Posts by Manuel280300

Quote from Criticalairline

Hello Aerofly team,

First of all, thank you for your amazing simulator – I really enjoy using it. I just wanted to share some feedback regarding the scenery in Africa and the Middle East, especially around Dubai and nearby areas. Right now, those regions feel very underdeveloped: there’s mostly just flat-colored terrain without much detail or 3D objects, which really breaks the immersion.

Do you have any plans to improve the visual quality in these areas, similar to what we see in Europe or the U.S.? It would be great for those of us who enjoy flying in that part of the world.

Thanks in advance for your reply, and keep up the great work!

Best regards,

Critical

Display More

Yes they really need to work on Middle East and Africa. There’s no single 3D airport in Africa and it’s very bad not even Cairo or Johannesburg and for the Middle East there’s no Doha airport or Abu Dhabi these are major airports in the Middle East

Quote from admin

Please try with the current version which is v1.5.2.1

I just updated the beta version for IOS 1.5.2 and the city lights and 3D buildings don’t load faster anymore the last update 1.5.1 was working alright but it’s not anymore with the new update I use an iPhone 15 pro

Quote from Huffmann

I'm worried! Because I pay the simulator to enjoy it and point out the errors so that they are resolved, because this error was not in the previous update. This forum is for this, to answer questions, new ideas and error corrections. I don't know if this is so urgent for you, but for me it is

Please there has been an beta update version about it check the forum for the link to access the new beta update for the city light and 3D buildings

Quote from admin

Dear Aerofly FS User,

for iOS and Android we have published beta versions ( iOS 1.5.2 , Android 1.5.1.9 ) where we would like to get some performance numbers of various devices.

Anybody interested in helping us, please install the beta version on your device and set up Aerofly FS with these settings:

1. Pick aircraft A350
2. Use runway 01R at KSFO
3. Set pixel density in the graphic settings to 80%
4. If you see the option, set graphics quality to MEDIUM, HIGH and ULTRA ( all 3 numbers would be great ).
5. Enable 'Show frame rate'
6. Disable 'Limit frame rate'
7. Disable AI traffic and landmark display
8. Set time to UTC 12h and UTC 24h
9. Set the pilot view position inside the A350 and set your field of view to a maximum. Double tap to look straight ahead

Please wait around 1 minute sitting on the runway, then look at the FPS. We would be interested in the displayed FPS value.

As an example on our iPhone 15 Pro, we get the following numbers:

• Ultra quality: 26 FPS at UTC 12h and 42 FPS at UTC 24h
• High quality: 35 FPS at UTC 12h and 48 FPS at UTC 24h
• Medium quality: 40 FPS at UTC 12h and 60 FPS at UTC 24h

Please note, that we only need rough numbers and that the FPS can vary strongly on your device depending on device temperature and many other factors.

Please do not post any other topics or questions here.

Display More

These are my result

For RW01R UTC 12 I got 30-36fps

And for UTC 24 I got 49-60 fps

NB it wasn’t stable that’s why I gave range because it was just changing

iPhone 15 pro

Graphic density 80%

Quote from Flyish

Is that beta public or private?

I’m still having rendering issues with 1.5.1

Yes the issue it’s been solved I’m on iOS but I’m using the beta version for iOS and it’s working perfectly now

Quote from Josebakv

Hello! With the 1.5.2 beta on iOS, all the problems of distance objects rendering and lights at night have been fixed. Everything works fine, just like it was before de A350 update.. but with the A350 now! Good work!! (iPhone 14 pro max)

When I download the beta version I don’t get access to my purchases why

Quote from Gravitational lensing

A rough conclusion: I tested it with Android 15 and 12GB RAM, and due to the astonishingly large rendering area currently available, you can see buildings in the city of London from EGLL. I suspect this is caused by rendering a larger area at once, as the larger rendering area greatly reduces the frame rate during takeoff at complex airports like EGLL

In order to ensure smooth operation, there seem to be two options now: using a larger rendering area but requiring a decrease in building density, or reducing the rendering area to restore buildings with higher density. I prefer the latter

We haven’t had that update in IOS yet so I guess you should wait till we also test it to see if we also going to encounter the same issue

Quote from admin

The latest version 1.5.1 for iOS should have improved performance for many lower performance devices when using the A350 at night.

We also changed the loading distance for airports and buildings on some devices. However we will further investigate why some devices do not show lights properly in the distance.

Can you please post here if you notice a difference and if yes, please tell us what devices you have an what quality setting ( in case it's offered to you in the app, which is not the case on all devices ). Do not just post 'no change' or 'it doesn't work', please be specific or we can't help.

On iOS devices that offer you to set the quality we strongly discourage to use Ultra quality setting, please use at most HIGH for basically all devices. Also do not use 100% pixel density, 80% is recommended. All this helps to improve performance, reduce memory consumption and keep the overall simulation much smoother.

Okay it loads faster now but when you fly a little further away from it disappears ?

I use an iPhone 15 pro btw

Quote from admin

Dear Aerofly FS Users,

we have published a new beta version ( Version 1.5.1 ) to Apple that you can download here. In this update we fixed some broken airport buildings a rare pushback release crash and also the slow helicopter simulation. We would appreciate it, if you could give us feedback for this version specifically for the above three issues.

We also publish a new Android version ( Version 1.5.1.7 ) that also fixes the broken airport buildings and pushback issue. This version is already live for all customers.

The new update hasn’t changed the anything the night flying is still terrible and 3D buildings still don’t load properly anymore

Quote from FlyOverAsia

Update the Aerofly to v01.05.01.08. The problem is solved.

It hasn’t been solved

Quote from Jet-Pack (IPACS)

The available image quality depends on the region where you are flying. There sometimes is no better data available.

Please check that your global scenery subscription is still active as well and that you have a stable internet connection.

The scenery takes too much time to load up ever since the new update was released I use an iPhone 15 pro and I used to have all scenery and 3D buildings but after the update it doesn’t load anymore and it takes too much time to load sometimes even with a good internet connection I have an active global scenery subscription please we need it fixed thank you

The new update doesn’t allow the 3D buildings to load properly I use an iPhone 15 pro and it used to get detailed 3D buildings but it doesn’t load anymore and even if it’s load it takes too much time especially some airports you get closer before the airports loads up and it makes it difficult to land please Ipacs fix this issue thank you

Quote from Jet-Pack (IPACS)

That would be cool to have indeed.

What features are you looking for mostly?

Well we need simbrief integration and also something a little bit realistic like jet bridges and maybe loading of cargo but anyways great work with the A350 the game is too good 😊

Quote from A350dabest

"Sweet sweet victory!"

Yes it’s out now

Quote from A350dabest

I literally don't like apple anymore like this is big for us

Yes we have waited for months now that the thing is out Apple decides to also delay us

Quote from Hamza_i_07

The 777f took a fair bit of time before it came out for us too, actually so did the main sim.

How long did it take

Quote from Jet blast of A350 1000

Hopefully we can get it in like 2hrs or 5hrs from now, Apple is just a slow poke when it comes to approving app updates 😂😂😂😂😂

Honestly I’m getting sick and tired of App Store just release the f update

Quote from Jet-Pack (IPACS)

It's a known issue, thanks for reporting. We hope to fix this soon.

Well Ipacs I learnt there has been a new rework on the A380 saw it on one of Aerofly players on YouTube I want to know how true this is…Thank you

Quote from patrick_silva

Hello developers, here is a suggestion for improvement for aerofly Global on both platforms:

- the simulator is demanding a lot of battery usage

- improve the pushback control (it is almost impossible to use it to make turns to align the aircraft in taxi

NOTE: When I said that the simulator is demanding a lot of battery, I speak for myself.

Example: my cell phone is at 100% battery, after 10 minutes playing in the simulator, my cell phone is already at half battery, that is, 50% battery. My cell phone is new, it is not even 2 months old and has 5000 amps.

My smartphone model: Motorola Moto G 5g

Display More

Yes I use an iPhone and it drains a lot of battery my limit frame is off so I only play the game when I’m charging it at the same time