Currently, FS4 only loads the IPACS airport in Hakodate. I still have ours in FS2 (I think). How do I replace "ours" with the one in FS4? I like it better – the runway markings in IPACS are too bright for me. I mean the yellow.
Airport Sceneries created by Pilot Boy | FS 4 & FS 2 | Freeware Downloadlink
-
-
Moin Marco,
if you send me the FS 2 airport, I will gladly transfer it to FS 4 and also describe how it to do.
Tschüss, Michael
-
Currently, FS4 only loads the IPACS airport in Hakodate. I still have ours in FS2 (I think). How do I replace "ours" with the one in FS4? I like it better – the runway markings in IPACS are too bright for me. I mean the yellow.
I did convert the Hakodate airport to FS 4. It used to be on Flight-sim.org
But I also want to update it, so thats why it's not in the google drive
-
Hello, the buildings levitate at RKPU, can you check it? Maybe the problem is on my side.
Also, why there is only one runway at OOMS? Just asking, cause I don´t understand why it wasn´t done.
-
The buildings levitate at RKPU, can you check it? Maybe the problem is on my side.
Also, why there is only one runway at OOMS?
At RKPU the building is floating, because I have an elevation-file which was on Flight-sim.org. Thanks for reporting this.
In Muscut the problem is, that I will have to rework the whole apron and runways, before i can fix this issue. I wanted to release the airport, without long waiting times.
-
And sorry once again for interrupting, at RKPU when I spawn at the south gate, I am unable to use pushback.
-
!Update! Ulsan RKPU has been updated.
If you do NOT have the Elevation-Pack from TomSimMuc for South Korea (Cannot be downloaded anymore) do following steps:
1. Download, unzip and install the scenery
2. Also download the "rkpu_default_elevation"-file
3. Find the "rkpu.tsl"-file in the scenery and replace the"rkpu.tsl"-file with the"rkpu_default_elevation"-fileIf you have the elevation-pack, nothing has to be done.
Perfect, this fix worked perfectly. Thank you very much.
Talking about Elevation-packs/fixes, would you perhaps have an elevation fix for LEBL and LEMD too? -
!Upadate! Madinah/Medina OEMA airport has been released and can be downloaded from the Google Drive
Enjoy!
-
Thank you for your activities at the airports.
I'll add 2 demo folders that I've created to be able to check settings if necessary:
(1) 000007_apt_groundtext_taxisign_20250614.zip
As the name suggests, this is about groundtext and taxisign.
(2) 000015_apt_jetway_footway_20250615.zip
This is about the jetways.
I have positioned both airports in the Pacific near the equator, where they work and do not disturb. I have tried to map all the possibilities there. Almost all files are text files. With the TMB files, it makes no sense to change them in text mode so that they are compiled if they are too large.In the TAP files, I marked the elements that can only be completed by hand with ADDITION and "//" on the right margin.
-
Bro van you help me in muscat there is only one runway working she looks like a taxiway there is no touchdown zone and when i try to take with the a380 on it it keep saying you are on a runway
-
Bro van you help me in muscat there is only one runway working she looks like a taxiway there is no touchdown zone and when i try to take with the a380 on it it keep saying you are on a runway
I will have to rework the whole apron and runways, before i can fix this issue. This will take some time.
The problem is that in Aerofly Navdatabase there is only one runway in Muscut. Which is the older (south) one. So when planning a flight to or out of Muscut you can currently only choose the runway, which looks like the taxiway. Because at the time I made this scenery on Google Maps it seemed, that the older runways wasn't in use anymore.
I guess you will have to fly visual, to the new (north) runway.
-
Just a heads up, Beautiful scenery, but the ILS for 17 into -OEMA is broken, the glide slope is incorrectly placed. Definitely not flyable in Low VIS
-
Unfortunately, ILS cannot be entered by the creator of an airfield, because this data is imported by FS ... via the database.
-
!Update! Roi Et VTUV airport has been released and can be downloaded from the Google Drive
Enjoy!
-
Pilot Boy, you are doing a great work with your airport designs, thank you!
-
Hey I wonder about the airport light, has it work during night time? or it need to be in development? (I'm just curious)
-
ohh Thank you for your clarify, But in the future you have plan to make it become functional?
