We can do it in pieces, no problem 
Parts of Norway would be very much appreciated if data is available.
Adding powerline pylons can be done with OSM data and the object generation utility
Hi Michael
Not that I am aware of. There is a discussion thread about the utility here. And there is a user guide in the download and a sample xml-file which can be used and modifyed for own purposes. The rest is trial and error. I am by no means an expert.
I recommend to run the test.bat in the Test folder and copy the generated tsc and toc file to places.
Then have a look at the Geneve lake for the result.
Now look at the code.
Very useful for parking cars is #0.7.3.0
and #0.5.1.1. for Pylons
Excerpt from test.xml
<!-- ============================================================================================ -->
<!-- #0.5.1.1 #AND# #OR# condition
Expected Results:
- first and last nodes are 6 cable
- red error X does not show since non matching nodes are not rendered
-->
<wayConfiguration>
<selectionCondition expression="($power == 'line' #AND# $test:case == '#0.5.1.1.1 #AND# #OR# condition')"/>
<defaultModel>
<staticModel name="TestCases\error"/>
</defaultModel>
<referencedNodes>
<selectionCondition expression="($power == 'tower' #AND# $test:case == '1') #OR# ($power == 'tower' #AND# $test:case == '2')"/>
<modelMap>
<staticMapEntry expression="($power == 'tower')" name="PowerPylons\6-cables\6-cables"/>
</modelMap>
</referencedNodes>
</wayConfiguration>
<!-- alternate expression -->
<wayConfiguration>
<selectionCondition expression="($power == 'line' #AND# $test:case == '#0.5.1.1.2 #AND# #OR# condition')"/>
<defaultModel>
<staticModel name="TestCases\error"/>
</defaultModel>
<referencedNodes>
<selectionCondition expression="($power == 'tower') #AND# ($test:case == '1' #OR# $test:case == '2')"/>
<modelMap>
<staticMapEntry expression="($power == 'tower')" name="PowerPylons\6-cables\6-cables"/>
</modelMap>
</referencedNodes>
</wayConfiguration>Martin, you might try this link from Geofabrik:
http://download.geofabrik.de/europe/france/corse-latest.osm.bz2
Cheers,
Thomas
the unpacked file has 535MB
You can process a smaller part of it with this Scenproc line (adjust name and coordinates):
ImportOGR|D:\OSM\obb.osm|11.870141;12.585572;48.302552;48.406537|*|NOREPROJ
