Hello aerofly community,Its been a month since I bought aerofly fs 4.
And Im having a lot of fun flying in this sim 
But recently I realized that flying above london city is too much for my laptop(Since I bought 8GB RAM on my mac)
So I would like to know which graphical settings should I adjust? There are many things that adjustable in aerofly graphic setting and I dont know which one to adjust
.
You can reduce the building density in the graphics quality settings, which should help with dense cities like London.
You can reduce the building density in the graphics quality settings, which should help with dense cities like London.
Thank you for your advice.Although it may be a little rude of me to ask this, but I would like to keep the building density of medium, Is there a another way to increase fps?
It runs amazing on Mac, but when flying over London, LA, NYC, you sure get quite a dip. The buildings are too blame, when I turn them to low I am limited to my monitor!
For now I settled on ultra for most, high for shadows (I get too much aliasing around shadows going higher) and buildings to high, trees to low. The last setting doesn’t impact performance that much, but on low it is still very full of green everywhere so I keep it like that.
Problem is that 99% of the time my frames are far above 70 fps on a standard Mac mini m4. It would be nice to see some future improvements in those big cities, maybe more a dynamic building density. I agree with you that going below medium is such a huge difference, almost like a few steps in between could be useful. But I guess these cities impact performance on most systems anyway, now it goes to 25 fps above LA which is acceptable and doesn’t impact the experience that much.
It runs amazing on Mac, but when flying over London, LA, NYC, you sure get quite a dip. The buildings are too blame, when I turn them to low I am limited to my monitor!
For now I settled on ultra for most, high for shadows (I get too much aliasing around shadows going higher) and buildings to high, trees to low. The last setting doesn’t impact performance that much, but on low it is still very full of green everywhere so I keep it like that.
Problem is that 99% of the time my frames are far above 70 fps on a standard Mac mini m4. It would be nice to see some future improvements in those big cities, maybe more a dynamic building density. I agree with you that going below medium is such a huge difference, almost like a few steps in between could be useful. But I guess these cities impact performance on most systems anyway, now it goes to 25 fps above LA which is acceptable and doesn’t impact the experience that much.
Wow that is very helpful info! thx
What resolution do you currently use? If you have a retina display it might be too much for the graphics card. Please try if using a lower resolution improves performance significantly.
What resolution do you currently use? If you have a retina display it might be too much for the graphics card. Please try if using a lower resolution improves performance significantly.
My current resolution setting is 1470✖️956 (If you meant resolution value in Mac system settings.)
I've about 25 FPS, which is good enough for flying flawlessly, on an MacbookAir M2 (2022) with 10core GPU, when I'm fly in an A319 over London with this settings ...
I've about 25 FPS, which is good enough for flying flawlessly, on an MacbookAir M2 (2022) with 10core GPU, when I'm fly in an A319 over London with this settings ...
Wow thats quiet smooth fps!! I assume that ur mac book has 16GB RAM not 8GB.
No, it's the MacBook Air M2 2022 with 8 GB RAM, 512 GB HDD and 10-core GPU. I assume, the gpu could be the point, the models with 256 GB HDD have only 8-core GPU.
No, it's the MacBook Air M2 2022 with 8 GB RAM, 512 GB HDD and 10-core GPU. I assume, the gpu could be the point, the models with 256 GB HDD have only 8-core GPU.
Oh that makes sense why my aerofly act so laggy unlike yours...
