• Hello, I'm not sure if it's a mistake. When I activate both autopilots, this yellow warning appears. Please let me know if this is normal. Thank you.. sa

    Works just like in the real world, yes.

    The info shows that only one autopilot is currently being used, even though you selected two. When both NAV receivers are set to the same ILS frequency and the same course is set then this caution goes away below about 1000ft or so. Then the system is in the auto-land configuration.

    Edit: But it looks like the G/S indication on the right MFD isn't correct, it should be at the right edge of the screen, not the center.

    Regards,

    Jan

  • Works just like in the real world, yes.

    The info shows that only one autopilot is currently being used, even though you selected two. When both NAV receivers are set to the same ILS frequency and the same course this caution goes away below about 1000ft or so. Then the system is in the auto-land configuration.

    Edit: But it looks like the G/S indication on the right MFD isn't correct, it should be at the right edge of the screen, not the center.

    OK, the two autopilots work and the yellow single warning then disappears. Everything is fine, it was my mistake, sorry. The GS display on the right is correct in my opinion 🤷.