Posts by IPACS Support

Das Upgrade gibt es fuer aerofly5 Kunden nur auf die RC7 Ultimate Version.
Ein Upgrade auf die Pro Version macht fuer aerofly5 Kunden keinen Sinn.

Eine Version des aerofly RC 7 "dazwischen" gibt es nicht.

We usually do not recommend a SLI setup. It does not give the expected benefit.

If you want to support real high resolutions, get one of the fastest 3D cards, e.g. a NVIDIA GTX 770 or 780 or AMD Radon R9 with at least 2 GB of RAM. This setup will be perfect for photo sceneries and will result in good frame rates in most situations in 4D sceneries.

We will check and see if we can incorporate the digital trims of the Interlink controller in an upcoming update.

Wir konnten den Fehler mit dem Editor im aerofly RC 7 nachstellen. Wir bringen in Kuerze ein Update, das dieses Problem behebt.

Danke fuer den Hinweis.

Dieser Fehler tritt nicht auf, wenn man die TMD per Hand editiert, also so wie von Nordland beschrieben!

Hallo,
also nur zur Klarstellung: Du hast per Hand aus dem Maja die Kamera kopiert und in die TMD Datei des Q500x4 uebertragen? Mit was fuer einem Editor wurde das gemacht. Bitte immer aufpassen, wenn manuell Aenderungen an der TMD gemacht werden, das kann schnell schief gehen.

Wir muessen das wissen, damit wir den Fehler nachstellen koennen.

Bitte noch etwas genauer beschreiben, was getan wurde!

We are already working on it. We are doing some tweaks to get the best
possible performance. We also would like to support the new retina displays.
This does require some changes on our engine and menu code.

And then we have to hope Apple approved our simulator, which usually takes
another 1 or 2 weeks.

So please be patient

The Realflight Interlink Elite controller is compatible with aerofly RC 7.
Check and see if the Interlink is shown as a joystick in the Windows system settings, if thats the case, you can use it with RC 7.

The Phoenix interface is NOT compatible with aerofly RC 7, it uses its own communication protocol.

We will improve the compatibility list on our website to state clearly what devices are compatible or not.

Hi, please contact the IKARUS support at https://localhost/www.ikarus.net. They will assist you with getting the missing files.

Can you explain in more detail what your issue is? Usually you can switch your viewing position in Multi Pano sceneries by pressing Page up/down keys.
Sometimes, if the current viewing position is unsuitable for the current model or if no start position for this model exists, the viewing position is switched as well.

Hallo Michii, was fuer Modifikationen hast Du am Maja vorgenommen. Wir versuchen diesen Fehler zu reproduzieren.

Gary, you are right, the app is growing quite a bit. We will rework the In-App purchases so they will be downloaded on demand only. We also will add some compression to our files to further reduce the size of aerofly FS on iOS. However, we would still need some space due to the highly detailed scenery textures and the detailed models.

We are still unsure whats causing this problem.

If possible, please try to do the following even though this would remove all your progress:

- Delete aerofly FS from your iPad including any GameCenter progress
- Download aerofly FS again, and start over clean

Hallo Dennis,
wie hoch ist denn die angezeigte Framerate vom RC 7?

Bitte ein Modell auch einfach mal auf den Boden stellen und nur Hoehen oder Seitenruder geben. Sieht man dort eine Verzoegerung?

The new iPad Air and iPad Mini allow us indeed to add some more graphic features due to their high performance. We will evaluate it and if these iOS devices are fast enough, we will add more details.

Hi, thanks for your feedback.
We will probably rework the flap interface in one of the next versions, so they match the real airplane closer. As far as the speed brakes go: Adding this feature will increase user interface complexity, so before we implement this, we have to work on our user interface like we mentioned before.
If we don't keep the simplicity we will frustrate users that don't have the required knowledge.

Hi Mark,
unfortunatly, we are unable to make aerofly FS a universal app, due to some restrictions of how we can limit compatible iOS devices.
That means aerofly FS on iPad and iPhone are actually two different versions!

However due to some changes made by Apple recently we might able to convert the iPad version into a universal app. We can't say yet if this version will be approved by Apple, but we are going to try it with the next update that is targeted for Q1 2014.

Gary, thanks for your feedback. Adjusting the pan area and keeping the simulator usable is fairly difficult. We tried to increase the area but when we did so, many people accidentally hit the pan area while they tried to move the throttle slider or flaps. We will check if we can increase this slightly in the next update.

Sorry, the Mac version will not be available this year. We will post infos once we can say for sure when it will be released, but hopefully we can get it done in Q1 2014.

If Apple approves our app next week we will have an update ready before christmas this year. In this version we moved the rudder back to the right.
We are thinking about a more configurable screen where the user can move the controls to the locations he likes. But we are not sure yet, on how to do this.
As complexity increases it gets more and more difficult to please everybody with respect to the user interface.

User created models and sceneries will be possible soon. We changed a few minor things on the file format. Once we have this documented, we will release a patch and instructions to the designers so they can get started with adding contents to aerofly RC 7.