Ok, fits then so for me. I can also get used to the different view control in Aerofly - it's a different simulator .
Posts by VFRPilot
-
-
1. Straight ahead from left seat - zoomed for closeup of 6 pack or glass instruments
2. Slight right from left seat - zoom to avionics panel in GA planes - to set radios and AP
3. Close up of throttle / throttle quadrant to see spoiler arm/flap settings/thrust levers settings.
4. Zoomed up and slight right from left seat for Overhead panel in airliners. (might take two views)
I still like having a view from directly above an airport. Say 800 meters or so, to see the full airport runways/taxiways.
Regards,
Ray
I also find the views mentioned by Ray helpful.
But my idea was that you can zoom to any section in the cockpit or in the plane, save this section with buttons and then call it up again with a button. These views should then be able to be saved individually for each aircraft. I know this from other simulators such as X-Plane or MSFS. I find this function very helpful there and I currently miss it in Aerofly FS. But if this is not so easy to implement, I find more predefined views also helpful (see above).
-
Regarding cameras:
For me the need for custom cameras shows there is a lack of default cameras.
What camera views would you like to see added to our airliners for example?
I want to set a custom view on a certain area in the cockpit (e.g. the 6 standard instruments or the FMC), save this custom view and then recall the same view with one key press.
-
I would like to have custom views that can be set with CTRL+NumKey and launched with NumKey, like in X-Plane.
-
Not to forget the more than 1.200 airports that are included in the new version and that I find extremely good.
-
With the new Aircraft SDK comes the DR400 back .
-
Ja, das ist wirklich sehr schade. Die Piper war eines meiner Lieblingsflieger.
-
-
It seems to affect all aircraft. When I move the throttle forward one step (CL in the Airbus), the throttle in the simulator moves very slowly to this position and then continues to MAN TOGA or full throttle. Only when the throttle is set to reverse on the TCA quadrant does the throttle in the simulator go back to reverse or idle.
I have deleted all other assignments of the throttle axes before and set other control units to OFF. Unfortunately all this did not help.
Other control units (T.A320 Pilot, GoFlight TPM) work as expected. Only the TCA Quadrant is causing the problems.
-
Hi Jürgen,
Go to the controls settings, devices and temporarily disable the throttle quadrant. Then go to through the different control menus and remove all assignments that are still active for the throttle axis, i.e. remove the default throttle slider assignment from your stick base. Then re-enable the throttle quadrant and test it.
Unfortunately, this did not bring any improvement. The throttle axes on the Thrustmaster TCA Quadrant Airbus still do not work correctly.
-
I used only the "elevation" and "images" folder for my scenerys. It works for me perfect with the cultivation of Aerofly FS 4.
-
It worked very well for me (Canary Islands by Taburet, freeware of the Balearic Islands, Hawaii and Italy).
-
Vielen Dank für die Hinweise. Ich kann jetzt die Throttle im Airbus bewegen, allerdings gehen sie von Idle direkt auf die letzte Stufe MAN TOGA ohne die Zwischenstufen zu rasten. Danach gehen sie nicht wieder zurück. Erst wenn ich auf Reverse gehe, kann ich sie auf Idle zurücksetzen. Wie gesagt, im AF FS 2 funktioniert alles wie erwartet und ohne Probleme.
Thank you for the tips. I can now move the throttles in the Airbus, however they go from Idle directly to the last stage MAN TOGA without latching the intermediate stages. They do not go back after that. Only when I go to Reverse can I reset them to Idle. As I said, in AF FS 2 everything works as expected and without problems.
-
In the new AF FS 4, the throttles in the Airbus no longer work with the Thrustmaster TCA Quadrant Airbus Edition. I can move and calibrate the throttles in the settings, but they have no function in the Airbus. The drivers are up to date, the device is calibrated and works in the AF FS 2 without problems. Do others also have the problem and what can be the cause?
-
Thank you HiFlyer for the beautiful video !
BTW we're currently putting the last hand to the AD pack, stay tuned...
Cheers
Antoine
What will be the "AD pack"?
-
Sorry, I had only loaded the second part of the photo scenery and overlooked the first part. Now Mallorca is complete. Thanks again for your work.
-
Hi Schnuffelduffel,
first of all thank you very much for your scnery. But I am missing a large part of the photo sceneries - Menorca is missing completely, as well as a large part of Mallorca. Only Ibiza is completely covered.
-
Auf Nachfrage bei Aerosoft habe ich die Information bekommen, dass das Addon bei Aerosoft nur mit der "hauseigenen" Box- oder Downloadversion von Aerofly FS 2 kompatibel ist. Für Steam muss man auf eine eigene Version warten, die hoffentlich auch bald erhältlich ist.
On request at Aerosoft I got the information that the addon at Aerosoft is only compatible with the "in-house" box or download version of Aerofly FS 2. For Steam you have to wait for your own version, which hopefully will be available soon.
-
Die Just Flight Flugzeuge können auch direkt dort im Shop gekauft und installiert werden. Sie müssen nicht über Steam gekauft werden.
-
I found the problem - the folder with the user files of AFS2 was corrupt.