Danke Dir wie verrückt. Funktioniert alles super.
Geht das analog auch so für AEROSOFT_LUKLA?

Gruß Hans-Peter

Da ich mir Lukla nicht gekauft habe, kann ich es nicht sagen — aber ich würde es einfach mal probieren, es kann ja nichts kaputt gehen.

Heute Nachmittag werde ich wahrscheinlich auch mal die anderen ORBX-Produkte testen, die ich noch habe.

Generell hat IPACS ja selber schon viel gemacht. Wenn ich mir LOWI (insbruck) so ansehe, ist für mich die IPACS-Version schon gut und die ORBX dann der Tupfer zum sehr gut.

—————

Since I didn't buy Lukla, I can't say - but I would just give it a try, nothing can break.

This afternoon I'll probably try the other ORBX products I still have.

In general, IPACS has already done a lot itself. When I look at LOWI (insbruck), I think the IPACS version is already good and the ORBX is just the finishing touch.

Die ORBX Freeware LSGK Saanen (https://orbxdirect.com/product/lsgk/afs2) funktioniert ebenfalls -- einschließlich der animierten Person, die beim Helipad fegt. 🧹🚁

----------

The ORBX freeware LSGK Saanen (https://orbxdirect.com/product/lsgk/afs2) also works -- including the animated person sweeping at the helipad. 🧹🚁

Ich hab's mal auf dem gleichen Weg mit Lukla probiert und es prinzipiell so hinbekommen. Allerdings ist die ganze Szenerie etwas verdreht und verschoben.

Dabei ist mir aufgefallen, dass sich die Positionsdaten in der .tsc-Datei nicht wirklich auswirken. Ich habe auch bei ORBX-LOWI versucht, die Startposition auf der der Flieger steht und mit dem vorhandenen kollidiert, in der lowi.tsc und lowi.wad (<[list_tmsimulator_parking_position][parking_positions][]-Struktur) zu verschieben. Hat leider auch keinen Einfluss gehabt. Hast Du das irgendwie hin bekommen?

Was macht eigentlich die .wad-Datei? Bei Lukla kann man sie scheinbar auch weglassen.

Vielen Dank Hans-Peter

Die in LOWI gezeigte Parkposition kommt vom FS4 aus einer der beiden Dateien

- /Users/username/Library/Application Support/Steam/steamapps/common/Aerofly FS 4 Flight Simulator/scenery/airports/at/lowi/lowi.tsc

oder

- /Users/username/Library/Application Support/Steam/steamapps/common/Aerofly FS 4 Flight Simulator/scenery/airports/at/lowi/lowi.wad.

An den beiden Dateien als Original-Dateien würde ich nichts ändern -- zumal ich auch nicht weiß, wie das geht (mein Text-Editor auf dem Mac zeigt den Inhalt nur kryptisch).

Bei ORBX steht die B737 der Transavia Air auf der FS4-Parkposition. Ich habe die Datei westsim_lowi_statics_b737_transavia.ttx mal blockiert - aber dann verschwinden mehr Objekte als nur der Flieger (nur der arme Einweiser winkt fröhlich vor sich hin).

Was die wad-Datei macht, weiß ich nicht. Ich habe nur gesehen, dass das Fehlen dieser Datei bei Flugplätzen zu einem Eintrag in der ERROR-Liste führt.

--------------------

The parking position shown in LOWI comes from FS4 from one of the two files

- /Users/username/Library/Application Support/Steam/steamapps/common/Aerofly FS 4 Flight Simulator/scenery/airports/at/lowi/lowi.tsc

or

- /Users/username/Library/Application Support/Steam/steamapps/common/Aerofly FS 4 Flight Simulator/scenery/airports/at/lowi/lowi.wad.

I wouldn't change anything in the two files as original files -- especially since I don't know how to do that either (my text editor on the Mac only shows the content cryptically).

At ORBX, the Transavia Air B737 is at the FS4 parking position. I blocked the file westsim_lowi_statics_b737_transavia.ttx once - but then more objects than just the plane disappear (only the poor usher is waving happily in front of him).

What the wad file does, I don't know. I have only seen that the absence of this file at airfields leads to an entry in the ERROR list.

Thanks Michael for all the tips, all work normally except Chicago meigs, I tried everything but impossible to animate these buildings, certainly something incompatible with the .toc file, or something else?

Quote from gotte612

Danke Dir wie verrückt. Funktioniert alles super.
Geht das analog auch so für AEROSOFT_LUKLA?

Gruß Hans-Peter

Now concerning Lukla, nothing can be fixed without the author Sascha Normann helping, I have already tried everything, because what is definitely broken, is the elevation and the orientation of the areas, which causes in my opinion a shift of the positions of all the aerodromes including those of the Helipads and whether with the .wad file or without.

Quote from EXTRA300L

Ich würde mir Wünschen ,das ORBX zurück kommt

Man kann nur hoffen das Sie das lesen

Einen schönen Samstag euch allen.

Enrico

I could be wrong, but don't be envious for nothing, ORBX will not come back, already they no longer answer on their forums.

Quote from EXTRA300L

Ich glaube auch, aber die Hoffnung stirbt zuletzt!!!!!!!!!!

Grüße

Enrico

You should ask this question rather to IPACS, but I believe that they had already answered this question on another thread.

To my knowledge, all the authors have already left for MSFS and Xplane. I had proof of this concerning the authors of JustFlight or at least most of it.

I think if we had the SDKs we are waiting for, the community would shape things again.

Danke Michael und Pascal,

in der Original-LOWI.TSC kann ich auch nichts ändern (auch nur kryptische Zeichen).

Danke für Eure Hilfe.

Ich habe noch ein anderes Problem, in VR ist der bei ASF4 kein Sound da, in ASF2 in alles i.O. Ist das noch ein Bug?

VR-Soundproblem hat sich gelöst (Steam-VR hatte 'ne Macke)

Hans-Peter

Quote from Tomfa

Thanks Michael for all the tips, all work normally except Chicago meigs, I tried everything but impossible to animate these buildings, certainly something incompatible with the .toc file, or something else?

KCGX (Chicago Meigs Field) also works. However, since IPACS does not have the IACO code in its internal database (the airfield no longer exists), it cannot be found via SEARCH.

Quote from ApfelFlieger

KCGX (Chicago Heights Field) also works. However, since IPACS does not have the IACO code in its internal database (the airfield no longer exists), it cannot be found via SEARCH.

Meigs Field

Quote from ApfelFlieger

KCGX (Chicago Heights Field) also works. However, since IPACS does not have the IACO code in its internal database (the airfield no longer exists), it cannot be found via SEARCH.

Yes, it works for me via search, what does not show up for me are all the buildings in the city, including the ferris wheel and the stadium which is in the Chicago_City folder. Only 3 large buldings are displayed, as shown in the image I posted above. Another solution?

Quote from Tomfa

Now concerning Lukla, nothing can be fixed without the author Sascha Normann helping, I have already tried everything, because what is definitely broken, is the elevation and the orientation of the areas, which causes in my opinion a shift of the positions of all the aerodromes including those of the Helipads and whether with the .wad file or without.

I have now found Lukla (VNLK) again with me , I bought it from Aerosoft. I have also noticed the shifted positions and I have no idea why it no longer fits.

I have now made it fit again for me by creating three additional files (I use the two pairs of files marked in bold.):

• vnl4__lukla__parkposition_4.tsc/.wad
  ... is Apron #4 (unfortunately only displayable with the symbol "H")
• vnl5__lukla__heliport_1.tsc/.wad
  ... is the heliport for small helicopters on the upper terrace (unfortunately hidden in LOCATION by heliport #2)
• vnl5__lukla__heliport_2.tsc/.wad
  ... is the heliport for heavy helicopters on the lower terrace with access to the runway.

Quote from ApfelFlieger

I have now found Lukla (VNLK) again with me , I bought it from Aerosoft. I have also noticed the shifted positions and I have no idea why it no longer fits.

I have now made it fit again for me by creating three additional files (I use the two pairs of files marked in bold.):

• vnl4__lukla__parkposition_4.tsc/.wad
  ... is Apron #4 (unfortunately only displayable with the symbol "H")
• vnl5__lukla__heliport_1.tsc/.wad
  ... is the heliport for small helicopters on the upper terrace (unfortunately hidden in LOCATION by heliport #2)
• vnl5__lukla__heliport_2.tsc/.wad
  ... is the heliport for heavy helicopters on the lower terrace with access to the runway.

With your file the scenery works?

Quote from ApfelFlieger

I have now made it fit again for me by creating three additional files (I use the two pairs of files marked in bold.):

We'll try that, thanks!