Ist RC7 wirklich in
C:\Program Files (x86)\aerofly RC 7
Wenn ja, Support anfragen.
Gruss Jürgen
Posts by Jürgen N.
-
-
Sorry for interfering...
I guess that this is a real "Power On/Off" switch.
Just watch the "Channel Setup" in the simulator!
Does it still work correctly in the "Off"-position? I don't think so.
Or does a channel move when toggling it? Then you can use it for the retract or so.
Regards Jürgen -
Its quite normal using "Vertical Sync" in graphics setting.
-
-
If you have a running AF 5 you have all to run RC7.
There is no upgrade but different versions. -
Glad to hear so.
Obviously your interface can handle just 8
"PWM"
channels.
This is not uncommon but should be mentioned in the operating instructions.
In antiquity of RC this was a limit which could not passed over without some tricks.
But now we have 2017...
Kind regards from Switzerland
Jürgen -
Sorry that despite the fact I have no idea about Apple, I humbly try to help:
what are servos doing if you use a receiver instead of the interface?
Do they really have the full throw to both sides?
If yes, the problem is definitively in the area of calibration.
Either in the interface or in the simulator. Do you really have the latest version of RC7?
Regards from Switzerland
Jürgen -
Does "Steam" handle edited models different than ordinary RC7?
Does Steam RC7 offer different models than ordinary RC?
Regards Jürgen -
What the heck did you do and how?
If you use the original editor the original models are not touched and remain in the original file.
Btw I can not find these models in my originals. -
Die Hoffnung stirbt zuletzt...
Gruss Jürgen -
Obviously its time to say good bye RC7 :confused::(
-
Das bestärkt mich in der Vermutung dass niemand von IPACS oder IKARUS hier mitliest...:mad::confused:
Gruss Jürgen -
Also darf weder der "Benutzer(Michael.....)"
noch "Ersteller-Besitzer.." Ändern oder Schreiben? :confused:
Wie soll das funktionieren? Hat das jemals funktioniert? Wenn ja, kannst du das System zu diesem Wiederherstellungspunkt zurücksetzen?
Sorry, ich bin überfordert...
Gruss Jürgen -
OK, man spricht Deutsch...
Also, du sprichst von RC7, nicht 5?
Zuerst würde ich unbedingt den Support einschalten!
Bis dann versuche ich mal so gut wie möglich zu helfen:
Auch ich musste mich nach dem Win Update neu registrieren!
Aber: in Hilfe -> "neu registrieren" erscheint trotzdem die Meldung, dass RC7 nicht registriert sei.
Komisch. Ich würde es trotzdem nochmals versuchen.
Dann: erscheinen nicht alle Modelle oder kannst du sie nur nicht laden? Fehlermeldung hierzu?
Dann: dass du kein Log hast, kann mit der Zugriffs-Berechtigung zusammenhängen.
Hat da etwas geändert? Bist du allein auf dem PC? Schau einmal nach in "Dokumente"- "Eigenschaften"
Vie Glück!
Gruss Jürgen -
Quote
of my Aerofly5
I think this is a typo.
Anyway, IMHO this forum obviously is not inspected to often by IPACS :mad:
So I suggest to report your problem to
http://www.aeroflyrc.com/aerofly_rc_7_support.php
Btw: which operating system is involved?
Regards Jürgen -
It is true that RC 7 needs to by registered again when the system is changed from W7 or 8 to W10.
And again when W10 is updated with Anniversary Update.
So I lost already 2 possibilities of 3 for nothing.:mad:
IPACS or IKARUS, please correct this inconsistency!!
Kind regards
Jürgen -
Quote
Suggestions?
IMHO
IPACS has a support:
http://www.aeroflyrc.com/aerofly_rc_7_support.php -
Is it not possible to update the normal way?
http://www.aeroflyrc.com/aerofly_rc_7_download.html -
-
I noted this message too.
But it appears in all my logs! And no problems.Quote1.24-tmmodeleditor: initializing trackir...
1.24-tmmodeleditor: (DLL Location key not present) TrackIR dll not found.
Strange IMHO is that the crash appears after:
2.04-tmmodeleditor: no input devices found
Even without an input device, it should load the scenery.
Could the scenery be the reason for crashing. :confused:
A case for IPACS support, isn' it?