Will you accept some orders
yes.
Will you accept some orders
yes.
... und wie ich eben festgestellt habe bei einem spontanem Testflug, sind da noch einige Kacheln mehr zu löschen um den Airport herum. Wie gesagt, ich erstelle später eine Liste. Und ja: Leider sind die ganzen FSCloudPort-Flughäfen für den FS2 nicht kompatibel mit dem FS4 - dann hätten wir wenigstens schon mal etwas mehr an Airports. Aaper Segelflugplatz Düsseldorf wäre auch mal eine Idee.
... and as I just found out during a spontaneous test flight, there are still a few more tiles to be deleted around the airport. Like I said, I'll make a list later. And yes: Unfortunately, all the FSCloudPort airports for the FS2 are not compatible with the FS4 - then we would at least have a few more airports. Aaper glider airfield Düsseldorf would also be an idea.
For completeness: You must find and delete these six files in the original IPACS image "EU" directory so that EDLW is clean:
map_14_8564_ab40
map_14_8568_ab40
map_14_856c_ab40
map_14_8564_ab3c
map_14_8568_ab3c
map_14_856c_ab3c
Also, keine Ahnung, wie es bei Dir in EDLW aussieht - bei mir sieht es im FS2 und FS4 so aus:
Du musst nur beachten, bei Verwendung meiner Photoszenerie im FS4, dass Du einige Dateien aus dem FS4 "EU"-image-Verzeichnis löschen musst, weil die sonst durchploppen. Ich erstelle gerade eine Liste für alle Flughäfen, um Störungen durch den FS4 bei Verwendung meiner Szenerien zu fixen. Du kannst das aber selber auch manuell mit der Aeroszenerie. Es sind immer 14er-Kacheln im Flughafenbereich, die bei IPACS höher aufgelöst sind und aus irgendeinem Grund durchploppen. So kannst Du die Dateien selber finden:
Bei EDLW musst Du also 6 Kacheln löschen, damit es clean ist und so aussieht, wie auf meinen spontanen Shots.
Ich für meinen Teil warte schon seit dem FS2 auf einen F-Schlepp bei Seglern.
Forget the B373 and give us higher res ground textures..
Higher res and seamless restored?
Ok.... :
Most seem to forget what just a complete Europe in really high resolution is for a data set. Is a terabyte enough? Or do you need two? We don't stream anything here, we gain performance because the orthos are on the disk.
Dresdner unter sich! :X
Halt ne Taschenlampe dran - dann ja! :X
Es wäre schön, wenn es einen Scalefaktor für die Außenumgebung unabhängig vom Cockpit gäbe und nicht nur für das Flugzeug allein. Damit Landschaften größer wirken.
It would be nice if there was a scale factor for the external environment independent of the cockpit and not just for the aircraft alone. So that landscapes appear larger.
Part 2 is out now.
I wanted to take the opportunity to present my roadmap:
I complete the complete Iberian Peninsula, then come the Alps with complete Austria and the French Alps. All seamlessly connected and restored. AFTERWARDS I'll probably do Germany completely and AFTERWARDS Scotland and England completely again if that is desired. And Sardinia. For some reason I keep forgetting about that little hole in my seamless landscape.
What I mean by that:
All this costs a lot of NEW storage space, which can no longer be achieved by deleting old files on Flight-sim.org. New storage space costs MONEY and Higgy bears the costs for this all by himself. EVERYONE who downloads something on Flightsim.org should have given 10,-€ AT LEAST ONCE! Even I myself donated 10 euros at the beginning, when all this was still new to me!
If the giving and taking in a community no longer works, it will soon be over very quickly.
I really wanted to have said that once in the hope that my words would fall on fertile ground.
Regards,
i
Good news and bad news:
Good: Part 1 / 2 is out now. Bad: Flight-Sim.org is full.
I need only 8 GB more, to complete uploading this part of spain. All Highres-Areas are missing now ( Santander, Madrid ) and other things.
How can I update this content into simulator?
Go to flight-sim.org and take a look to my ( or other ) content / filebase:
Einträge von „Schnuffelduffel“ suchen - Flight-Sim.org
I recommend installing my stuff in chronological order (because of updates to each other). Installation instructions are always on the download page or in the readme. It's really very simple.