The aircraft is on the ground and yet the TOD indicator appears on the navigation display screen. Jet-Pack (IPACS) This bug occurs on all Boeing planes.
Please post a screenshot of the route in the navigation menu and please confirm that you entered a cruise altitude as well.
Please post a screenshot of the route in the navigation menu and please confirm that you entered a cruise altitude as well.
I entered a cruising altitude of 35,000 feet. As you can see, the aircraft is on the ground and yet the TOD indicator appears on the navigation display screen.
As we well know, the TOD indicator should only appear when the aircraft is at cruising level and about to begin its descent. The TOC indicator should appear when the aircraft is about to stabilize at the cruising level. In short: these indicators should never appear before the right moment, much less when the aircraft is on the ground. Jet-Pack (IPACS)
I entered a cruising altitude of 35,000 feet. As you can see, the aircraft is on the ground and yet the TOD indicator appears on the navigation display screen.
As we well know, the TOD indicator should only appear when the aircraft is at cruising level and about to begin its descent. The TOC indicator should appear when the aircraft is about to stabilize at the cruising level. In short: these indicators should never appear before the right moment, much less when the aircraft is on the ground. Jet-Pack (IPACS)
If you haven't set the cruise altitude then the aircraft probably thinks it's zero and therefore thinks you already are at cruise altitude and thus shows the TOD indication. Have you entered it in the CDU or through the navigation menu?
If you haven't set the cruise altitude then the aircraft probably thinks it's zero and therefore thinks you already are at cruise altitude and thus shows the TOD indication. Have you entered it in the CDU or through the navigation menu?
I entered the cruising altitude in both the autopilot panel and the FMC. Before the latest updates, these indicators appeared correctly and at the right time, that is, the TOC appeared when the aircraft was about to stabilize at the cruising level and the TOD when the aircraft was about to begin its descent. In my understanding, the fact that these indicators appear when the aircraft is still on the ground is a bug.
I entered the cruising altitude in both the autopilot panel and the FMC. Before the latest updates, these indicators appeared correctly and at the right time, that is, the TOC appeared when the aircraft was about to stabilize at the cruising level and the TOD when the aircraft was about to begin its descent. In my understanding, the fact that these indicators appear when the aircraft is still on the ground is a bug.
Does it go away if you got to the navigation menu and change the cruise altitude there?
Does it go away if you got to the navigation menu and change the cruise altitude there?
It doesn't disappear if I enter the cruising altitude in the navigation menu.
I also face this problem here. With the aircraft on the ground, the TOD indicator appears on the navigation display screen. This bug occurs on all Boeing aircraft. Furthermore, after takeoff, the TOC indicator appears before the aircraft even reaches cruising altitude.
Another thing I recently encountered on the new a321. When I was flying enroute, the T/D is showing incorrectly.
Ps. I was cruising at around FL210 and I already put cruising altitude into MCDU but the TD indicator kept following the little airplane icon it should be shown at some point on the route map. Please check out the attachment.
Another thing I recently encountered on the new a321. When I was flying enroute, the T/D is showing incorrectly.
Ps. I was cruising at around FL210 and I already put cruising altitude into MCDU but the TD indicator kept following the little airplane icon it should be shown at some point on the route map. Please check out the attachment.
Boeing planes also have this same problem.
Same problem for me too.
I also have the same problem.
Hello good evening dear devs. First of i really thanks that you guys have done a great job again for giving us this another great update with great stuff. A321 is awesome and really thanks for the new liveries specially PIA livery for b777.
My problem is that yesterday when i updated the beta, the new a321 sound was realistic. And working great yesterday. But today it is similar to a320. Although i have restarted the sim various times. I have also restarted my phone. But no luck.
Hello good evening dear devs. First of i really thanks that you guys have done a great job again for giving us this another great update with great stuff. A321 is awesome and really thanks for the new liveries specially PIA livery for b777.
My problem is that yesterday when i updated the beta, the new a321 sound was realistic. And working great yesterday. But today it is similar to a320. Although i have restarted the sim various times. I have also restarted my phone. But no luck.
Please check that you select an aircraft repaint with the IAE engines. The CFM engines on the A321 sound similar to the CFM engines on the A320.
Please check that you select an aircraft repaint with the IAE engines. The CFM engines on the A321 sound similar to the CFM engines on the A320.
Ohhh yes. It was the mistake from my side. I didn't have the understanding of the engine difference. Thanks for your immediate response.
Regards!
I also face this problem here. With the aircraft on the ground, the TOD indicator appears on the navigation display screen. This bug occurs on all Boeing aircraft. Furthermore, after takeoff, the TOC indicator appears before the aircraft even reaches cruising altitude.
I found the same problems on the A320, A320 and A380, in short all commercial aircraft have this bug
Jet-Pack (IPACS) Were you able to identify the TOD bug? In an email I sent to you, I told you more or less how to recreate this bug
I am using an iPhone 13, I’ve done my first flight with the A321, which looks really nice. However I have noticed few issues on the beta.
1 : Airport when you are flying above them are full black like if they were not textured.
2 : The writing on the A321 overhead display are super blurry.
3 : In several airport, LFMN included there are not jet bridges.
The Airbus A321 is really impressive, and it's great that the PTU has been added to the A320. Now, it would be nice if the new Air France livery could be imported onto the A320. As for the issues I've noticed: the cargo doors do not open, there are floating textures visible when doors are open, and the sun visor is too dark; it would be better if it were lighter so we could see when it's in use. Additionally, it would be appreciated if the "Annecy" text could be removed from the livery to give it a more neutral appearance for flying other routes.
It would also be nice to have the weather radar displayed, along with cabin ambiance and ATC communications integrated into the FMS, with the ability to activate or deactivate them as desired.
iPhone 14 Pro Max IOS
@Rafale 17F: Missing jet bridges and blurry textures are a necessary optimization for devices with low memory. So this is ok. The black textures are not ok however, can you send screenshot?
You will fix the T/C and TOD bug.?
@Rafale 17F: Missing jet bridges and blurry textures are a necessary optimization for devices with low memory. So this is ok. The black textures are not ok however, can you send screenshot?
Ipad 9, sim 1.01.02
I can if that helps. I saw something similar at Grenchen and Hahnweide.
This is what it looks like up close. As I move forward, the black part moves like a mirage in front of me. It even disappears from a certain angle.
