User Tools

Site Tools


aircraft:boeing_747-400

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
aircraft:boeing_747-400 [2018/02/09 10:16] – [Fully Automatic Landing] apaircraft:boeing_747-400 [2018/07/20 17:47] (current) – [Flight Director] jh
Line 1: Line 1:
 =====Boeing 747-400===== =====Boeing 747-400=====
  
-{{:wiki:747.jpg?700|}}+{{:wiki:747.jpg?450|}}
  
  
Line 58: Line 58:
  
 In a Boeing 747 following the route and climbing and descending is very easy. In a Boeing 747 following the route and climbing and descending is very easy.
-On the ground you set the flight directors to on and arm LNAV and VNAV and the auto throttle (A/T). On the runway you press the TakeOff GoAround (TOGA) button, which can be assigned in the control settings of the Aerofly FS 2, and take off manually. Right after lift off you can engage the autopilot and let if climb in VNAV SPD. Upon reaching the acceleration height the autopilot pitches the aircraft forward and you can retract the flaps. Reching cruise altitude VNAV PATH engages. Prior to the top of descent you reduce the selected altitude and the aircraft will automatically descent on profile. Near the airport APP is pressed to arm the ILS. Configure the aircraft for landing and adjust the MCP speed window for the final approach to VREF and the aircraft can land on its own an come to a complete stop.+On the ground you set the flight directors to on and arm LNAV and VNAV and the auto throttle (A/T). On the runway you press the TakeOff GoAround (TOGA) button, which can be assigned in the control settings of the Aerofly FS 2, and take off manually. Right after lift off you can engage the autopilot and let if climb in VNAV SPD. Upon reaching the acceleration height the autopilot pitches the aircraft forward and you can retract the flaps. Reching cruise altitude VNAV PATH engages. Prior to the top of descent you reduce the selected altitude and the aircraft will automatically descent on profile. Near the airport APP is pressed to arm the ILS. Configure the aircraft for landing and adjust the MCP speed window for the final approach to VREF and the aircraft can land on its own and come to a complete stop.
  
 ==== Flight Mode Annunciator (FMA) ==== ==== Flight Mode Annunciator (FMA) ====
Line 78: Line 78:
  
    * Click the left and right flight director switch with the left mouse button to set the flight directors on or off.    * Click the left and right flight director switch with the left mouse button to set the flight directors on or off.
-   * Right click either switch to set both flight directors on or off 
  
  
aircraft/boeing_747-400.1518167766.txt.gz · Last modified: 2018/02/09 10:16 by ap