Nope, but two things are new (or I just noticed):
I. (part of a route was active) after I clicked on the airplane symbol for the current position, I was shown a small region around KSFO. When I deleted the route it didn't work anymore.
II. only european airports are shown to me
I just installed the new update ...
So far I haven't found this bug in the forum so far, if this bug is known excuse me
Hello everyone, I found a small bug: I cannot make a route between KSFO and KDEN with the CDU of the B777. If I want to make a route between KSFO and KDEN at step "RTE" (https://www.aerofly.com/dokuwi…aircraft:boeing_777-300er) nothing happens. But if I type in KLAX or KLAS instead of KDEN, a route is created. It would be nice if you could fix that.
Hello, i have found some bugs:
1)
App crashes around the region of LSGG
2)
graphic bug at EGEC (picture)
3)
weird approach at EGGP
Cya
You can fly with running out of fuel in Aerofly. You'll just have an error message...
[EDIT] by curiousity I made a F-PLN from Denver to Miami, dear Jet-Pack (IPACS) I really miss to know the distance when I'm planning the flight
I know that I can fly with 0kg. But it really bothers me when I use a simulator and fly with no fuel. What's the point of a simulator if I'm doing something pretty unrealistic?
By the way: You can see the distances between airports here: http://www.airnav.com/
When you have selected an airport, you can measure the distances to other airports in the right column
rsx30 great idea!
I know my name says something, but tbh, I also like the A320 Family. I am really impressed with how well the A320 is programmed. I try to play realistically myself and I want to fly from Denver to Florida without running out of fuel :).
Hello, can the amount of fuel in the A320 be increased to its maximum capacity? 2h flight time is too short.
The time is not unrealistic. The Rwy of KSQL is 2600m long. The minimum runway length for the B777-300 is 1900m. if you compare the landing with the airport diagram (https://www.airnav.com/airport/KSQL) you can see that the landing from the length is realistic. Please inform yourself about this next time, it only took me a few minutes to find out, that the landing is realistic
Hello,
Are there airports that also have night lighting since the new update? (Apart from KDEN, KTEX and KASE).
Does anyone know btw how i can see the EFOB value in the A320?
Thanks in advance
Case 1:
KTUS-LSZH
DEP BURRO3
ARR BLM2G
APP I16
Case 2:
LSZH-KPHX
DEP WIL2Q
ARR MAIER5
APP I07L
Case 3:
KSDL-KPHX
DEP SCOT7
APP I07R
Hello everybody,
first of all I would like to thank you for the new update. The system depth on the A320 is really impressive.
Unfortunately, the update caused a few bugs with the autopilot. The following happened to me:
Case 1: I want to fly from Arizona to Zurich. Except for the departures and approaches, I didn't make any extra waypoints. Anyway, I started normally until about Kansas / Nebraska. The autopilot flew strange circles and was not on the route. I tried to make a new route, unfortunately nothing worked. Then I wanted to fly back to KDEN and the autopilot worked perfectly again.
I found out that you have to do a waypoint every 500-1000nm without making circles.
Case 2: When approaching KPHX with an A380, the autopilot became very strange. 5nm in front of the runway the aircraft steered uncontrollably to the left and down. Calibrating and new routes did not help.
Case 3: I want to fly from KSDL to KPHX and use the departure SCOT7 and the approach I07R. After I flew the last waypoint from departure, the autopilot simply flew north and went down. I only noticed what was happening at KPRC.
If this has already been discussed somewhere in the forum, then I apologize.
Another question: Does anyone know how I can activate / see the EFOB display in the A320?
Cya
Hello, can someone tell me which airports have night taxi way lighting? So far I only know about KDEN and KTEX.
Thanks in advance for the answers
