Posts by errorwolfi

Hy Dave

as Jürgen explained - i although think, that this ist not a real On/Off Switch, like power on. i think that this is a 7 channel USB Transmitter. so your 4 channels for Rudder, Elevator, Aileron an gas are on the sticks, the "on/off" switch can be used for retract etc. (simple on/off function), the poti above maybe can used as a linear channel etc for canopy open/Close, and the switch on the left (if i'm right) seems to be a 3 Position switch, so you can use it for flaps etc. with 0%, 50% and 100%.
please let us know, if we're right.

Wolfgang

Hy Dave

I don't know the Ikarus USB Flight controller. So if you have a picture of your controller, let me see it. I guess, that there is no on/off button on the controller, but how i said, i don't know this controller.

Wolfgang

Hy
So if you use a normal Transmitter it's no problem to set D/R on the transmitter. in my turnigy 9x i programmed a clean plane modell and used my switches on the transmitter as shown in the pictures. in this case the elevator switch, which set D/R on or off. on set off i have full way of the elevator, if i turn it on - the way will be reduces to 60%.

Using D/R with the USB Icarus Flight controller you have to go to the controller setup in the programm. Use setting "Expert" or "advanced setup" (i don't know which is the right termination in the English menu).
on the top you will see a D/R area. choose from the dropdown field "keyboard" an than on the button right beside choose a button from the keyboard, you will take for D/R. in my case at the picture it's the button "Q".
now you have to set up your rates. on the right hand of the setupmenu you will see the entries for "Rate".
to set yor rates you have to turn on first the Dualrate button by pressing your assigend Button on the keyboard. You will now see, that the D/R is on. So now you kann set your rates for each channel on the right to your prefered value.
After that you can test it, by pressing your D/R button. the values should change from 100% to your given number. That's it.

Wolfgang

Hy
I'm happy to hear this. sometimes it is better to do things twice. And i always use the advanced controller-setup, to see which channel is known correct. have fun with the sim.

Wolfgang

Quote from RobGWH

Thanks I know have a connection to the software the next problem is the software is not seeing the throttle stick at all. The throttle is being controlled by on of the three position switches? Can't seem to find a solution to that?

why this? Screenshot of this? what are you using in the transmitter a clean model without any mixers? try to setup a clean model without mixers and try it again.

Wolfgang

Hy
here is the manual: http://www.ikarus.net/downloads/manu…-ikarus-usa.pdf
see point 2.4 at the manual.
If you use a spectrum satellite you should choose "Mode 1" so that the purple LED is on. connect the satellite receiver with the rc-sim-connector wih the patch cable and it should work.

Wolfgang

Maybe another solution: http://rc.runryder.com/helicopter/t405467p1/
or there: http://www.rcuniverse.com/forum/ikarus-a…utaba-18mz.html
(from Post Nr. 6: "The trainer port output is in PPM mode when the trainer mode is disabled. If the trainer mode is activated, the signal from the trainer port is not compatible with the usb interface."

Wolfgang

Did you done the menu as shown in the pictures?

Wolfgang

Don't understand your post.
the sticks do only move to the + direction? in which menu? at the calibration menu of RC7 or in the menu, were you can assign the channels? so you have to calibrate your transmitter before assignig channels. did you do this? so if you did this, check in your operating system, if it had recognized your transmitter or try to calibrate your transmitter in the os.
some more information could be helpful.

Wolfgang

Hy

maybe you look there - http://www.ikarus.net/en/meine-spekt…s-kann-ich-tun/
and there: https://www.aeroflyrc.com/aerofly_rc_7_input_devices.html

Wolfgang

This Adapter will help you: https://shop.ikarus.net/de/aerofly-ada…eckstecker.html

Wolfgang

Hallo

Ja. zB. die Zivko Edge ist standardmäig dabei. Und beim Niko Fräulin (bamlach) gibt es unter Aerofly 5 Modellen noch den RT Super Sirrius, der auch im RC7 läuft.
aerofly.com/community/index.php?attachment/4469/
Wolfgang
PS: für den alten Aeorfly Professional Deluxe gibt's auf RC Sim einige Modelle dieser Klasse.

Hy

I am glad that I could help you

Wolfgang

Hy

I think the E-Charter from Robbe (see this post: http://www.ipacs.de/forum/showthread.php/6539-Robbe-Charter) has the same characteristics as the e-flite apprentice. So you download the model, follow the instructions, how to install separat models (see post in this Forum - http://www.ipacs.de/forum/showthre…n-User-Modellen) and it's done.

Wolfgang

Hallo Peter

Also. Ich würde mal schauen, ob dein schwarzer USB Adapter im Mac Book erkannt wird. Sollte es sich dabei um so was ähnliches wie ein USB Interface handeln? Foto hier wäre eventuell hilfreich, eventuell Aufschriften auf dem USB Adapter vorhanden. Wenn ja, würde ich meinen, dann brauchst Du nur den 31036 Adapter von Ikarus aus dem Shop. Der legt das Stereosignal vom USB Interface Kabel auf einen 3.5 mm Mono-Klinenstecker bzw. einen eckigen Stecker (6 PIN) für Futaba Anlagen (daher wäre auch ein Foto von deinem Traineranschluß hilfreich)
Ansonsten stehen die Anforderungen hier.

Wolfgang

any news? did you fix it?

Wolfgang

Hy

I've packed your 3 Copters to a rar-file. So you can download it here:
https://drive.google.com/open?id=0BxbrK…a0o1ZVlhUk5MT2s
hope it works.

Wolfgang

Hy
Have you looked there: http://www.ipacs.de/forum/showthre…he-Spektrum-DX7

and maybe this one: http://www.ikarus.net/en/meine-spekt…s-kann-ich-tun/

Hallo Leute

Offenbar bin ich irgendwie zu blöd um das richtige Ergebnis zu finden. Vielleicht kann mir ja wer weiterhelfen.
Habe heute von Windows 7 Ultimate auf Windows 10 upgegradet. RC 7 Aktivierung verlief erfolgreich, der Sim läuft auch unter Win 10 problemlos. Lediglich die unter Window 7 vorhandenen eigenen Modelle sind im Sim nicht mehr aufrufbar.
Also habe ich im meinem Benutzerordner unter "Dokumente" nachgesehen - dort ist der aerofly RC 7 Ordner mit allen Modellen vorhanden. Wahrscheinlich liegt es daher nur an einer kleinen Einstellung.
Ich hoffe, es kann mir wer weiterhelfen.

Wolfgang

PS: hat sich erledigt. Nach einem 2. Start des Sim war auch der Ordner "Eigene Modelle" im Menü "Modell laden" wieder da. Alles funzt.

do you have the right connections? the mono plug of your adapter cable has to go in to the DX6i, the stereo socket has to be connected with the interface cable.
in your DX6i select a clean model, no mixers, than calibrate your usb dummy interface under your OS with the connected transmitter, so you will see, how much channels are working. after calibrating your usb dummy interface, you have to calibrate it unter aeorfly and than assign the channels to the right sticks. that's it.