New AeroFly FS2 user - observed issues

Christopher Low · January 1, 2017 at 10:40 PM

As a new user of AeroFly FS2, I just wanted to post details of one or two issues that I have noted after my first experience with the simulator.....

KPRC Ernest A Love Field Runway 03L displaced threshold arrows skewed off to the right
No compression of nose landing gear on Learjet 45 when braking
Autogen trees in lakes (seen near North Las Vegas, but probably also elsewhere)

I will keep providing updates as and when I see anything that I think requires your attention, but please let me know if you want me to send this information via PM or email.

HiFlyer · January 1, 2017 at 11:12 PM

Its probably time the forum gets a problem reports section. Things are beginning to get confusing.

Christopher Low · January 2, 2017 at 9:22 AM

It also seems like the Learjet 45 has some kind of inertia problem when rolling to a stop. It seems to "wobble" slightly, almost as if it has very little weight.

Jet-Pack (IPACS) · January 2, 2017 at 10:18 AM Official Post

In my latest developer version of the Learjet 45 ( from last year still... ) I have modified the landing gear, I hope this will also fix the issues that you mentioned here.

Christopher Low · January 2, 2017 at 2:02 PM

Aircraft "bounces up" rather violently when selecting a landing approach. A solution for this issue would be very welcome
Contact a trusted US government source for higher resolution terrain textures for Area 51

IPACS Support · January 2, 2017 at 2:30 PM

If you have bugs to report, please use our special support section here:

https://www.aerofly.com/aerofly_fs_2/support

Almdudler · January 2, 2017 at 2:59 PM

Quote from Jet-Pack

In my latest developer version of the Learjet 45 ( from last year still... ) I have modified the landing gear, I hope this will also fix the issues that you mentioned here.

Don't screw up with the learjet. Seems to be okay at current state, any change will screw.

Christopher Low · January 2, 2017 at 3:20 PM

Thanks for providing a link to report bugs/issues.