Roberteer posted the thread Crash on startup when 2 controllers are connected.
Hi all,
I noticed that Aerofly RC10 crashed on startup on a Mac M5 when two controllers are connected at the same time. I alternate transmitters between a Spektrum connected to a USB dongle and a Radiomaster Pocket bound to the Mac via bluetooth. When the USB dongle is left in the mac (not bound to the Spektrum transmitter) and the second transmitter is bound to the Mac via bluetooth, RC10 crashes on startup. In this case it would be great if RC10 showed an error message or allows to select…
Roberteer reacted with
to Jet-Pack (IPACS)’s post in the thread United Airlines A321XLR (N64321) Cockpit Reference Photos.
Roberteer replied to the thread Future Planes.
I would love to see a G1000 Version of the 172….
Roberteer reacted with
to jparia’s post in the thread Engine throttle curve adjustment.
Roberteer reacted with
to jparia’s post in the thread AVAILABLE ! Rasant Robbe.
Roberteer replied to the thread Ikarus USB Interface und Radiomaster Empfänger?.
Noch ein zusätzlicher Tipp, den ich lange nicht kannte: Wenn Du die BLE Joystick Funktion aktivierst erscheint ein neues Fenster im Sender...durch langes Drücken der RTN (return) taste verschwindet das Fenster und die Joystick Funktion bleibt trotzdem aktiviert - d.h. Du kannst dann ganz normal alle anderen Funktionen des Senders nutzen.
Roberteer reacted with
to burki’s post in the thread Ikarus USB Interface und Radiomaster Empfänger?.
Roberteer replied to the thread Ikarus USB Interface und Radiomaster Empfänger?.
Hi burki,
die konkrete Frage nach dem Ansteuern des Ikarus USB Interface über einen Radiomaster ELRS PWM Empfänger kann ich leider nicht beantworten. Wenn Du mit einem ELRS Sender den RC10 drahtlos ansteuern möchtest, funktioniert das bei mir bestens über Bluetooth ohne das USB Interface und einen Empfänger. Ich aktiviere im ELRS Menü meiner Radiomaster Pocket die BLE Joystick Funktion und kann den Sender danach ganz normal als Bluetooth Game Controller mit dem PC/Mac verbinden. Vielleicht ist…
Roberteer replied to the thread Runway Course in Route Planner.
Thank you, Jan! That might be a potential cause, maybe the deviation is not applied twice but in the wrong direction in the route planner:
Magnetic deviation for KSJC is 13° East.
True heading of 12R and 12L is 139°.
Magnetic heading should thus be 139° minus 13°=126° (subtract East when going from True to Magnetic)
Displayed CRS in the route planner is 153° which is close to 139°+13°.
Roberteer reacted with
to Jet-Pack (IPACS)’s post in the thread Runway Course in Route Planner.
Roberteer replied to the thread Runway Course in Route Planner.
Thank you, A330. Could you maybe help me and explain the difference between the course associated with the ILS/localizer in the nav. database and the runway heading? When do I use what? So far I always trained ILS landings in the C172 only with the ILS frequency and runway heading published on airport charts and that worked well :-)
Roberteer posted the thread Runway Course in Route Planner.
Hi all,
what does the CRS indication next to a ILS runway mean in the route planner? E.g. when I select KSJC (San Jose) as a destination in the route planner, I see a course (CRS) of 153° for 12R and 12L next to the ILS frequency in the route planner. The actual runway heading / approach course in airport charts is 126°. Similar for 30R and 30L, the route planner shows CRS 333°, the actual runway heading is 306°. On many other airports I checked, the CRS in route planner never really matches…
Roberteer reacted with
to jparia’s post in the thread AVAILABLE ! Breguet 280 T.
Roberteer posted the thread RC10 Mac Screen Dimming.
Hi,
when I run RC10 on the MacBook in battery mode, the screen dims / gets dark after a few minutes even though I am actively flying and the MacBook's game mode is enabled. The controller inputs do not prevent the MacBook from dimming the screen, only mouse or keyboard activity. Is there any way to prevent the MacBook from dimming the screen? Not sure if RC10 can trigger this or if it is a setting in MacOS.
EDIT: Seems this is also the case in other games / sims, e.g. Aerofly FS 4. I think…
Roberteer replied to the thread Bluetooth Controller Throttle Issue.
Thank you for the quick reply, I only observe it on Mac and have no Windows device to test. We can close the issue if the Mac driver is the cause.
Roberteer replied to the thread Heli set up Aerofly RC 10.
I decided to use my „real“ transmitters for the sim to make the sim feel as close as possible to real flying. E.g. I use a Spektrum NX7e connected wirelessly with a Spektrum WS2000 USB Dongle or through USB C cable as well as a Radiomaster Pocket that natively connects via Bluetooth. RC10 supports many different options.
Roberteer reacted with
to danielzhao0120’s post in the thread Suggestions for Enhancing A320 Realism and Training Features in Aerofly FS Global.
Roberteer posted the thread Bluetooth Controller Throttle Issue.
Hi IPACS team and forum members,
is anyone flying with a bluetooth controller? I noticed a strange behavior in RC10 when restarting the sim with a connected bluetooth controller, in my case a Radiomaster Pocket connected to my MacBook through the bluetooth joystick function of the ELRS module:
Steps to reproduce:
Bind and connect bluetooth controller to PC/Mac
Start RC10
Setup the controller in RC10 (calibration, mode, assignments etc.) as a transmitter (not joystick or gamepad)
Fly (all…
Roberteer posted the thread Quick Menu Issue.
Hi IPACS team,
first: thank you for the wonderful sim - I use it daily and purchased all expansion packs (happy to see more of them). I noticed a strange behavior in the quick menu on top of the screen:
Observed behavior:
Aerofly RC10 10.2.6 on Mac Book pro 14", M5, MacOS 26.6.1, purchased through Mac App Store.
When the mouse is moved, the quick menu appears on top of the screen. When one of the icons is activated / deactivated (e.g. tachometer, variometer), a green box appears around the…