Aerofly Startgerät - Manual set-up and import of flight plans

  • Thanks for this new version and the continous support, Frank. I’m sure we’ll get the nasty UID bug squashed sometime soon. 😁💪🏻

  • Hello,
    Should the payload and fuel part work? For me it sets the FOB on the A320N to 7800 and the payload to 10000.
    I see that the main.mcf has a new data on the fuel_load_setting, but it doesn't work for me.

    P.S.: I tested it with the Cessna 172 but it is the same.

  • Should the payload and fuel part work? For me it sets the FOB on the A320N to 7800 and the payload to 10000.
    I see that the main.mcf has a new data on the fuel_load_setting, but it doesn't work for me.

    Are you on the Beta branch of Aerofly FS 4? I also see that the fuel settings in the main.mcf are neither read nor written.

    Even if I change the fuel settings from within Aerofly FS 4 (not using the Startgerät at all), this settings gets not saved to the main.mcf - and consequently gets not read from the main.mcf on the next startup, completely resetting the values:

    1. Start Aerofly FS 4
    2. Set the aircraft to Cessna 172
    3. Set fuel and payload to anything, e.g. 70 / 100
    4. Start a flight
    5. Quit Aerofly FS 4
    6. Check main.mcf - fuel settings have not been saved
    7. Restart Aerofly FS 4
    8. Check fuel and payload - it has been reset to 0 / 0

    Additionally:

    1. Remove fuel_load_setting from main.mcf
    2. Start Aerofly FS 4
    3. Set the aircraft to Cessna 172
    4. Set fuel and payload
    5. Start a flight
    6. Quit Aerofly FS 4
    7. Check main.mcf - it now contains an invalid fuel setting block
    Code
            <[tmsettings_fuel_load][fuel_load_setting][]
                <[fuel_load_configuration][configuration][Invalid]>
                <[string8u][aircraft][]>
                <[float64][fuel_mass][0]>
                <[float64][payload_mass][0]>
            >

    Anyone else encountering this issue? This might be a possible bug report to the developers of Aerofly FS 4.

  • A new version of the Aerofly Startgerät is available for download.

    https://github.com/fboes/aerofly-startgeraet/releases/latest

    The focus was on improvements to the user interface. SimBrief users have a direct link to dispatching as well as the ICAO codes for aircraft and liveries shown in the selection menu.

    The flight category in regards to weather is now a select field, which allows for quickly setting up VFR / IFR flights.

    I ran out of tokens trying to fix the UID issue, even though it seems that the UID actually contains the coordinates of the waypoint (as well as the auto-generated identifier for ad-hoc waypoints) - so these will need to be fixed in the next version(s), as well as improving the placement of the aircraft (which probably is unnecessary, because the Startgerät will most probably never learn how to find the right parking positions).

    Checked with both Claude and Gemini pro versions.

    • Top 32 bits: Pure longitude code. (top_32_bit = round( (longitude + 180) / 360 × 2³² ))
    • Bottom 16 bits: Type code (airport (0500) / runway (0800) / SID (4400) / STAR (4800) / Approach (4C00) / RNAV waypoint (C000) / airways (4000)
    • Middle 16 bits: I have no idea at all. Something to do with the latitude and altitude maybe, but can be a lot of things.
  • The UID is made of the world grid coordinate (Aerofly's own coordinate system) with additional bit flags like type of the item (airport, runway, waypoint, VOR, ILS, VORDME, TACAN, VORTAC,... airway, leg, discontinuity, etc. etc.). Even thought the coordinate may not change the flags might very well be moved or changed.

    Regards,
    Jan

  • Checked with both Claude and Gemini pro versions.

    • Top 32 bits: Pure longitude code. (top_32_bit = round( (longitude + 180) / 360 × 2³² ))
    • Bottom 16 bits: Type code (airport (0500) / runway (0800) / SID (4400) / STAR (4800) / Approach (4C00) / RNAV waypoint (C000) / airways (4000)
    • Middle 16 bits: I have no idea at all. Something to do with the latitude and altitude maybe, but can be a lot of things.

    In my post #13 in the thread "How to create easy airport ..." I explained how the conversions from the "GeoCoordinatesSystem (GCS)" to the system used in FS 4 work for:

    • LONGITUDE
    • LATITUDE
    • DIRECTION (HEADING)

    Tschüss, Michael (🍎🚁)

    Configurations:

    - MacBook Pro (16", 2024); Chip: Apple M4 Max; actual macOS
    - Controllers: | WinWing: URSA MINOR-Fighter-Joystick R, EFIS-L & FCU & EFIS-R | Thrustmaster TCA AIRBUS EDITION: 2x Quadrant, 2x Quadrant Add-On | Pro-Flight-Trainer: PUMA X | Steelseries: Nimbus+

    - iPad (12,9", 4th Generation, RAM: 6 GB); actual iOS | Steelseries: Nimbus+

  • Checked with both Claude and Gemini pro versions.

    • Top 32 bits: Pure longitude code. (top_32_bit = round( (longitude + 180) / 360 × 2³² ))
    • Bottom 16 bits: Type code (airport (0500) / runway (0800) / SID (4400) / STAR (4800) / Approach (4C00) / RNAV waypoint (C000) / airways (4000)
    • Middle 16 bits: I have no idea at all. Something to do with the latitude and altitude maybe, but can be a lot of things.

    Correction:

    24-24 bit for Lon/Lat, and 16 to the flags.

  • Hi Frank, if I remember well, you had a webpage where we can see the world map with the sim airports (not inside Missionsgerät). Could you share the URL please?

    Of course, here it is:

    Aerofly Flight Simulator Airports Map
    See all of Aerofly FS4 airports on the map and check if a specific airport is included.
    fboes.github.io

    (It already contains the beta airports)

  • There is a new release for the Aerofly Startgerät.

    Release Release v2.7.0 · fboes/aerofly-startgeraet
    Downloads are available for Microsoft Windows, Apple macOS and Linux. Download the appropriate artifact for your platform below. aerofly-startgeraet-gui-*…
    github.com

    It contains multiple minor improvements to the GUI - and multiple major changes:

    • Setting position and initial speed of the aircraft has been improved. (It is still recommended to manually set the starting position in Aerofly FS itself.)
    • The fuel & payload selector has been removed as it was not working as intended. As of now, there is no way to reliably set fuel & payload in Aerofly FS by the Aerofly Startgerät.
    • Flight plan UIDs have been improved and are now almost exactly matching UIDs generated by Aerofly FS - but for airports, runways and named fixes. Still there should be some improvements visible in the flight planning menu as well as navigational displays inside Aerofly FS.
    • The aircraft and livery menu will also show ICAO codes if available. These ICAO codes can be used by SimBrief to set aircraft and livery directly from SimBrief.

    The release does not yet cover the upcoming changes to Aerofly FS (more liveries, more airports) - this will be a separate release.

  • Great news, Frank! Thank you once again for your dedication and work, i’m following this project of yours with great enthousiasm and will test this new version very soon.

  • Hello!, I'm a super newbie, but I'd like to give my support, through my experience. First: this app is what I was looking for! Thanks Thanks Thanks. I share my workflow: LittleNavMap for Mac, just to trace the route. If possibile using the online airport documentation for the approaches. Then I export the flight plan in .pln. Then I Import the file in Startgerat for other parameters. At the end in FS4: adjust fuel and load and position the aircraft.

    I had import problems with an older version of Startgerat, but with the latest one: all works well.

    If I can help you in anyway to verify aspects of this workflow, I'd be glad to help.

    bye bye

  • There is yet another release for the Aerofly Startgerät, this time the 2.2.2 (aka the "Airwolf" update):

    Release Release v2.7.0 · fboes/aerofly-startgeraet
    Downloads are available for Microsoft Windows, Apple macOS and Linux. Download the appropriate artifact for your platform below. aerofly-startgeraet-gui-*…
    github.com

    This time, I incorporated even more feedback (special thanks to AeRodri for detailed bug reports), so this gives you:

    • Made flight plan import more bullet-proof (it now imports legacy file formats, even with their subtle changes)
    • The app now checks every now and than if any updates are available, so you do not need to check for yourself
    • In case you missed it: The SimBrief import has been made more robust in the last update, so it does not fail on unknown ICAO aircraft codes. Also the ICAO aircraft codes as well as the ICAO airline codes have been made more prominent in the Startgerät selection, so you know how to set-up your flight in SimBrief

    Have fun testing this, for the next two weeks the development of the Startgerät takes a break. And as usual: I am happy for any feedback.

  • We now have the 2.2.5 update - do not ask what happened in the meantime. 😉 Here it is:

    Release Release v2.7.0 · fboes/aerofly-startgeraet
    Downloads are available for Microsoft Windows, Apple macOS and Linux. Download the appropriate artifact for your platform below. aerofly-startgeraet-gui-*…
    github.com

    What's inside:

    • Lots of GUI improvements, including wide-screen support as well as forcing dark mode. (Hat-tip to Aerofoil2011 und AeRodri )
    • Added keyboard shortcuts
    • Fixed the update notification mechanism

    Have fun.