Posts by uli057

    Hi Michael,

    Openstreetmap is the next there i look... and at Marine Navigation we go with Openstreetmap and Esri.

    i Have a boat and there we look at our Maps in the Screen with that.

    Or we pay for Navionics, there are a lot of Deep Source at Sea, and more detail.

    But for VFR Flight we dont need big details on ground...thats only for a little orientation at 5000 Feet.


    I Take a look there....

    Hope i can find a solution for us.


    Regards

    Mhhh...

    I understand, the old problem of the releases...

    Maybe there is somebody who knows in addition something juridical?

    If one cannot deliver it as a Freeware, I get no money for it... then I cannot make available it to all, of course.


    Why must this be always thus complicated?:(

    Why we must always make everything twice... everybody has for itself always anew, although it somebody quite ready there lie.:(


    Let us hope that i can my work for all ....as Freeware downloadable in future ?!?!? i dont no !


    Regards

    ULI

    Tip for Lenid...


    when you use a Picture with Alpha Channel you must set in Geoconverter the point "create Mask", in FSET no create mask!

    The Alphachannel is then in a new generated Picture as xxx.tif no compressing when you save.

    When you dont use Mask you see at Aeroflight no Groundpicture with his Alphachannel....


    For Level 9 at Aeroflight you set the Resolution at FSET to 4.

    In geoconvert set the Level 9 and 10 for this Resolution.


    For Level 13 in Aeroflight you set the Resolution at FSET to 0.

    In Geoconvert set the Level to 12 or 13 for this Resolution.


    And ...important at geoconvert...with Alpha Pictures ...."create Mask".... without Aplha Chanel no create mask.



    Regards

    Hi Lenidcamper and Michael.

    Lenidcamper....

    Please see the atached picture for what i generated.

    You see the Level 9 tiles, and you see the Level 11 Tiles for Austria.

    Level 11 Tiles for austria is why the LOWI Scenery is made on Ground with Level 11.

    When you make your own scenery ...it is okay,

    Or, you orientate at my Bounderies for the rest from your own Scenery for Italian and so on.

    Make only for Airports and points of interssting the Level 13 Tiles....not completed for all.

    For fly over Ground at Flylevel 5000Feet it is enough with Level 9-10.


    maybe we can use in future together the Scenery... then fits everything. At the moment we may put nothing online....


    Ch Pay Scenery is at Level 13 compiled.

    Lowi Pay Scenery is compiled at Level 11.


    Michael...what you mean with "I am afraid you can't redistribute it, can you?"

    when i ready with Germany i bring this as free at Server for all....


    Regards ULI


    Hi...

    The excel sheet i look forward and work with... THX !!


    "Vogel69"

    That what you present with Vid have i made, but you copy tile for tile at FSET.

    I have the goggle N/W Tile copy coordinates in FSET and i have copy from Google the S/E coordinates to FSET.

    The Tiles are also show, but for copy (manual insert 2 Point) i must calculate in Aero/FSET Coordinates new.

    And there is diffrent for coordinates between google and FSET.... a little bit diffrent.

    i must after 50°. xxxxxxx all numbers set... for right calculate in example " N50° 26 24.55" at FSET


    i am learn and i learn more when i tested self....than i understand this Aero tiles...;)


    but many thx for all that help here in this forum !!!!:):thumbup:

    Regards

    uli

    Hi ..

    The mask dont covered the partielly scenery tiles....the overlapping exist to.

    Aero has his own tiles...and at Startpoint in Aero we can see....zoom in... the tile borders from aero. But this, dont help in FSET.

    When generated with FSET we have the Probs with overlapping tiles every time.

    Only a chancewe have, is, that made a big Ground tile (cpl- Germany) at Detail 4 and compile with max Level 9-10.

    After this, compile the next tiles for better view a small tile ( Airport) at Detail 0 and Level 13-14, only one.


    That goes...but when you want more tiles after the first procedur.... the same Problems with overlapping tiles comes true.;(


    FSET is not specialy for AeroFS2...;)

    We can work with this, but it is very ticky...


    I wish and hope that we become a Tile Tool that bring us the correct Tile coordinates for Aero FS....8)


    Regards

    hi boxcar

    This airport shows the same as Paro in Buthan....

    But i cant make the Airport Ground textures at Paro.... the sattelit Picture very bad from there.


    The Airport in Buthan can only 8 Pilots fly in the world....it is very dangerus...


    greetings;)

    Hi,

    Thx for that tool.:thumbup::thumbup::thumbup::thumbup:

    I haved tested and i see there diffrent boundies between Google earth and FSET.

    Or...Geo coordinates calculate the coordinates not correctly.

    I see more at future...test go on.;)


    Regards

    ULI

    hi,

    wieviel BGl Dateien willste haben für Airports ZB. "Sevenrow" alle Ostfriesischen Inseln ?

    Die Scenery war von mir aus dem FSX plus ...Sylt...

    Texturen gibts dazu...;)

    Gibt noch mehr...habe noch alles :)


    Im Screenshot Ordner gibts schon mal die Ansicht von den Ostfris. Inseln per Ground Textur im AFS2

    Ich kompiliere die Ground nur noch im Detail 4 mit Level 9 und 10.

    Klappt prima braucht wenig Platz und reicht fürs überfliegen nach VFR.


    Gruss ULi

    okay in Deutsch...smile...


    Wenn ich ein Gebiet von der Größe 50NM mal 50NM mit dem Geotool generieren lasse, dann nehme ich zwischendurch

    aus dem Verzeichniss die generierten Dateien heraus und speichere diese direkt im Scenery Ordner ab.

    Hier die ttc Files.

    Nach einer Weile mach ich das wieder.

    Nur das dann Windows sagt, das diese ttc Files schon existieren würden im Scenery Ordner !

    Ich mach das ...wegen der Größe der Dateien...nur um beim hin und her kopieren später, schneller zu sein.

    Alles auf einmal kopieren ist ja schon ne Menge bei 50NM mal 50NM.


    In soweit auch wirklich wahr, kann ja die vorhandene ttc Datei belassen und die neue wird mit neuem Namen rein kopiert.

    Somit existieren dann zwei identische ttc Files im Scenery Ordner, nur das Sie unterschidelich bennant wurden.

    Beispiel: Map13_58228_aa3.ttc und der zweite dann Map13_58228_aa3(2).ttc


    Kommt jetzt Windows nicht mit den ttc Files klar, weil Win meint es wären Schriftdateien?

    Oder ist das ne fälschliche Meldung von Win ?

    Denn, egal ob ich alles generieren lasse, von 9-13 oder nur die 13ener Level, die anzahl zB. für Level 13 bleibt gleich. 1260 Dateien.


    Des weiteren, wieso macht GEO Tool eigentlich die BMP Files doppelt ?

    Da schreibt das Tool die BMP Files vom FSET Tool gleich nochmal in sein eigenes Verzeichniss obwohl die bei FSEt doch schon vorhanden.

    Was für eine Platzverschwendung !

    Und die BMP Files sind absolut identisch..... und genau die brauchen unheimlich viel Platz auf der Platte.

    Und dann belegt Geo auch noch den kpl. Ram hier 16 GB vom System.

    Kann man das irgendwie begrenzen?!?!


    Gruss

    ULI

    Hi,

    maybe a little bit unclearly.

    Once again, I make an area in the size of 50 nm sometimes to 50 nm.

    If we call it because of me area "A".

    This area is generated for the single Layer 9-13 in the agreed folder.

    So that, however, this folder runs not too much completely, I take occasionally provided ttc files in the Scenery folder.

    After a while I take the anew provided files in the Scenery folder again. And now the announcement comes itself in the Scenery folder same ttc files consider already.

    This assertion of the system is also true there I this has checked.

    The countertest is: I left only the files for Layer 13 without making the folder occasionally empty, and funny manner the number same is like before with the copy announcement.

    Is this Win 10 bugs, especially Win 10 means it would be written files?

    Or is the message from Win 10 when i copied ....a wrong message that was not right there?


    Regards

    ULI

    Hi,

    this have i done so.

    But when i copied the next generated files to the other folder...comes the message that there the same named files exist.


    And i have controlled this.

    i copied and let renamed the copied file with win. Then i see map13_8520_aa58.ttc and map13_8520_aa58 (2).ttc at the new folder,

    and the files has same size.

    Only diffrent day and and clock attributes.


    Regards

    ULI

    Hi all.

    next confused.... or not.


    when i compiled a big Map. 50NM to 50 nm.

    Geoconvert tool works fine, but i see when i copy the new generated ttc files to the scenery folder there are the message that there was the same file.

    example. " map13_8520_aa58.ttc"

    the first was generated at 03.35 a Clock the new one was generated at 14.50 a clock.

    Make geoconvert the files new when i cut and copy the maked files to another folder?


    geoconvert works for this big area 3 days.....:S


    Or what is this?:/

    Regards

    Uli