly FS 4:

Scenery SDK | Aerofly FS

Blender Export Plugin

We've also create an export plugin for Blender,

and you can now use Blender for modeling Aerofly FS 4

aircraft and scenery objects.

SDK Export Plugins | Aerofly FS

Paradoxagi · July 15, 2022 at 5:39 PM

There is no new Geoconvert tool included? Or is this now part of the content converter?

ZoSoChile · July 15, 2022 at 5:51 PM

Can't wait to try it out. Thanks IPACS! Here's to hoping for smooth conversion processes.

ZoSoChile · July 16, 2022 at 12:57 AM

I was able to successfully convert airport runway etc.

Two issues so far:

1. My airport name does not show up on map.

2. No Orientation option in AFS4 TSC

<[float64][orientation][270]> does not work.

I noticed the TSC formatting structure is a bit different after running AFS4 Content Converter.
Is there an airport TSC example we can use? Currently SDK only shows Object example.

This is using AC3D with TGI Plugins from AFS2 SDK. Perhaps this is also part of the issue?

Jet-Pack (IPACS) · July 16, 2022 at 8:09 AM Official Post

The current SDK is for objects only.

admin · July 16, 2022 at 9:37 AM Official Post

ZoSoChile: To create airports, we will provide a separate tool soon. With FS 4 one can now create airports in a more parametric way, e.g. it's not required ( but still possible ) to hand model the airport ground mesh. Rather one specifies shapes and lines with different attributes to create a ground mesh.
The 'orientation' parameter in the tsc is no longer supported, you have to rotate the mesh in your 3D modelling software.

The TGI export plugins of FS 2 still work.

juan37 · July 16, 2022 at 4:40 PM

Quote from Jet-Pack (IPACS)

El SDK actual es solo para objetos.

Good morning jet-pack, I would like to know if there will be an upcoming tool to convert the scenerios that we have achieved to those of third parties, that is, the cultivation that we have done in cities that do not have osm data???

MartinM · July 17, 2022 at 11:49 AM

I have several objects for LSMP and LSME that could be converted to AF4. Approach me if anyone interested.

MDIvey · July 18, 2022 at 1:34 PM

I use AC3D to create my aircraft. One of the reasons I went down that route rather than blender was that plugins were available for AFS and XP11. Does the fact that you have provided a plugin for Blender above mean that you've dropped support for AC3D? or have you just not got round to doing it yet? I'm using the 64bit version of AC3D now (I mean why wouldn't you if you have a 64 bit operating system and 32 bit no longer seems to be an option anyway) so will that be catered for?

Matt

admin · July 18, 2022 at 2:03 PM Official Post

@MDIvey: You can still use the AC3D Export plugin as usual. We just haven't offered it yet for download on our website.

MDIvey · July 18, 2022 at 2:20 PM

Does it work with the 64 bit version of AC3D? If so any chance that I could have it soon, as I've been doing some work on my Spitfire and Buffalo (with some assistance from Jan) and at the moment I haven't had to make any changes to the TGI file, but that may soon change.

On another subject.... I'd like to offer this as a suggestion for down the road for a plugin.... one that allows the user to adjust the position of your pilot figures, and corrects the the related bone entries so we can trial and error your pilots into our models. I'll probably end up using a Static pilot figure in my models if I can source some free ones. Its a lot of work to build pilot figures (especially for freeware) even if you're any good at it and I'll be honest I'm not... and you're ones are very good... you're P38 or F4U pilot would look pretty good in my aircraft. I do hate seeing an empty office in the external view

Matt

admin · July 18, 2022 at 4:43 PM Official Post

Matt, again, the old FS 2 AC3D plugins just work fine and we have supported 64 Bit AC3D for a long time. Again, we will publish the plugins again soon. Attached is a version for AC3D Version 9 for you to try, in case you want to use the latest AC3D version.

MDIvey · July 18, 2022 at 5:28 PM

thanks very much. I may download version 9. The version I have installed at the moment is 8.6.11 so it appears I'm a little behind. Could you post or link to the version of the plugin for my current version... I think I'm still covered by free updates, but not sure and don't want to have to get a paid update just yet. I'm just going to go and check my status.

Matt

MDIvey · July 18, 2022 at 6:06 PM

ok upgraded to 9.0.22... so far so good

Matt

MDIvey · July 18, 2022 at 9:57 PM

A few problems exporting a new TGI. The exporter report says the geometries are missing and unreferenced although I have not changed any of the object names or TMD entries & the tm_AC3D file didn't list any problems with objects or materials... not sure what's wrong here.

export_reports.zip

MDIvey · July 19, 2022 at 5:09 PM

Seems the new plugin is fussy about capital letters being used in object names whereas previous versions I've used where not. I had to go in and change all the object names so that for example, LeftWing has become leftwing now. It was that in the TMD anyway but previously it had not mattered.

Matt

Aerofly FS 4 SDK - Now Available

Limited time offer for aircraft developers...

Limited time offer for aircraft developers...

Jet-Pack (IPACS) July 15, 2022 at 4:59 PM

Scenery SDK

Blender Export Plugin

Tags