A380 Question
-
-
- Official Post
-
OK Thanks 👍
-
-
- Official Post
THS = trimmable horizontal stabilizer, that is the pitch trim value. Insert something like 25.0% or so.
Rule of thumb is, if you don't know the value try double clicking the field to insert a suggested value. This is a cheat and not realistic but very convenient.
-
THS = trimmable horizontal stabilizer, that is the pitch trim value. Insert something like 25.0% or so.
Rule of thumb is, if you don't know the value try double clicking the field to insert a suggested value. This is a cheat and not realistic but very convenient.
OK Thanks 👍
-
ThomK the ths is mostly given on the lower section of the pfd. you'll see 39.1 or 42.6% on the pfd screen in amber colour
-
- Official Post
ThomK the ths is mostly given on the lower section of the pfd. you'll see 39.1 or 42.6% on the pfd screen in amber colour
The PFD shows the current pitch trim value and, after inserting it into the FMS, it shows a magenta pitch trim target value. You should not copy the current pitch trim angle into the FMS as your target pitch trim value, that defeats the purpose of the weight and balance computation.