User Tools

Site Tools


manual:graphics2

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

manual:graphics2 [2018/06/30 02:51] – created jfmanual:graphics2 [2022/07/07 11:16] (current) – removed jh
Line 1: Line 1:
-===== Customizing Your Graphics Settings ===== 
- 
-{{:manual:graphics_quality_2.jpg?600|}} 
- 
-The **Graphics Quality** setting can provide you with specific pre defined quality settings (Low, Medium, High, Ultra), or allow for you to customize your settings field by field (Custom)  
-To enable the individual graphics settings click on “custom”,  this will enable the next five settings. 
-**Note:** Use the (Insane) shadow setting with caution as it will impact performance. Recommended GPU 1080 or higher. 
- 
-===== System Requirements ===== 
- 
-==== Minimum ==== 
-**OS:** Windows 7, Windows 8, Windows 10 (64 Bit Required)  
-**Processor:** Intel Dual core CPU 2.4 GHz 
-**Memory:** 4 GB RAM 
-**Graphics:** OpenGL 3.0 compatible 3D graphic card with at least 1 GB of RAM 
-**Storage:** 35 GB available space 
-**Sound Card:** DirectX Compatible soundcard 
- 
-==== Recommended ==== 
-**OS:** Windows 10 (64 Bit Required)  
-**Processor:** Intel Core i7 CPU 3.0 GHz 
-**Memory:** 16 GB RAM 
-**Graphics:** NVidia 980 GTX 
-**Storage:** 107 GB available space 
-**Sound Card:** DirectX Compatible soundcard 
- 
-In most circumstances you should achieve framerates over 100 in configurations that meet the recommended system requirements.  
- 
- 
-===== Systems: Quality Vs. Performance in VR Guide =====  
- 
-Want ULTRA quality settings, with smooth performance, in VR? Look no further. Through testing and user feedback we put together some scenarios to help you make an informed decision. AeroFly FS 2 in VR provides you some amazing visuals but you will need the horsepower to run it smoothly.   
- 
-==== VR: Recommended Configuration for ULTRA Settings ==== 
-**OS:** Windows 8, 10 64 Bit 
-**Processor:** Intel Core i7 CPU 3.0 GHz 
-**Memory:** 16 GB RAM 
-**Graphics:** NVidia 980 GTX (Latest Driver Version Required) 
-**Render Scale Factor:** 1.25 **Note:** - This setting can be found under **Settings/Virtual Reality** 
-**Limit Frame Rate:** VSync OFF **Note:** This setting can be found under **Settings/Graphic Settings** 
-Oculus Rift or HTC Vive. 
- 
-**Note** - If stuttering occurs in densely populated areas, reducing the **Building Density** will greatly inprove performance with limited graphical degradation.  
- 
-==== VR: Ultimate Configuration for ULTRA Settings ==== 
-**OS:** Windows 10 64 Bit 
-**Processor:** Intel Core i7 CPU 4.0 GHz 
-**Memory:** 32 GB RAM 
-**Graphics:** NVidia 1080 GTX or higher (Latest Driver Version Required) 
-**Render Scale Factor:** 1.50 **Note:** - This setting can be found under **Settings/Virtual Reality** 
-**Limit Frame Rate:** VSync OFF **Note:** This setting can be found under **Settings/Graphic Settings** 
-Oculus Rift or HTC Vive. 
- 
-**Note** - Systems with less than the above configurations can also run Aerofly FS 2 in VR by reducing some graphic settings. Most reductions of graphic settings will not take away from your VR experience. 
- 
-**Note** - If you experience flashing shadows while in VR, reducing the **Shadow Quality** to MEDIUM will reduce the distance that the building shadows are seen but not reduce the overall quality of the shadows rendered. This may improve your VR experience in Aerofly FS 2.  
- 
  
manual/graphics2.1530319896.txt.gz · Last modified: 2018/06/30 02:51 by jf