It Looks Like You have to enter the ILS Frequencies and the Approach Course manuel into the CDU. Apparently it doesn't work automatically anymore? The Aerofly ILS Frequencies are not always correct. Here I use Original/Real Frequencies from the AirMate App from the Play Store Android. These also work with Aerofly Mobil 2022 and 2023.
Auto-Tuning ILS Frequencies
-
I think this is controlled by the "Auto Tune" setting....maybe it is off by default?
-
I am referring to the app settings ..there are various ways to get "artificial assistance" such as auto trim, auto rudder etc. Tuning the nav radios is one such setting. Then if an ILS approach is in the flight plan the nav radios are automatically tuned and the course preset.
-
Its worth checking as it might be off by default.
-
Well my ILS didn't work just now at KJFK. I had auto tuning set but I didn't get any intercept. I'm not sure how to tune manually, but it looks like I need to find out now!
-
Dial the number in and set the approach course. Some complex planes have a separate ILS place and others use nav one. If a DME is available it usually shows up on the default DME display.
The frequencies shown on the AEROFLY NAV page (destination/runway) are unreliable. If they don’t work try minus or plus 0.05 or look it up on line which is better as you get more information that way. A chart in ‘Images’ from a search will give safe heights, distances and courses.
Dial in the VOR and NDBs too. The more nav radios you use the more information you get, you cannot get too much.
Look up guidance videos in YouTube, there are tons of them.
(There is no nav-aid audio identification in Aerofly, the videos will put great emphasis on how important they are in real life. They let you check that the correct nav-aid is being received. The 3 letter identification might be shown in electronic nav displays.).
-
Thanks Overloaded (an appropriate name for a single pilot operating a multicrew aircraft and having to tune their Nav radios 😂 ).
I suppose the way to do it is get it ready during the cruise. I will look again at the tutorials here for the different radio systems and how the frequencies are set.
-
Well my ILS didn't work just now at KJFK. I had auto tuning set but I didn't get any intercept. I'm not sure how to tune manually, but it looks like I need to find out now!
You need to turn off the auto-tuning function, place the aircraft on the runway where you need to land, and you can see the CRS heading
-
Você precisa desligar a função de auto-ajuste, colocar a aeronave na pista onde você precisa pousar, e você pode ver o rumo do CRS
Inside the simulator where can I find ILS frequency information for each airport?
-
Inside the simulator where can I find ILS frequency information for each airport?
It’s Aerofly FS 2022 but I think it’s the same
-
I don't know if this is normal.
-
I don't know if this is normal.
It is giving the DME to EDVK Kassel airport in error even though it is tuned into Hannover 27R ILS IHNW on 108.90.
Kassel’s 27 ILS IKSW on 109.30 also gives the wrong DME. It looks like the DME to Düsseldorf, EDDL.
-
Dear IPACS there is no ILS on the 787.....??
Whenever you are on approach and you arm the loc it does not intercept and when you arm the app too you don't get the ILS frequency on the primary flight display
Any issues with the 787 on aerofly fs2023
I need help
-
- Official Post
The issue with the ILS frequency should be fixed with the next update.
You currently need to manually insert the ILS frequency and ILS course on the MFD page for the CDU, into the RAD NAV page. Then it should work.
-
I have another situation to report that I noticed on Aerofly 2023. The auto tuning option has a problem. ILS frequencies are not being automatically entered into aircraft radios or the FMC panel. In Seattle, the ILS did not work even with the auto tuning option turned on. As I didn't find the information of the ILS frequencies in the simulator, I had to look for them in IAC charts and enter them manually in the radio panel or FMC. This problem did not occur in Aerofly 2022. In this simulator version, when the auto tuning option was activated, all frequencies were automatically inserted in the radio panel or in the FMC of the planes. As the simulator's NavData is not updated, the ILS frequencies may change according to the current airac cycle. As a result, the frequency information on the IAC charts may differ from those on the simulator, which may cause a problem in which the ILS will not work when starting the approach.
-
- Official Post
I have another situation to report that I noticed on Aerofly 2023. The auto tuning option has a problem. ILS frequencies are not being automatically entered into aircraft radios or the FMC panel. In Seattle, the ILS did not work even with the auto tuning option turned on. As I didn't find the information of the ILS frequencies in the simulator, I had to look for them in IAC charts and enter them manually in the radio panel or FMC. This problem did not occur in Aerofly 2022. In this simulator version, when the auto tuning option was activated, all frequencies were automatically inserted in the radio panel or in the FMC of the planes. As the simulator's NavData is not updated, the ILS frequencies may change according to the current airac cycle. As a result, the frequency information on the IAC charts may differ from those on the simulator, which may cause a problem in which the ILS will not work when starting the approach.
That is the same issue, so I moved it over here.
-
I have the same problem. Even when I set up an ILS approach and set the right ILS frequency nothing happens. It doesn't find any signals when I press the approach mode button. It shows that it is armed for the localizer and the glideslope, but it doesn't find any signals. It does work in Aerofly fs 2022.
I have tried it with different airports and aircraft.
-
Eu tenho o mesmo problema. Mesmo quando configuro uma abordagem ILS e defino a frequência ILS correta, nada acontece. Ele não encontra nenhum sinal quando pressiono o botão do modo de aproximação. Mostra que está armado para o localizador e o glideslope, mas não encontra nenhum sinal. Funciona no Aerofly fs 2022.
This auto tuning bug has been fixed in the latest updates. Now the frequencies are being automatically inserted in the radios panel and FMC of the planes. I am not having this problem. When there are divergences in frequencies I look for them in IAC charts.
