A350 Advanced Mod - Beta Tester - PC

Am looking for a single user to test the final version of a collection of mods I have put together, ideally someone who is using a clean version of FS4 without any mods and a mid to low-end system. I'd like to test if any of the enhancements are causing fps drops . Please send me a PM if you are interested. I already have a couple of people testing on PC and MAC.

Thanks. Details Below.

PC only

Anyone is free to convert my mods. I don't have the time to work on multiple platforms, unfortunately, this takes months of work

For Mod Beta Testers - Fueling Instructions

For anyone not using my dispatch mod to load the aircraft

1. Set the aircraft's ZFW according to your flight plan

2. Enter Block Fuel; in my case, 60T is required for the trip to Dubai, and a go-around and diversion to Bahrain (60T will take about 35mins to fuel, which is realistic)

3. Select Refuel on the rear overhead panel. You'll get an ECAM msg and ground crew will start refueling the aircraft (seat belts should be off during refueling)

Ground crew will stop fueling once the block fuel target has been reached

4. This next part is a workaround since I dont have much access to the inner workings of the FMC

If you look at the picture above, in the TOW/LW fields near the bottom right, you can see takeoff weight and landing weight are wrong; by default, it just shows the current aircraft weight.

Trip also shows the wrong info: 0.5 tonnes. As a workaround, you can now edit Taxi fuel, and it will update trip fuel. So, enter your flight plan's trip fuel into the taxi field; this will also update the trip fuel, and show a correct prediction on the flight plan page too.

Here is how mine looks after entering the 45T trip fuel from my flight plan

13.4T of fuel estimated on landing

Take off weight (TOW) 259.2T

Landing weight (LW) 210.4T

APU burns fuel, so don't leave it running on the ground; normally started 15 to 30mins before departure. A ground air cart is included, so that can be used for aircon on the ground.

Everything's wrapped up on my end, just finished the ECAM messages, to match the real aircraft's ECAM whilst refueling. Specifically, the Refuel Panel door. Will hopefully have this ready for download this weekend. The download link will be via PM, as I don't want lurkers downloading it, then logging support tickets with IPACS. Simbrief or some sort of flight planner is definitely recommended for fuel calculations.

I have an Aerofly FS4 SimBrief profile for the A350 (15% higher fuel burn) I can include it in the download link.