Had Aerofly with TCA sidestick for a week now. The X/Y settings are now stuck. See video showing yoke and when I pull back on the stick. Resetting to default configuration does not help.
Video: https://share.zight.com/2NuZ2AJQ
Yoke getting stuck in wrong position (TCA Sidestick)
-
DavidJames -
November 13, 2025 at 12:42 PM -
Thread is Resolved
-
- Official Post
Please re-calibrate the device using the button in the top right corner of the menu (with the cross-hairs) and make sure to fully deflect the controls left and right when asked to. When asked to center the control move the throttle to 50% and release the control stick.
-
Please re-calibrate the device using the button in the top right corner of the menu (with the cross-hairs) and make sure to fully deflect the controls left and right when asked to. When asked to center the control move the throttle to 50% and release the control stick.
This did not resolve the problem. However, I have discovered the cause!
Rotate the monitor Aerofly is running on to 90 degrees (see image)
Having the USB plugged in to the same monitor may also be important.
(Side note: I work with two vertical monitors though sometimes rotate the main one. I've been enjoying flying with a vertical 32" monitor! Easier than rotating it constantly between work/play, and it's great for seeing the instruments.)
