User Tools

Site Tools


aircraft:airbus_a320

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
aircraft:airbus_a320 [2019/07/01 10:27]
jh
aircraft:airbus_a320 [2019/07/01 14:54] (current)
jh ↷ Page name changed from aircraft:airbus_a320_214 to aircraft:airbus_a320
Line 330: Line 330:
 We just experienced how easy it can be to fly an airliner with all the automation helping us. But we sort of skipped the whole procedures for setting up a flight plan with the on-board computers (MCDU), preparing the aircraft for takeoff and all the checklists and the powerful auto-flight (autopilot+auto-thrust) system. We just experienced how easy it can be to fly an airliner with all the automation helping us. But we sort of skipped the whole procedures for setting up a flight plan with the on-board computers (MCDU), preparing the aircraft for takeoff and all the checklists and the powerful auto-flight (autopilot+auto-thrust) system.
  
-==== A320 Autopilot ​Tutorial ​====+==== A320 Autopilot ​Introduction ​====
  
 The Airbus A320 autopilot in the Aerofly FS 2 is an realistic simulation of the real world autopilot. Therefor you can also refer to A320 autopilot videos, other descriptions or tutorials or the flight crew operating manual (FCOM) if you need to. We're going to provide an overview of what the autopilot buttons do. The Airbus A320 autopilot in the Aerofly FS 2 is an realistic simulation of the real world autopilot. Therefor you can also refer to A320 autopilot videos, other descriptions or tutorials or the flight crew operating manual (FCOM) if you need to. We're going to provide an overview of what the autopilot buttons do.
Line 465: Line 465:
  
  
-==== A320 MCDU Tutorial ​====+==== A320 MCDU Introduction ​====
  
 The Multipurpose Control and Display Unit (MCDU) is the interface to the flight management computer, which computes the flight plan. In this tutorial we're going to setup a flight plan from Sacramento Intl. (KSMF) to San Francisco Intl. (KSFO) similar to the beginner tutorial above. But this time we're only going to use the cockpit interfaces and not the simulator'​s menus. The Multipurpose Control and Display Unit (MCDU) is the interface to the flight management computer, which computes the flight plan. In this tutorial we're going to setup a flight plan from Sacramento Intl. (KSMF) to San Francisco Intl. (KSFO) similar to the beginner tutorial above. But this time we're only going to use the cockpit interfaces and not the simulator'​s menus.
Line 644: Line 644:
 ---- ----
  
-==== A320 EFIS Control Panel ==== 
  
-=== Range === +===== V-Speeds and Ranges ===== 
-=== Mode === + 
-=== Raw Data === +[[aircraft:​basic_flight_information|What are the v-speeds?]]
-=== Pressure Setting === +
-===== V Speeds and Ranges =====+
  
 **Speed Limits** **Speed Limits**
aircraft/airbus_a320.1561969640.txt.gz · Last modified: 2019/07/01 10:27 by jh