When I go to Location, click on an airport, click the runway to start from. Aerofly goes back to the main screen. I have version 2.01.05.39 not sure if this is the current update.
Todd
When I go to Location, click on an airport, click the runway to start from. Aerofly goes back to the main screen. I have version 2.01.05.39 not sure if this is the current update.
Todd
Ken,
Thanks for your work on creating the flashing beacon, I tried for weeks to get something that was satisfactory just couldn’t get it right. Yours is excellent.
Todd
Jeff,
I have the two '>' at the end, so the parameter is closed. I have the Hawaii airports (not sure who created it) Dillingham Airport has REIL's and they don't flash either.
Todd
I have entered reil_uni and just uni into the highlighted string below, the REIL's don't show up. Everything else works fine. Am I missing something?
<[tmsimulator_runwaytmslist][runways][]
<[tmsimulator_runway][element][0]
<[tmvector2d][endpoint1][-118.5930160 46.9748984]>
<[tmvector2d][endpoint2][-118.5814744 46.9787899]>
<[tmvector2d][threshold1][-118.5930160 46.9748984]>
<[tmvector2d][threshold2][-118.5814744 46.9787899]>
<[float64][width][15.00]>
<[string8][name1][5]>
<[string8][name2][23]>
<[string8] [appltsys1][std]>
<[string8] [appltsys2][std]>
<[string8] [papi1][none]>
<[string8] [papi2][none]>
<[string8] [reil1][reil_uni]>
<[string8] [reil2][reil_uni]>
Thanks,
Todd
Thanks for the info
Will crossing runways be supported in FSCloudport at some point?
Todd
I created U62-Mckay airport in Idaho. Somehow I accidently made two runways with the same headings, when it uploaded to FSCloudport there's a warning on the download page about the runways, I removed one of the runways, but the warning still shows up, is there way to delete the airport and start over.
Todd
Hello Todd,
Here is an example of how you may get around the runway interference. You may have to try a couple of times to find the distance needed to stop the interference of 10L and 21. It may not be the proximity of 21 and 10L that is actually causing the interference. It may be the parallel runways 10L and 10R that are interfering. In that case there is nothing that I can recommend at this time.
Regards,
Ray (fsCloudBase, Moderator)
Ray,
I will try your solution, and fix the runway heading. The original post was from Deer Park, will fix that too.
Todd
I know the first adjusts the rate of flashing, what do the other three do?
<[light][element][0]
<[vector3_float64][position][-117.3165500 47.6861269 0]>
<[vector3_float32][color][0.1 0.1 0.9]>
<[float32][intensity][3]>
<[vector4_float32][flashing][0 0 0 0]>
<[uint32][group_index][0]>
Thanks,
Todd
How do I take a screenshot while flying, I’ve tried Print Screen, it captures the opening splash screen
Todd
On almost every airport that has photo scenery, there is a white square, one edge is floating off the ground. If I go over it, it’s like going over a speed bump, go to fast the landing gear on the C172 breaks.
FSET 1M, Geo-Converted Levels 9-11-12.
How do I take a snapshot in Aerofly so it can be posted?
Todd
1M at Levels 9-11-12 for large areas, 13-14 for cities and areas around airports. .25 or .50M at Level 15 for airports.
I use 1M at Level 14 around cities and airports, it look pretty good. I’ve done large areas but, takes a long time.
Todd
I followed the wiki for doing alpha blending, when geoconvert is finished, the alpha blending doesn’t show. The TM log, says (files unable to load) and lists the .tiff files
Todd
Another option is to have FSET exclude the tiles you don’t want from downloading.
Todd
Keep us posted on how you get on with this Ed. I am wanting to move all my geoconverted stuff out of the C drive too.
- Kenneth
Kenneth go into Documents, Aerofly FS 2, open main.mcf Find this Line: <[string8] [extra_user_folder] [g:/Aerofly Scenery]>
Change the drive letter to drive you want the scenery on, add Aerofly Scenery folder to the drive. Transfer your scenery over to the new drive.
I can’t remember if I had to add the line.
Todd
I converted an area 60nm x 135nm, with [write_images_with_masks] set to false in the TMC file for all levels in geo convert and I didn’t notice any scenery popping.
The photos that MrRCSound posted is exactly what my scenery does. I convert levels 9,11, and 12. My TMC has level 9 set to create masks, the others are not. So I should convert with masks off on all levels?