Wurde bei diesem Modell absichtlich das Servo für die Schleppklinke "vergessen" :confused:
Im AF 5 ist sie vorhanden!
Gruss Jürgen
Posts by Jürgen N.
-
-
Sehe ich das richtig, dass F-Schlepp 2 Piloten braucht?
Ist zwar realistisch, aber gegenüber AF5 ein Rückschritt für "Singles".
Gruss Jürgen -
Hast du auch "SUMO" auf Kanal 8 des Empfängers geschaltet?
Sonst passiert wirklich nichts.
Handbuch Kapitel "Telemetrie".
Gruss Jürgen -
Bitte, wo finde ich weitere Informationen, rsp. eine Art "Handbuch" über RC7?
Fehlt das bei der Update-Ausführung?
Wo finde ich "Info 15.9"??
Mit Dank und Gruss
Jürgen -
Do you really use a "4D" landscape?
This is prerequisite.
Regards Jürgen -
RC7 does not need a dongle. Just an ordinary interface.
It depends on which other Sim you like to operate. If AFPD or AF5, you still need the dongle.
Regards Jürgen -
I am pretty sure that you will not need an other cable.
Ikarus does not require a special interface and also I have a rather old one.
Kind regards Jürgen -
Wenn MPX funktioniert und Graupner nicht, ist das ein Zeichen dass du einen "Stereo-Mono" Adapter brauchst.
Oder selber lötest.
Gruss Jürgen -
I doubt that this is an RC7 problem.
Trim control is fully done in the transmitter.
To check, go to:
Controller - Assign Controls (Advanced)
watch e.g. "Rudder"
activate the stick, movement correct? 100% ? Centred?
If not, calibration will help.
Activate trim only.
Does the centre shift? If yes, all is correct. If not, the problem is the transmitter.
Regards Jürgen -
OK, ich bin ja froh dass ich mir das alles nicht nur einbilde...
Ich kann ja editieren, habe ja Zeit (Rentner ).
Aber: was ist mit Otto Normalverbraucher?
Eine positive Werbung ist das bestimmt nicht. IMHO
Gruss Jürgen -
Bitte an "Seglerpiloten":
was haltet ihr von den neuen "Flugeigenschaften" der Segler?
Während es im AF5 kaum möglich war, einen Segler zum "abschmieren" zu bringen, ist das nun im RC7 meiner Meinung nach viel zu leicht.
Mit "Quer" in einer Kurve etwas zu lange gegeben, gerät das Modell in einen Spiralsturz aus dem es kaum mehr abgefangen werden kann. Egal ob mit wenig, viel oder gar keine "Seite".
Bitte ladet einmal "Schalmi" und den original Pilatus B4 (PC11).
Oder die Foka4.
Fliegt gleich nach rechts und macht eine Linkskurve am Ende des Hanges. Wenn nicht "ganz fein" gesteuert wird, schmiert das Modell fast unhaltbar ab.
Es liegt nicht am Modell! Die genau gleichen Einstellungen im AF5 (Profil, EWD, SP) ergeben "lammfromme" Modelle.
Ich bilde mir auch ein (?) dass es in anderen Szenen (z.B. Wöllaner Nock) besser ist (?).
Es fällt mir auch auf, dass original die Modelle kaum EWD haben und sehr schnell fliegen.
Bewusst?
Etwas verbessern kann man, indem an der Fächenaussenseite das Profil "Clark Y" gegeben wird. Aber das ist wohl nicht der Sinn der Sache.
Bin sehr gespannt, ob ich der Einzige mit dieser Meinung bin.
Schöne Festtage noch!
Gruss Jürgen -
Please let me know your results...
Regards Jürgen -
Eine "HoTT" Interface hat Ikarus nicht.
Nur eine welche auch mit HoTT funktioniert. Problemlos...
Und wie unten im System erscheint.
Gruss Jürgen -
Small question:
how can have we the BMP files of all models ?
since it is not possible to extract the ttx files
Thank you.It is not possible to convert the ttx files back.
Me too is searching for an instruction how to repaint a model.
Once upon a time there was long discussion about this theme:
http://www.ipacs.de/forum/showthread.php/5312-Bilddatei
But i doubt that it is useful for you.Hoping for a better answer from officials...
Regards Jürgen -
Sven,
danke! Habe eben unter RC 7 gesucht...
Als nächstes werde ich den Rauch an Seglern zu übernehmen versuchen. Bin optimistisch da offensichtlich die .tmd und .tmc Dateien von AF 5 1:1 übernommen wurden. Samt allen "Kinderkrankheiten" wie " keine Bodenreibung" und Foka 4 "Handstart". :o
Gruss Jürgen -
Arthur,
please excuse my ignorance, but:
where is the instruction from IPACS you mentioned before to be found?
Regards JürgenWir können auch Deutsch miteinander sprechen...:)
-
Thank you!
Probably there are different ways to get the same result.
I did not load colours from the "download" (yet). I did them myself in AF 5 with the instructions from early time.
And the result works fine. Now also in RC 7.
E.g. my Prolution4004.
Regards Jürgen -
Arthur,
sorry, I can not open your attachments (invalid ....)
No, finally I did nothing else than to shift the AF 5 colours into corresponding RC 7 airplane.
Regards Jürgen -
One must not just copy the full plane with multi-colours from AF 5 to RC 7!
One must copy only the colour file(s) from AF 5 model into the RC 7 model airplane file!
Kind regards Jürgen -
Could it be that there is a problem also with repainted planes?
I repainted the Alpina 4001 and the Prolution.
They are shown correctly, but will not be loaded. A small motor plane appears instead.
Regards Jürgen