I was flying a rnav approach at runway 32L WMKK, when everytime i pushed the approach button during rnav approach the ils displayed flashing in amber and the l/dev and v/dev doesn't displayed on the pfd.
A320 rnav approach didn't work
-
I've noticed same in PC
-
- Official Post
Please post a screenshot of the route, so that we can try and replicate it.
You may also have to disable the assistance for automatic frequency tuning in the settings, otherwise the assistance will automatically tune the ILS frequency for the runway you are approaching and with that the autopilot (at least currently) thinks you want to fly the ILS. This is desirable because most people do not go to the navigation menu to select the approach and then go into the simulation and actually fly it.... most of the times you just select final approach on an airport and regardless of your route the ILS approach will be pre-selected and is ready to be used.
-
Here's the screenshot of the route and i did turned off the auto tunning since I bought this game and it still tunning to the ils itself.
-
- Official Post
Here's the screenshot of the route and i did turned off the auto tunning since I bought this game and it still tunning to the ils itself.
Ok, thank you. It looks like this is not the assistance tuning the frequency because the frequency would then be in a larger font size. The small font size indicates that the FMS automatically tuned the frequency for the ILS, it should not do that if no ILS approach is planned.
-
Hello Jet-Pack
I noticed the same bug yesterday landing at ENTC rwy 18, so despite selecting RNAV procedure on flight planner and confirming on FMGC, the ILS was there.