But what's the need to start both motors simultaneously? I myself only start one motor at a time and have never had any problems doing so.
Reality
Posts by Raptor1903
-
-
I've never seen that done before 🤷 Why would you want or need to start the motors simultaneously? Okay, it's possible with a 5S delay , but it's probably not how it's done.I don't think it's a priority in the simulation; cold and dark works fine.
This method is used even in real operations.
-
On my 787-9 Dreamliner, when starting both engines simultaneously, the aircraft loses power. This problem didn't exist on the 787-10.
-
Now that the 777X design is complete, i think it would be a great idea to make one for Aerofly, what do you think?
I would love it!
It is my favorite plane, too. I would love to see it, but the model must first start commercial flights and full deliveries must begin. Information about the plane is limited.
-
Hello dear ipacs team, today I opened this topic to find out if it is possible to add starting points at certain points for cold and dark starting in 2D airports. Cold and dark flights cannot be made from ports such as Doha, Abu Dhabi etc. Will there be a study for this? Good day.
-
The time skip jump is always about 1/10th of the total distance. So for long distance flights the jumps are very long and for short flights they are quite short.
But the time skip only jumps to a position on the route. So if the route altitude is messed up for some reason this might explain why you end up below ground. But I have not yet been able to replicate this, normally this works without issue.
I've mentioned this a lot and I don't want to bother you, but shouldn't the time skip feature be under our control or leave it somewhere near the TOD point? As you said, it goes fast on long-haul flights, and when I use the feature towards the end, it takes me straight to the landing. This issue is very important to me.
-
Wow this is the first time I see a Turkish here of course you can reach me I think you can send a DM here
I wrote via dm
-
huh..weird maybe it's just like where you start up a 737 or something and the Master Caution warning illuminates. Correct me if i'm wrong.
we can say yes
-
On the A350-1000, this warning will sound when you turn on the battery and external power source.
What is this warning and is there a way to avoid this warning?
When we start the plane, this warning comes because the anti-ice and packs do not see power. It is not a problem, it is a natural warning. When the APU works, these warnings close, but you can also clear it.
-
Sorry for the late reply. While on the ground at Heathrow with the A350, I got 18 to 20 fps with high settings and 80% pixel with Vulkan. In the air, I saw 25 fps. Of course, when I was in the cockpit and the aircraft lights were off, but at 30 thousand feet I was approaching 30 fps, but on other aircraft, like the 737, I got 5 fps more than normal. By the way, my device has 8 GB physical RAM and 8 GB virtual RAM
Can I reach you my friend, I am Turkish too
-
Yes, I flew today too but this is the situation 😄
-
Strange. Thats never happened to me
What I mean by deleting is that my manual data from Simbrief, whether it be fuel weight values or performance page, is changing with the automatic data for 350.
-
Well it works for me . I skip time and place the plane on my route before T/D and I take it from there.
You are right but this solution does not work for me, thank you for your help my friend.
-
While flying on a planned route, go to menu and then location, drag the plane along the route and place it where you wanna continue. Once ready, start the flight and engage AP again. Very simple
This solution deletes everything I filled in FMS and everything I filled is gone, this is not a realistic solution
-
It is sad that I cannot get an answer from anyone, I am someone who loves long flights and I want to fly more with the A350, when I use time skip I make good progress, but I also skip the Top of Descent point and teleport directly to the final point. My suggestion is that dear producers, the time skip should be able to stop at the position we want, so that I can take control of the plane before reaching the top of descent point and finish my flight with a nice descent and landing, it would be nice to be honest. I do not know how the system in the game works, but thanks to this feature, the number of people using the simulation will increase. Thank you in advance, best regards.
-
Hello everyone, I have a question for you. I would like to hear your answer. How do you make long and ultra-long flights? If you use time skipe, can you please tell me the steps of how you use it, your ideas on this subject are valuable to me. Thank you.
I also want to ask how you get the Top of Descent point when you use time skip.
-
If you are aware of the problem, no problem, thank you for your answer, I will wait patiently for the problem to be solved.
-
Hello again, thank you to the team for the update. I have a question. I saw a problem with the time skip feature again. The altitude problem I mentioned last time has been fixed, but there is an increase in speed. What is causing this problem? Thanks, good forums.
-
This would be very nice to be able to choose a specific point on the time skip rather than pre-determined intervals. Sometimes I try to time skip to the start of descent but it ends up overshooting to final approach.
I conveyed this to Jetpack recently, I hope it will happen because this is very important, we will start making intercontinental flights when the a350k arrives.
-
Man, I've been looking forward to this plane for a long time. You have truly created a masterpiece. Thank you. Do not rush to add this plane to the game. I wish you luck.❤️❤️
