Hi, I keep on setting field of view to a wider setting than the leftmost 'narrow', but every time a new plane starts after a crash it defaults back to 'narrow'. It drives me nuts. I had that phenomenon also in aerofly 5. Using aerodly RC7 ultimate on a late 2009 iMAC w/ latest OSX. Thanks for your help.
field of view defaulting to narrow
-
-
Hello, I have the same problem with the "self adjusting" zoom factor. Unfortunately I couldn't find a solution. I'm running RC 7 on a Windows 7 PC.
Anyone out there who can help?Thank you and regards
slowflyer-8 -
Same problem here. Almost like auto-zoom zooms in but then will not zoom out. Running a 27" i7 iMac.
Still have Aerofly 5 which does not exhibit this problem. ( running Aerofly 7.0.7 Mac )
AF 7 is pretty useless with this problem. Hope to see it addressed ASAP.Bill...
-
Could you please check if 'auto zoom' is active under the viewing options?
If its not active and you still see this effect, please describe in detail how we can reproduce this.
-
Camera settings are set to Autozoom 'off' and
Field of view 'wide'.Take off and fly. Soon the image will appears to zoom in maybe 10X magnification or more.
Land and check camera settings. FOV is now set to 'narrow'.I do not see the problem if I run AeroFly 5 on the same i Mac with the same
settings.
Keep ground in view also checked but this does not affect the problem.Bill...
/Users/wjm/Desktop/Screen Shot 2014-03-23 at 7.45.59 PM.jpg
/Users/wjm/Desktop/Screen Shot 2014-03-23 at 7.46.34 PM.jpg
-
I have aeroflyRC7 and have the same problem. It spoils an otherwise good rc simulator, that there is such a problem. I hope something can be done about it soon. thank you in advance.
Mark