User Tools

Site Tools


manual:miscellaneous

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
manual:miscellaneous [2017/08/26 03:44]
jf
manual:miscellaneous [2018/03/29 09:17] (current)
aerofly [Broadcasting Flight Information to a Secondary Device]
Line 12: Line 12:
  
 {{:​wiki:​hud.jpg?​700|}} {{:​wiki:​hud.jpg?​700|}}
 +
 +==== Send Flight Data to FSWidgets Apps ====
 +
 +{{:​wiki:​fswidgets_icon.jpg?​200|}}
 +
 +{{:​wiki:​fsw-image.jpg?​700|}}
 +
 +By turning this setting **ON** you can have direct interaction to FSWidgets ​
 +   * 1. Make sure that you turn this on
 +   * 2. The IP address must be set to the IP address that the simulator is running on. 
 +   * 3. Set the port to **58585**
 +   * 4. Download your favorite FSWidget and take to the sky'​s ​
 +
 +{{:​wiki:​fs_setup.jpg?​500|}}
 + 
  
 ==== Broadcasting Flight Information to a Secondary Device ==== ==== Broadcasting Flight Information to a Secondary Device ====
Line 23: Line 38:
 **1.** First turn on this feature. Find **Broadcast Flight Info to IP Address** and switch the setting to **"​ON"​** **1.** First turn on this feature. Find **Broadcast Flight Info to IP Address** and switch the setting to **"​ON"​**
  
-**2.** On your secondary device, download ​the free app **ForeFlight** ​or your preferred app that is capable of receiving flight data over an IP network (LAN or Home Network). **Note** - In this demo we will use ForeFlight on an iPad.+**2.** On your secondary device, download ​a compatible ​app ( for example ​**ForeFlight** ​that is capable of receiving flight data over an IP network (LAN or Home Network). **Note** - In this demo we will use ForeFlight on an iPad.
  
 **3.** Set the **Broadcast IP Address** to your local IP address range, changing the last part to **255**. **Note** - If the local IP address of your PC is 192.168.2.212,​ you should set this setting as 192.168.2.255. To locate your PC's IP address, go to your command line (CMD), and type: ipconfig /all. **3.** Set the **Broadcast IP Address** to your local IP address range, changing the last part to **255**. **Note** - If the local IP address of your PC is 192.168.2.212,​ you should set this setting as 192.168.2.255. To locate your PC's IP address, go to your command line (CMD), and type: ipconfig /all.
manual/miscellaneous.1503711840.txt.gz ยท Last modified: 2017/08/26 03:44 by jf