Aircraft controls are living their own life. First time it happened yesterday. Can anyone help with that. (FS 4 beta)
In FS 2 everything works great
Aircraft controls are living their own life. First time it happened yesterday. Can anyone help with that. (FS 4 beta)
In FS 2 everything works great
Did you engage the copilot perhaps with the button c?
What operating system and what hardware controls do you use to fly?
Jump on “stable_4.05”
Now all works fine.
Did you engage the copilot perhaps with the button c?
What operating system and what hardware controls do you use to fly?
Didn’t use copilot. Trying many times throughout the day with same problems.
After updating to beta 4.05 all things became looking good.
Win 11, keyboard with mouse as controllers
All those strange things began yesterday after receiving latest updates.
There is no A319 on beta 4.05. Damn
Soon there will be if you look at the message I just sent.
There is no A319 on beta 4.05. Damn
The A319 might be further back in the list, please double check.
Already switch to release version.
And problems been back again.
Don’t know how, but the problems truly have been caused by copilot. Not engaged by me though. It works by it’s own.
Been solved by disabling key binding on controls settings.
Works for now. I hope, it will be further
Thanks for Your supportiveness.
Already switch to release version.
And problems been back again.
Don’t know how, but the problems truly have been caused by copilot. Not engaged by me though. It works by it’s own.
Been solved by disabling key binding on controls settings.Works for now. I hope, it will be further
Thanks for Your supportiveness.
Great to hear that you could sort it out but unbinding the key command.
Still got the problem.
With Global scenery enabled the copilot was coming live again.
Disabling Global and deleting main.xx file resolved the problem
Is it possible to disable copilot at all?
The copilot doesn't come on all by itself, it requires you to press a button or key. Please double check that you have no key or button assigned to the copilot function. What controller do you use to fly?
Am using keyboard. Neither copilot and copilot overlay are assigned. But that’s exactly what happens with copilot. It comes by itself occasionally. It seems like madness.
A little tired from that invisible assistance
Other settings that you can check are the assistance settings. Disable auto gear, flaps, rudder to make sure it doesn't interfere with the flight controls. Per default these should not be enabled on the PC version. You can keep brake assistance, lights, warnings, cockpit, etc or adjust them to your liking.
That is quite strange behavior. Can you please try out when exactly the copilot turns on? If you enable the flight info it should show a blue bubble underneath the flight info when the copilot is engaged.
It’s seems more like remote controlling than autopilot behavior. Randomly performing an aileron roll or setting thrust levers to the edge modes, trimming pitch to max or min while in flight.
I hope it’s kinda joke
All auto functions are disabled
That does sound like there is a controller connected to the sim. If you go to the controls menu and go to the input devices menu, are there any devices listed?
OK, I found one potential cause:
Please go to the controls menu to the simulation category and remove the assignment for "Glider action". This function needs to be renamed and currently does more than just control the glider, it's a general action key, used for the game controller "X" button to start the winch, start the aerotow, disconnect the rope and to engage the copilot. If no glider is loaded then this button currently engages the copilot.
Nope, there are no controllers connected. Glider action is not assigned.
When refreshing input devices, it prompts to reset configuration. Maybe this could help?
Going to give another try. With Global scenery disabled at first. Then will switch it on.
Such strange things. It doesn’t seem to be an artificial behavior. More like that someone kidding me. Don’t know why. And who got access to the system and sim
Can you describe in more detail what exactly you see happening? Which aircraft do you fly, what flight controls behave "on their own"?
For example: in fly by wire aircraft we simulate all kinds of flight envelope protections which will actively override pilot inputs just like in the real world.
Made a video, but unfortunately it’s not allowed to share.
Just now before taxiing thrust levers were pushing to TO mode “by itself”. I don’t know by whom.I didn’t even release parking brakes
I can share a link to the video stored on Onedrive
Recently flew on Learjet
But same problems have been seeing with Hornet yesterday.
Not trying big liners yet
https://1drv.ms/v/s%21AiR7Db56eRJSv-d4K2UB6NAfPQx-mw
I hope it has public access.
Second vid is longer:
https://1drv.ms/v/s%21AiR7Db56eRJSv-d7voAUItOhd02aVg
On the Hornet yesterday I got “suddenly nose down” just after take off. On second attempt got throttle idle on half minute after take off
It’s not copilot isn’t it?
Thank you for the video. It does look like there is a controller or some input device connected to your PC that is jittering and is assigned to the throttle input. This has probably nothing to do with the copilot.
If you go to the controls settings for the throttle, do you see any axis or any input assigned there? Per default it should only be the keys W and S, which is ok. If there is an assignment in the center click on it and press the backspace key or delete key to remove it.