- Official Post
@FlyOverAsia: We will implement a cache cleanup in one of the next versions.
@FlyOverAsia: We will implement a cache cleanup in one of the next versions.
Can anybody please upload some video of streaming scenery not previously covered by DLC? for example KSAT, MMMX, SBRJ, etc
Can anybody please upload some video of streaming scenery not previously covered by DLC? for example KSAT, MMMX, SBRJ, etc
Schon vorweg zu sagen,es ist nicht wie bei MSFS.
Aber es ist auch sehr gut,und ich denke es wird noch besser.
Schönen Abend allen.
@FlyOverAsia: We will implement a cache cleanup in one of the next versions.
We definitely need that in mobile too.
We will implement a cache cleanup in one of the next versions.
Please with an adjustable cache size limit and an editable path for the cache.
This will minnimize IPACS download costs, if users work with a bigger cache and do not need to download the cultivation again.
Dear Jet-Pack (IPACS)
Aerofly FS 4 Version 4.03.01.16 (20230922)
Streaming OFF
A380 (Air France)
I found bugs about the A380 MCDU cheats (unless it is a work in progress).
PERF / APPR
INIT
F-PLN / FIX INFO
See attachments as a reminder .
Best regards
First of all: congrats for this new beta-update with it's possibiliy to stream the scenery. This is a big step in the right direction!!!
Is it possible to increase the level of ground-scenery (images) while steaming in a future update?
I don't see any scenary imagery even when data streaming is set to on :(,
except for the parts where it has already been before.
First of all: congrats for this new beta-update with it's possibiliy to stream the scenery. This is a big step in the right direction!!!
![]()
![]()
![]()
Is it possible to increase the level of ground-scenery (images) while steaming in a future update?
Ich finde auch die Bodenscenery,da müsste noch was gemacht werden..wie Gras und die Bäume noch etwas anders, Laubbäume und Fichten Wälder( in Europa).
Aber sonst Super Arbeit.
Ich hofffe da kommt noch mehr.
Schönen Abend Euch allen.
Dear Jet-Pack (IPACS)
Aerofly FS 4 Version 4.03.01.16 (20230922)
Streaming OFF
A380 (Air France)
My wife's brother has just passed by home. Whatever, he was an A380 pilot at Air France.
I asked him about the flight level of the A380 that Aerofly tends to impose. He said that 43000 FT is far too much. He said A380 > FL380 and at the end of the flight you can climb at FL410 NOT MORE. You can reach directly FL380. The climb is fast like it happens in Aerofly.
Time Skip brings the plane at FL430 whatever your chosen cruise level (in an unstable situation with long hauls PARIS/MIAMI). Like with A320, it sets FL CRZ at FL440 but stays at FL430 for the A380, and FL400 for the A320 and stays at FL390. For the both planes the max flight level will set whatever the initial chosen flight level (for example, I can't fly a CDG/MIA at FL300 if I use Time Skip).
At an altitude constraint, the A380 PFD does no longer show the targeted flight level above the altitude band (see the attachment). But, the climb will start again after the constraint as expected.
Best regards
Is that me, or the moon can now be a croissant?
The update fixes the duplication of screenshots (as bmp and png files) . Only png files now, which use about half the storage that bmps did.
At an altitude constraint, the A380 PFD does no longer show the targeted flight level above the altitude band (see the attachment). But, the climb will start again after the constraint as expected.
Do you have a video where I can see this happening in the real aircraft?
The A320 does not show the selected altitude as long as it is in the ALT CST or ALT CST* mode and instead only shows the constraint altitude above or below the tape when it is off-scale. When the altitude is within the visible range of the altitude tape the fixed readout is replaced by the moving altitude bug. So far the A380 matches that exact same behavior. But if you find any video of the real behavior I am happy to change it.
Do you have a video where I can see this happening in the real aircraft?
The A320 does not show the selected altitude as long as it is in the ALT CST or ALT CST* mode and instead only shows the constraint altitude above or below the tape when it is off-scale. When the altitude is within the visible range of the altitude tape the fixed readout is replaced by the moving altitude bug. So far the A380 matches that exact same behavior. But if you find any video of the real behavior I am happy to change it.
I might have dreamt it.
Dear Jet-Pack (IPACS)
I had a glance at the streaming version.
It looks like that only the same airports in the DLCs have STAR, SID, place to spawn in Cold&Dark, doesn't it?
Thanks
Vielen Dank für das schnelle update ,an das Team von IPACS.
A320 Triebwerke drehen sich wieder,und die Windkraftanlagen haben wieder 3 Rotorblätter.
Danke
Bei mir leider auch ,wie alle Inseln im umkreis!!