TMC file?

The Wiki says there is a sample TMC files and to put in required coordinates, but then as far as I can see, it doesn't say what to do with the file.

Do we just always edit the sample one? Where do we save the edited version?

Thanks

In Geoconvert folder is the config-sample-only. Do I edit that one then?

Ooh this?

http://ndgrad.co.uk/fs2/fset2tmc/

Thanks, now I get no input aerial images found, yet I copied all to inut_aerial_images.

Says see tm.log...

0.00-tmmodule: (tmsystimer,1)

0.00-tmmodule: init modules=(tmsystimer=ok) done

0.00-tmmodule: Program version 1.2.3

0.00-tmmodule: Copyright (C) 1998-2017 IPACS

0.00-tmsyswin: memory=(physical=16333MB, avail=11856MB) (virtual=18765MB, avail=134217727MB) (27 in use)

0.00-tmsyswin: operating system (10.0)= Microsoft Windows 10 or newer

0.01-tmsyswin: monitor size = 598 336

0.01-tmmodule: fullscreen modes=(1024x768x32x60) (1024x768x32x70) (1024x768x32x75) (1152x864x32x60) (1280x768x32x60) (1280x800x32x60) (1280x960x32x60) (1280x1024x32x60) (1280x1024x32x75) (1360x768x32x60) (1366x768x32x60) (1600x900x32x59) (1600x1024x32x59) (1680x1050x32x59) (1768x992x32x25) (1768x992x32x30) (1920x1080x32x59) (1920x1080x32x29) (1920x1080x32x50) (1440x900x32x60)

0.12-tmsysprogram: application init. commandline='config-windsor.tmc' userfolder='./'

0.13-tmsyswin: init window=(mdf=60Hz) (window=0x0x656x519) (client=640x480) (screen=1920x1080) (32bpp) (60Hz) (windowed mode)

0.15-tmmodule: initializing directx= done

0.55-dummy: resolution=640px ss=598.00mm -> res=640

0.55-dummy: create fbo = 640 480

0.56-tmrenderer_font: loading font 'texture/fontdisplay.tff'=(512x512) (h=37) (nc=8365) ok

0.57-elevation: loading configuration file 'config-windsor.tmc'= 6 regions

0.57-elevation:

0.57-elevation: 0 input aerial images found:

0.58-tmmodule:

0.58-elevation: ERROR: (no input aerial images found in './scenery/images/')

Ah ok thanks will give that a go