Posts by HerveF

    I'm glad to read that so talented gentlemen here are involved in using such a potential powerful tool for scenery design : it is a chance for our community :)


    Thank you !

    Argivo ! After your fantastic present with your Dornier (once again, many thanks !), do you plan to build a new plane ? Or some kind of other liveries for the Dornier ?


    Looking forwards hearing from you,


    Friendly regards

    I'm slowly having more time again, but I used the weekend to finish off some other small project. I don't think that I get it uploaded today, but latest tomorrow. Then I'm fully back at the Bücker and Cub.


    Kai

    Great ! looking forwards the Bücker AND the Carbon Cub, my favorite dream plane :)

    ... and the piper cub or the c170b with retractable skis and wheels :)

    ahhh ok thank you TomB..... I thought it was possible just to have the "pylons" of all cableway, gondola, chairlift, t-bar and so on.... with some kind of simplified "standart" models..... like it works with Electricity Pylons in Pylogen.exe.


    Ok, now it is not possible, at last to "cultivate" big ski resorts like Switzerland: each of these has a mix of differents aerialways....


    But to have already the Elecricity Pylon is great !!!!


    Anyway, thank you for your help !


    Happy weekend

    ok thank you all ! That means that to have all the cabke_car/gondola/chair lift/t-bar and so on of a ski station resorts, I need to put ALL these in the example.tsc ? Right ?

    ok. by my example.tsc, I find this entries:


    <andCriteria>

    <keyValueEntry key="aerialway" value="gondola" />

    <!-- occupency tag can be used to process aerialways of a certain type with appropriate sized towers.

    Requires additional way configuration for each type.

    -->

    <keyValueEntry key="aerialway:occupancy" value="8" />

    </andCriteria>

    </selectionCriteria>


    Do it means I have to change the entries with the same names/values as yours, or shoud I have to ADD more key entries.


    A question: how did you find the "cable_car" value ? From where do you know that ? And what means "8" or "30" ??? A skilift, for example, what will be the "name" and the value ? "2" ? "1" (if it means the number of persons ????


    Thx, I'm totally new

    Ok, finally it worked !!! Thank you Stu and Tom !


    But curiously, when I have a look on my .tsc, only few aerialways and skilifts are written..... In the Saanen area for example, on google street map you see more than 20.... I make the selection square, save by overpassing API, then run your .exe, all is ok, but few aerialways and stations are present in the final .tsc


    Any ideas ?


    Thx

    what did you provide as the second argument to PylonGen?

    Hello Stu,


    In Pylogen.exe, I simply "put " map.osm over Pylogen.exe, and all worked at the first try...


    Here I'm successfull doing some .tsc, but NOTHING appear in the simulator..... As far as I know, I put exactly the same folder (parents, grandparents) structure in the "zip" deployed structure.....


    I'll continue to try....

    If you are kind enough to ahve a look at my "example.tsc".... Do you think all is as it has to be ?¨


    Thx


    <?xml version="1.0" encoding="utf-8"?>

    <osm2AFSobjectConfiguration xmlns="urn:osm2AFSobject-schema">


    <!--


    See osm2AFSobjectConfiguration.svg and osm2AFSobjectConfiguration.xsd for documentatin of the schema

    Best viewed from Firefox or Chrome browsers

    -->

    <relativePathPrefix>"..\..\..\..\objects\"</relativePathPrefix>


    <!-- ============================================================================================ -->

    <!-- power line scenario -->

    <wayConfiguration>

    <selectionCriteria>

    <andCriteria>

    <keyValueEntry key="power" value="line" />

    </andCriteria>

    </selectionCriteria>

    <explicitModelNameKey>"model"</explicitModelNameKey>

    <defaultModelName>"PowerPylons\6-cables\6-cables"</defaultModelName>

    <referencedNodes>

    <selectionCriteria>

    <andCriteria>

    <keyValueEntry key="power" value="tower" />

    </andCriteria>

    </selectionCriteria>

    <modelNameMapping>

    <mapEntry key="cables" value="3" modelName="PowerPylons\3-cables\3-cables"/>

    <mapEntry key="cables" value="4" modelName="PowerPylons\4-cables\4-cables"/>

    <mapEntry key="cables" value="6" modelName="PowerPylons\6-cables\6-cables"/>

    <mapEntry key="cables" value="8" modelName="PowerPylons\8-cables\8-cables"/>

    <mapEntry key="cables" value="10" modelName="PowerPylons\10-cables\10-cables"/>

    </modelNameMapping>

    </referencedNodes>

    </wayConfiguration>



    <!-- ============================================================================================ -->

    <!-- ski lift scenario -->

    <wayConfiguration>

    <selectionCriteria>

    <andCriteria>

    <keyValueEntry key="aerialway" value="gondola" />

    <!-- occupency tag can be used to process aerialways of a certain type with appropriate sized towers.

    Requires additional way configuration for each type.

    -->

    <keyValueEntry key="aerialway:occupancy" value="8" />

    </andCriteria>

    </selectionCriteria>

    <explicitModelNameKey>"model"</explicitModelNameKey>

    <defaultModelName>"AerialWays\LiftTower\LiftTower"</defaultModelName>

    <referencedNodes>

    <!-- no selection criteria. process all nodes on the way.

    Scenario relies on explicit model name on aerialway="station" nodes.-->

    <modelNameMapping>

    <mapEntry key="aerialway" value="pylon" modelName="AerialWays\Lift_Tower\lift_tower"/>

    </modelNameMapping>

    </referencedNodes>

    </wayConfiguration>


    <!-- ============================================================================================ -->

    <!-- storage tank scenario using circumferance way -->

    <wayConfiguration>

    <selectionCriteria>

    <andCriteria>

    <keyValueEntry key="man_made" value="storage_tank" />

    </andCriteria>

    </selectionCriteria>

    <explicitModelNameKey>"model"</explicitModelNameKey>

    <defaultModelName>"StorageTanks\40MDome\40Mdome"</defaultModelName>

    <oneObject>"true"</oneObject>

    </wayConfiguration>



    <!-- ============================================================================================ -->

    <!-- storage tank from center point node -->

    <nodeConfiguration>

    <selectionCriteria>

    <andCriteria>

    <keyValueEntry key="man_made" value="storage_tank"/>

    </andCriteria>

    </selectionCriteria>

    <explicitModelNameKey>"model"</explicitModelNameKey>

    <defaultModelName>"StorageTanks\20mflat\20Mflat"</defaultModelName>

    </nodeConfiguration>


    <!-- ============================================================================================ -->

    <!-- windmill scenario with animation specification-->

    <nodeConfiguration>

    <selectionCriteria>

    <andCriteria>

    <keyValueEntry key="power" value="generator"/>

    <keyValueEntry key="generator:source" value="wind_turbine"/>

    </andCriteria>

    </selectionCriteria>

    <explicitModelNameKey>"model"</explicitModelNameKey>

    <defaultModelName>"Windmills\25M\25M"</defaultModelName>

    <modelNameMapping>

    <mapEntry key="height" value="70" modelName="Windmills\70M\windturbine_v39_70m_0_5">

    <animation rotation_in_degrees="90.0" duration ="0.0" time_scale="1.2"/>

    </mapEntry>

    <mapEntry key="height" value="90" modelName="Windmills\90M\90M"/>

    <mapEntry key="height" value="200" modelName="Windmills\200M\windturbine_e126_200m_2_0">

    <animation rotation_in_degrees="90.0" duration ="0.0" time_scale="2.0"/>

    </mapEntry>

    </modelNameMapping>

    </nodeConfiguration>

    </osm2AFSobjectConfiguration>

    Thx you very much for your help.... I replaced the original untouched example.xml (with relative path), and really got the same relative structure (but not the same SSD - my final .tsc folder is on C: but the working folder ion "G:" -but anyway that ios not important, right ?


    I'll try again and again...


    Pylongen.exe was working at the first try.... I still cannot understand what am I doing wrong...

    Ok thx


    now i'm successfull rendering the .tsc


    But nothing appear ! Clearly probably it is linked to the objects relative path...


    Here my example.tsc. Do you think you can see the problem ? Notice I only changed at the begining relative path to objects (where resides my AF2 addon folders, succesfull with pylongen tsc):


    <?xml version="1.0" encoding="utf-8"?>

    <osm2AFSobjectConfiguration xmlns="urn:osm2AFSobject-schema">


    <!--


    See osm2AFSobjectConfiguration.svg and osm2AFSobjectConfiguration.xsd for documentatin of the schema

    Best viewed from Firefox or Chrome browsers

    -->

    <relativePathPrefix>"C:\Users\Hervé\Documents\Aerofly FS 2\scenery\places\Autogen ch West PowerPylons\objects\"</relativePathPrefix>


    <!-- ============================================================================================ -->

    <!-- power line scenario -->

    <wayConfiguration>

    <selectionCriteria>

    <andCriteria>

    <keyValueEntry key="power" value="line" />

    </andCriteria>

    </selectionCriteria>

    <explicitModelNameKey>"model"</explicitModelNameKey>

    <defaultModelName>"PowerPylons\6-cables\6-cables"</defaultModelName>

    <referencedNodes>

    <selectionCriteria>

    <andCriteria>

    <keyValueEntry key="power" value="tower" />

    </andCriteria>

    </selectionCriteria>

    <modelNameMapping>

    <mapEntry key="cables" value="3" modelName="PowerPylons\3-cables\3-cables"/>

    <mapEntry key="cables" value="4" modelName="PowerPylons\4-cables\4-cables"/>

    <mapEntry key="cables" value="6" modelName="PowerPylons\6-cables\6-cables"/>

    <mapEntry key="cables" value="8" modelName="PowerPylons\8-cables\8-cables"/>

    <mapEntry key="cables" value="10" modelName="PowerPylons\10-cables\10-cables"/>

    </modelNameMapping>

    </referencedNodes>

    </wayConfiguration>



    <!-- ============================================================================================ -->

    <!-- ski lift scenario -->

    <wayConfiguration>

    <selectionCriteria>

    <andCriteria>

    <keyValueEntry key="aerialway" value="gondola" />

    <!-- occupency tag can be used to process aerialways of a certain type with appropriate sized towers.

    Requires additional way configuration for each type.

    -->

    <keyValueEntry key="aerialway:occupancy" value="8" />

    </andCriteria>

    </selectionCriteria>

    <explicitModelNameKey>"model"</explicitModelNameKey>

    <defaultModelName>"AerialWays\LiftTower\LiftTower"</defaultModelName>

    <referencedNodes>

    <!-- no selection criteria. process all nodes on the way.

    Scenario relies on explicit model name on aerialway="station" nodes.-->

    <modelNameMapping>

    <mapEntry key="aerialway" value="pylon" modelName="AerialWays\Lift_Tower\lift_tower"/>

    </modelNameMapping>

    </referencedNodes>

    </wayConfiguration>


    <!-- ============================================================================================ -->

    <!-- storage tank scenario using circumferance way -->

    <wayConfiguration>

    <selectionCriteria>

    <andCriteria>

    <keyValueEntry key="man_made" value="storage_tank" />

    </andCriteria>

    </selectionCriteria>

    <explicitModelNameKey>"model"</explicitModelNameKey>

    <defaultModelName>"StorageTanks\40MDome\40Mdome"</defaultModelName>

    <oneObject>"true"</oneObject>

    </wayConfiguration>



    <!-- ============================================================================================ -->

    <!-- storage tank from center point node -->

    <nodeConfiguration>

    <selectionCriteria>

    <andCriteria>

    <keyValueEntry key="man_made" value="storage_tank"/>

    </andCriteria>

    </selectionCriteria>

    <explicitModelNameKey>"model"</explicitModelNameKey>

    <defaultModelName>"StorageTanks\20mflat\20Mflat"</defaultModelName>

    </nodeConfiguration>


    <!-- ============================================================================================ -->

    <!-- windmill scenario with animation specification-->

    <nodeConfiguration>

    <selectionCriteria>

    <andCriteria>

    <keyValueEntry key="power" value="generator"/>

    <keyValueEntry key="generator:source" value="wind_turbine"/>

    </andCriteria>

    </selectionCriteria>

    <explicitModelNameKey>"model"</explicitModelNameKey>

    <defaultModelName>"Windmills\25M\25M"</defaultModelName>

    <modelNameMapping>

    <mapEntry key="height" value="70" modelName="Windmills\70M\windturbine_v39_70m_0_5">

    <animation rotation_in_degrees="90.0" duration ="0.0" time_scale="1.2"/>

    </mapEntry>

    <mapEntry key="height" value="90" modelName="Windmills\90M\90M"/>

    <mapEntry key="height" value="200" modelName="Windmills\200M\windturbine_e126_200m_2_0">

    <animation rotation_in_degrees="90.0" duration ="0.0" time_scale="2.0"/>

    </mapEntry>

    </modelNameMapping>

    </nodeConfiguration>

    </osm2AFSobjectConfiguration>