This is an old revision of the document!
Aerofly FS 2 supports a wide variety of joysticks and gamepads from various manufacturers. For most of these controllers Awerofly FS 2 also features a default assignment. However, Aerofly FS 2 is fully customizable, so if you want to change a certain function, this can be achieved by using the 'Controls' menu.
Open “Settings” in the main menu and choose “Control” in the submenu. At the bottom of the new window you`ll find the recognized and usable USB-Joysticks. If you don`t find any entries please plug in your joystick once again and wait for a while. Select “Primary” to set up your joystick and proceed as follows:
Proceed as follows to program functions such as like flaps or brakes.
If you want to use separate rudder pedals please proceed as follows:
If you have any problem in programming the buttons or axis on your USB device then please click on the displayed USB device button at the “Primary” menu. After that you`ll see this interface. Here you can enable or disable your USB device and double check all axes and buttons. You can`t program axes or buttons via this interface but check the function.