IPACS

Airbus A319-115 and A319-133

Description

The Airbus A319 is the third aircraft in the A320 series with a shortened fuselage and maximum capacity of 156 passengers and a range of 7000 km. Like all A320 models, the A319 has a modern glass cockpit and fly-by-wire controls.

Depending on the livery the A319 has with two different engine options: A319-115 with CFM56-5B7 (120kN) and the A319-133 with IAE V2527-A5 (110kN) engines as well as Sharklets or wing-tip fences.

Screenshots

Key Features

Physics Simulation

These things are fully simulated in Aerofly FS:

  • Full multibody aircraft that bends under load
  • Natural gear compression and damping
  • Center of gravity shift from gear retraction
  • Thermodynamic engine simulation with individual components for compressor, burner, turbines, drive shafts, fan, reversers and nozzle
  • Simulated full authority digital engine controller (FADEC)
  • Cold and dark startup

Aerodynamics & Flight-Controls

Aerofly FS features a realistic aerodynamics simulation and this aircraft is no exception:

  • Native wing flex simulation
  • Independent simulation of slats, flaps and speedbrakes
  • Auto spoilers and auto brakes
  • Fly by wire (FBW) with direct law, alternate law and normal law with flight, ground and flare modes
  • All real world flight envelope protections are simulated
  • Flap, slat and airbrake protections/inhibits

Aircraft Systems

Custom coded aircraft systems and behaviors specific to this aircraft and based on real world flight manuals:

  • Fully interactive cockpit
  • Full electric network with batteries, buses, generators, dynamic electric switches and individual electrical loads
  • Bleed air flow including cross bleed engine starts
  • Pressurization system
  • Fuel system
  • Hydraulic system

Autopilot and FMS

  • Authentic autopilot behaviors
  • Flight management and guidance system (FMGS) with all managed lateral and vertical modes (NAV, CLB, DES, ALT CST, etc.) and all selected modes
  • Autoland
  • Multifunction Control Display Units (MCDUs) with interactive pages
  • FMGS flight phases
  • Navigation auto-tuning
  • Vapp and ground speed mini

Instrumentation

  • Realistic PFD, ND
  • Realistic ECAM with all system pages
  • Master caution and warning system
  • ECAM warnings, cautions, advisories with ECAM actions
  • Display reversion and source selection
  • Adjustable display, annunciator and panel brightness

3D Model and Animations

  • High quality mesh
  • High resolution textures
  • Dynamic lighting
  • Realistic exterior lights
  • Doors and flight deck windows can be opened
  • Tray table can be pulled out
  • Sun visor can be pulled down
  • Wipers move

Immersive 3D Directional Sounds

  • Fan buzz, exhaust jet noise, N1 and N2 turbine and compressor noises, air starter and engine spool up
  • Custom CFM and IAE engine sounds
  • APU and air conditioning (PACKs)
  • Authentic radar altitude and GPWS callouts
  • Realistic master caution & warning sounds
  • Wind sounds, ground roll, passenger signs, cabin chime …

Tutorials

Get Aerofly FS Now!