online
And I reached 25% of the projected area.
online
And I reached 25% of the projected area.
Have you tried setting absolute height values?
You can merge models in tools like gmax and others. Then convert it with modelconverter. Of cause it depends on what cars you have available in the 3d model designers...
It is worth to do one model for the parkdeck including the cars? This would be one object in the tsc file. I can not prove it yet, but it should be also better for frame rates.
Region Chotěboř is online.
Cool, thank you. Theo and his father Rolf Hankers.
D-EKKY Laser and D-EFFI RV-4 (the plane taking the photo)
Xtreme Air XA-41... Su 26 3M... CAP 232...
I fly a couple of times as a passenger, but I never heard applause… and if I remember well, a pilot told me, you don't hear that in the cockpit if there IS applause.
A welcome from the tower comes with ATC. If it comes somewhere in the future.
well, that is the way it is. Not your fault.
If you use my Bavarian Cultivation addon you het already around 400 airfields in this area. Good luck looking gor ghe duplicates.
GB is no indicator of quality. There are areas, where the Level 14 Images are not really worth the download. But you can go low everywhere you like.
oh shit. Now my cultivation tool is not working with your grids anymore because you changed the BoundingBox format.
Need to change my code now. Well, weekend.
Moravska Trebova is online. I put the high res files in a separate zip but in the same Download post. So don't look for a second entry.
I've done similar stuff long time before, converting P3D afcad data into AFFS2. I would not include it since it lengthen the loading time a lot.
This only makes sense for designers as a starting point, that is why I didn't publish it.
After the Comoros Islands to learn about scenery design, this is my second … big project. I try to cover the whole Czech Republic from elevation, ortho, cultivation to airports and whatever I am allowed to use. There are a couple of reasons why I was choosing this area: The possibility that one of the big players, like Aerosoft or ORBX, covers this area is not so high. Also the freeware in the other sims are really huge and the chance to get the allowance to convert a lot of this stuff is quiet high. And... the country is really aerobatic biased, and you know my preferences in simulation.
At the moment I am still develop the base scenery, approximately 47% are covered right now with elevation, ortho and cultivation. These areas are already available for download on flight-sim.org. The complete area will cover around 115.500 km².
If someone want to join this project, he or she is welcome, especially in the area of creating/converting airports or creating landmarks, just send me a pm.
Downloadlist:
Area Prague:
Czech Republic - Region Prague
Optional:
Czech Republic - Region Prague LOD14 Part 1
Czech Republic - Region Prague LOD14 Part 2
Area Brno:
Optional:
Czech Republic - Region Brno LOD14 Part 1
Czech Republic - Region Brno LOD14 Part 2
Czech Republic - Region Brno LOD14 Part 3
Area Ostrava (West):
Czech Republic - Region Ostrava (West)
Optional:
Czech Republic - Region Ostrava (West) LOD 14 Part 1
Czech Republic - Region Ostrava (West) LOD 14 Part 2
Area Pardubice:
Czech Republic - Region Pardubice
Optional:
Czech Republic - Region Pardubice LOD 14 Part 1
Czech Republic - Region Pardubice LOD 14 Part 2
Area Karlovy Vary:
Czech Republic - Region Karlovy Vary
Optional:
Czech Republic - Region Karlovy Vary LOD 14 Part 1
Czech Republic - Region Karlovy Vary LOD 14 Part 2
Czech Republic - Region Karlovy Vary LOD 14 Part 3
Area Ceske Budejovice:
Czech Republic - Region Ceske Budejovice
Optional:
Czech Republic - Region Ceske Budejovice LOD 14 Part 1
Czech Republic - Region Ceske Budejovice LOD 14 Part 2
Czech Republic - Region Ceske Budejovice LOD 14 Part 3
Area Rakovnik:
Czech Republic - Region Rakovnik
Optional:
Czech Republic - Region Rakovnik LOD 14 Part 1
Czech Republic - Region Rakovnik LOD 14 Part 2
Czech Republic - Region Rakovnik LOD 14 Part 3
Area Kolin:
Optional:
Czech Republic - Region Kolin LOD 14 Part 1
Czech Republic - Region Kolin LOD 14 Part 2
Czech Republic - Region Kolin LOD 14 Part 3
Area Olomouc:
Czech Republic - Region Olomouc
Optional:
Czech Republic - Region Olomouc LOD 14
Area Moravska Trebova
Czech Republic - Region Moravska Trebova
Area Chotebor
Czech Republic - Region Chotebor
Area Vlasim
Czech Republic - Region Vlasim
Area Benesov
Czech Republic - Region Benesov
Area Horovice
Czech Republic - Region Horovice
Area Hodonin
Czech Republic - Region Hodonin
Area Mikulov
Czech Republic - Region Mikulov
Area Bechyne
Czech Republic - Region Bechyne
Area Plsen
Area Straconice
Czech Republic - Region Straconice
Area Jindrichuv Hradec
Czech Republic - Region Jindrichuv Hradec
Area Jihlava
Czech Republic - Region Jihlava
Area Prostejov
Czech Republic - Region Prostejov
Test flight around Prague:
Almost…
The FS 2 Extra is used heavily in my case.
A tubular frame splits energy load and depending on the structure you can implement redundancy this way.
But carbon frames are the future. It is just lighter than steal. And weight reduction is everything in an aerobatic plane.
Xtreme Air was the first in aerobatics doing this and I got to sit in both planes. The XA had much more space. So Extra will be the same now.
Without the source bitmaps no chance, I would expect. You could try to reconstruct the whole texture where the cockpit is drawn on, but this is a nightmare.
sure, mesh compilation. And cultivation. Would be interesting to know, if the airport is covered in cultivation and if it is landable.